Tender For Estimate For Repair & Renovation Of Eco Retreat Hub At Gopalpur
Tender Value
81.60 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
9 days left
EMD
82000
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Repair & Renovation Of Eco Retreat Hub At Gopalpur
BOQ
| Sl. No. | Item Description |
| 1 | Repair Works |
| 2 | Clearing of weeds, unwanted vegetation and wild growth from garden areas by manual means, including uprooting/removal of weeds, grass and small unwanted plants from the soil, collection, loading, and disposal of the removed vegetation from garden and landscaping area, complete as directed by the Engineer-in-Charge. |
| 3 | Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth. |
| 4 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 5 | P.C.C (1:3:6) with 40mm size Crosser broken hard granite metal with cost of all labour & materials. |
| 6 | Brick masonary using Fly ash bricks in CM(1:6) in foundation and plinth with cost of all labour and materials, etc complete.(23X11X8) |
| 7 | Brick masonary using Flyash bricks in CM (1:6) in Super-Structure with cost of all labour and materials, etc complete.(230x110x80) |
| 8 | Solid C.C Block masonry work having crushing strength not less than 75 kg/sqcm of size 300 mm x 200 mm x 150 mm in cement mortar(1:4) in fdn. and plinth. |
| 9 | Form Work for concrete in structers with finish using wooden planks & bullahs etc complete floors,roof slab,landings, balcony, chajja, shunshed |
| 10 | Form Work for concrete in structers with finish using wooden planks & bullahs etc complete R.C.C foundation, column base, mass concrete, plinth band. |
| 11 | Form Work for concrete in structers with finish using wooden planks & bullahs etc complete Column & Beam |
| 12 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying |
| 13 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying |
| 14 | Supplying, fitting and placing uncoated HYSD bar Reinforment complete as per drawing and techincal specification. |
| 15 | 12mm thick Cement plaster (1:6) for brick work including cost conveyance and royality etc complete. |
| 16 | 16 mm thick cement plaster in (1:6) with cost of all labour & materials. |
| 17 | 6 mm thick Cement Plaster (1:4) to concrete surface. |
| 18 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even receive painting including cost of scaffolding surface to staging charges with cost of all materials taxes, labour T&P etc complete. |
| 19 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height |
| 20 | Priming one coat with water based wall primer over plastered surface |
| 21 | Finishing walls with weather coat paint two coat of approved quality |
| 22 | Wall painting two coats with Plastic emulsion paints of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 23 | Wall painting two coats with Exterior Acrylic Plastic emulsion paints of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C. |
| 24 | Priming one coat with any approved primer (Iron work) |
| 25 | Painting two coats with Synthetic Enamel paint to interior surface |
| 26 | 2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete. |
| 27 | Fixing tiles in floors treads or steps and landing Fixing tiles in floors treads or steps and landing (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1 sqm |
| 28 | Providing, fitting and fixing Vitrified tile in floor of size 600x600 mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar 1:4 (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-In-Charge |
| 29 | Fixing Mangalore pattern tiles on roof slabs and risers of steps over 12 mm thick cement plaster in cement mortar 1:6, including jointing with neat cement slurry mixed with approved pigment to match the shade of the tiles, complete in all respects. |
| 30 | Steel work in built up (round, square or rectangular hollow tubes) trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 31 | Supplying all materials,labour and T&P for fixing G.C.I. sheet in roof drilling holes in wind ties including fixing of ridges valleys wind ties etc. complete |
| 32 | Providing & Fixing of WPC Door Frame size 5\\" x 2.5\\" having density 725kg/m3, make up of virgin polymer, wheat and rice husk fiber and Calcium silicate. 100% water proof, termite proof and fire retardant made of Alstone Chaukhat. The door will be provided with all necessary fitting & fixture of approved hardware and all materials complete as per direction of the Engineer-In-Charge. |
| 33 | Providing & fixing WPC Door Shutter of thick 30mm Shutter having density 660kg/m3 make up virgin polymer with wheat and rice husk fiber. 100% water proof, termite proof and fire retardant made of Alstone WPC Door. The door will be provided with all necessary fitting & fixture of approved hardware and all materials complete as per direction of the Engineer-In-Charge |
| 34 | Providing, supplying and fixing factory-fabricated multi-chamber uPVC sliding window with galvanized steel reinforcement, 5 mm thick glass, EPDM gaskets, heavy-duty rollers, multipoint locking system, handles, brush seals, drainage arrangement, SS/GI fixing accessories and weatherproof silicone sealant, complete in all respects as per approved drawings and specifications. |
| 35 | Providing and fixing of Hydraulic Door Closers Heavy Duty (UL rated -68 kg.) of Dorma/Godrej/Hettich or of any other equivalent approved make/quality including all fittings etc. all complete |
| 36 | Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. |
| 37 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete SP - 63:2018. in all respect conforming to IRC |
| 38 | Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. IS 5758:1984 complete |
| 39 | Providing and supplying Door Mat made of heavy-duty coir / nylon material with anti-skid backing, suitable for entrance use, of approved size, colour and design, including all necessary fittings and finishing, complete as per specification and direction of the Engineer-in-Charge. |
| 40 | Providing and fixing low-height storage unit made of 19 mm thick pre-laminated BWR Plywood board with 1 mm decorative laminate finish, PVC edge banding, shelves/shutters, hinges, handles and necessary hardware, complete as per approved design, size, colour and finish. |
| 41 | Providing and fixing heavy-duty precast RCC ventilator of approved size and design, manufactured from M20/M25 grade cement concrete with adequate MS/TMT reinforcement, properly compacted and cured, including moulding, smooth finish, transportation and fixing in position with cement mortar 1:4, complete as per approved drawing and direction of Engineer-in-Charge. |
| 42 | Dismantling Work |
| 43 | Dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 44 | Dismantling and Removing R.C.C. columns beams slab staircase landing lintels including stacking the userful materials for reuse and removing the debris within 50m lead |
| 45 | Dismantling and removing doors, windows, and ventilators including removal of frames, hinges, fastenings and stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 46 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead |
| 47 | Dismantling and removing lime concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris within 50m lead |
| 48 | Dismantling Brick / Tile work in cement mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres |
| 49 | Plumbing Work |
| 50 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 15mm diameter |
| 51 | 25mm diameter |
| 52 | 32mm diameter |
| 53 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. Providing and fixing 15mm dia CP Bib Cock long body |
| 54 | Providing and fixing 15mm dia CP pillar Cock body |
| 55 | Stainless steel jali grating with hole of floor / nahani trap |
| 56 | Providing and fixing 15 mm CP 2 in 1 Bib cock |
| 57 | 15mm dia CP Health Faucet 1.0mtr long |
| 58 | Providing and fixing 150 mm dia Shower |
| 59 | Providing & fixing Flushing cistern PVC 10ltr capacity (low level) white with all fittings accessories and flush pipe of Hindware sleek fresh single flush Starwhite. with a pair of PVC brackets complete |
| 60 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification |
| 61 | Fixing PVC inlet pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification |
| 62 | Fixing wash Down water closet , (European type W.C Pan) confirming to IS 2556: Part 8 -2004 ,to the floor with wooden plug and chromium plated screws joining the trap with soiil pipe in c.m(1:1) etc all complete as per specification. |
| 63 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm diameter |
| 64 | 110mm diameter |
| 65 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 66 | Bevelled Edge Mirror |
| 67 | Fixing of Brass Screw-down Stop Cocks conforming to IS:781-1995 of the following nominal sizes as per specification complete. |
| 68 | Fixing of 15mm dia C.P.angular stop cock conforming to IS:781-1995 of the following nominal sizes as per specification complete. |
| 69 | C.P. flange(Big) |
| 70 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification |
| 71 | C.P.soap holder/disc. Each |
| 72 | C.P. towel rail.(600x20)mm |
| 73 | Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. |
| 74 | Providing, supplying, installation, testing and commissioning of automatic water sprinkler irrigation system, comprising sprinkler heads/nozzles, risers, laterals, PVC/HDPE pipes, valves, fittings, pressure regulators and necessary accessories, complete with connection to the existing/proposed water supply system, for uniform and controlled distribution of water in a rainfall-like pattern over lawns, gardens and landscaped areas, including all necessary supports, joints, clamps, excavation, laying, testing and commissioning, complete as per approved design and direction of Engineer-in-Charge. |
| 75 | Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts ,fixinf ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge. |
| 76 | Supplying all Material & T&P for KSB Make Power Driven Centrifugal Vertical 1.5 HP , 1 Ph. Submersible Pump Set , As Per Direction Of Engineer-In-Charge . Model No. :- CORA 50 / 18 + RLX - S - 1.5 HP |
| 77 | Electrical Works |
| 78 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S) Group-A -L.P- F.P- C.B.P- |
| 79 | Group-B -L.P- F.P- C.B.P- |
| 80 | Group-C L.P- F.P- C.B.P- |
| 81 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type ) |
| 82 | Supply and fixing of 2 no.s of 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and 1 nos of S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover. |
| 83 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 1.5sq.mm +1 X 1.5sqmm |
| 84 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 85 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 86 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 87 | Supply and fixing of different type of fitting with lamp S/F of 9Watt LED bulb fitting (Make-Havells/Philips/C&S/Crompton) |
| 88 | S/F of 20Watt LED bulb fitting (Make-Havells/Philips/C&S/Crompton) |
| 89 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 90 | S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 91 | S/F of 3Watt/2Watt Circular Surface down light LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 92 | S/F of 45W LED street light fitting (Make-Havels/Philips/ Bajaj/ Crompton/Helonix) |
| 93 | S/F of 120 W LED street light fitting (Make-Havels/Philips/Bajaj) |
| 94 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 95 | S/F of spot light LED/LED Canopy light, 30watt(LCNR-80-CDL) |
| 96 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard) S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/ Polycab/Bajaj/V-Guard |
| 97 | Exhaust fan 450mm |
| 98 | Wall mounted fan 400mm |
| 99 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) |
| 100 | 40 Amp DP MCB |
| 101 | 63Amp DP MCB |
| 102 | 40 Amp 4P MCB |
| 103 | 63 Amp 4P MCB |
| 104 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 2 WAY, SINGLE DOOR |
| 105 | 8 WAY, DOUBLE DOOR |
| 106 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) 4sq.mm 2core |
| 107 | 6sq.mm 2core |
| 108 | 50sqmm 3 1/2 core |
| 109 | MV cable laying up to 25 sq.mm in ground with out sand and cover |
| 110 | Supply and fixing of LED post top lertern with die cast aluminum spigot. Spun AL powder coated to cove, AL clearacrylic and with LED Bulb with bulb holder, IP-65 (Make -Crompton/ Halonix/ Havels/ Bajaj) (Warranty -1 Year) |
| 111 | A.C Water Serving |
| 112 | Indoor Filter (Pair) |
| 113 | Gas Charging |
| 114 | Copper Pipe |
| 115 | 4sqmm 3core copper cable |
| 116 | Capacitor |
| 117 | Contactor |
| 118 | Drain Pipe |
| 119 | Supply of 7mtr long hot dip galavanized swaged type steel tublar pole with MS base plate (300x300x6) mm and having pole dimensions:- Bottom:- 114.3 OD X 5.40mm thickness X 4mtr long, Middle:- 88.9 OD X 4.85 mm thickness X 1.5mtr long, Top:- 76.1 OD X 3.25 mm thickness X 1.5mtr long. |
| 120 | Suplly of 50mm dia detachble single arm (1mtr long) bracket for tubular pole |
| 121 | Excavation of earth work for foundation to install pole including concreting of pole base and couping with supply of all concreting materials as per the following specification. Planting depth - 1.5Mtrs. Pole pit size- 0.6m x 0.6m x 1.5m cement concreting - 1:4:8 with 4cm HG metal size. And couping of standard size in to 0.4m x 0.4m x 0.5m with cement concreting (1:2:4) using 20mm B.H.G.C/B Chips this includes the cost of all concreting materials, labour and hire charges of all Tand P materials. The Pole is to be installed in proper alignment as per the direction of the engineering in charge. |
| 122 | Supplying of upto 63mm HDPE PVC Pipe |
| 123 | Supply of 8Mtr Long internally and extrenally hot dip galvanized octagonal pole made up of top dia 90mm & bottom dia 190mm and 3mm thick HT steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base plate size 300x300x20mm thick shall be welded (inside & outside) with pole shaft, 4nos M24X850mm long J Bolt along with Temp plate, 3 nos Nut & washer, including inbuild JB, contaning (SP MCB, Terminal Stud, Backlite sheet,SS hardware Etc.) (Make- Reputed Company). |
| 124 | Supply of 0.50mm dia Detachable Four arm round bracket for Octagonal Pole. |
| 125 | Construction of R.C.C foundation for errection of 8Mtr Octagonal Pole as specification, P.C.C of (1:3:6) with 40CM HGCB metal (0.60c0.60x0.10)M, R.C.C M-25 with 20mm black hard granite crushed broken stone chips (0.60x0.60x1.30)M, M.S rainforcement for R.C.C foundation with M.S rod, 12mm thick cement plaster in cement morter (1:6) over concrete work masonary complete in all respect including CC material labour & hire charges of all T&P materials. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender