Tender For Fire Fighting System Of Flatted Factory Inside Electronic Manufacturing Cluster (Emc)Park - Mouza-Harapur-Infovalley-Ii Bhubaneswar, Odisha
Tender Value
1.41 Crore
Estimated cost
Bid Submission
28 Oct 2026
2 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fire Fighting System Of Flatted Factory Inside Electronic Manufacturing Cluster (Emc)Park - Mouza-Harapur-Infovalley-Ii Bhubaneswar, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | (A) FIRE PUMPS |
| 2 | (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required :(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered with anti vibration pads. Make: Kirloskar/KSB/Lubi, Or equvilent. |
| 3 | 2280 lpm at 88 m Head (Main Hydrant Pump) |
| 4 | (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required :(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered with anti vibration pads. Make: Kirloskar/KSB/Lubi, Or equvilent. |
| 5 | 2280 lpm at 88 m Head (Main Sprinkler Pump) |
| 6 | (a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)(b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.Make: Kirloskar/KSB/Lubi, Or equvilent. |
| 7 | 2280 lpm at 88 m Head (Diesel Engine Standby Pump) |
| 8 | (a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Jockey Pump)(b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.Make: Kirloskar/KSB/Lubi, Or equvilent. |
| 9 | 180 lpm at 88 m Head (Jockey Pump for Hydrant & Sprinkler) |
| 10 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)Horizontal type, multistage, centrifugal, end suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mountedtype with Class-'F' insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 11 | 900 lpm at 35 m Head |
| 12 | Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : |
| 13 | Electrical Control Panel |
| 14 | Fabrication, Supplying, lnstallation, Testing and Commissioning of fire pump control panel of cubical construction, floor/wall mounted type, fabrication out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, having switchgear, metering instrument and accessories mounting and internalwiring, earth terminals, numbering ect. complete in all respect, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class lP 42 as required.INCOMER -1No. 63 Amps. TPN MCCB (100% lcs=lcu=25KA) having thermal magnetic release with adjustable setting. -0-500 volts voltmeter with slector switch and control fuses- 1 SET. -0-100 amps ammeter with CTs and slector switch- '1 SET. -Phase indicating LED type lamp with toggle switches. -lndication lamps LED Type for ON/OFF/TRIP status, control MCB. Busbar 40 Amps. TPN busbar of high conductivity slectrolytic quality alluminium alloy. OUTGOING FEEDER/ STARTER - 40 Amps. TPN MCCB (100% lcs=lcu=25KA) having thermal magnetic release with adjustable setting, with suitabte HP fully automatic star/delta slarter with overload protection, current sensing type single phase preventor complete wath all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off indication lamp etc -1set. (0-504) Ammeter with 3CTs, selector switch.-1set. |
| 15 | Supply and laying of following sizes of 1.1KV grade FRLS XLPE insulated and PVC sheathed aluminium conductor armoured stranded power cables conforming to lS 7098 Part-1 as ammended upto date and as per enclosed specification. Make - Polycab, KEI, Gloster |
| 16 | 3C X 70 sqmm xlpe Al. Armoured cable |
| 17 | 3C X 16 sqmm xlpe Al. Armoured cable |
| 18 | 3C X 10 sqmm xlpe Al. Armoured cable |
| 19 | (B) VALVES & FITTINGS (FOR FIRE PUMPS) |
| 20 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.Make: Newage/Zoloto/Audoco, Or equvilent. |
| 21 | 250 mm dia |
| 22 | Supplying, fixing, testing & commissioning of double flanged Sluice Valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 23 | 250 mm dia |
| 24 | 200 mm dia |
| 25 | 150 mm dia |
| 26 | 100 mm dia |
| 27 | 80 mm dia |
| 28 | 65 mm dia |
| 29 | Providing, installation, testing and commissioning of Non-return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 30 | 200 mm dia |
| 31 | 150 mm dia |
| 32 | 100 mm dia |
| 33 | 65 mm dia |
| 34 | Providing & fixing heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required.Make: Newage/Zoloto/Audoco, Or equvilent. |
| 35 | 150 mm dia |
| 36 | 100 mm dia |
| 37 | 80 mm dia |
| 38 | Providing & fixing Pressure Switch in following sizes M.S. pipe including connection etc as required.Make: Indfoss/Danfoss/Wika/Alpha or equvilent. |
| 39 | Pressure switch |
| 40 | Providing and fixing 0-21 kg Pressure Gauge of 100 mm dia including making necessary hole accessories etc.Make: H-Guru/Fiebig/Wika or equvilent. |
| 41 | 100 mm Dia |
| 42 | Providing and fixing Ball Valve P.N. 25 hot forged sand blasted nickel plated body and cap sealed with loctite chrome plated brass valve carbon steel handle PVC coated complete in all respects. (screw type)Make: Newage/Zoloto/Audoco, Or equvilent. |
| 43 | 25 mm Dia |
| 44 | Providing, fixing, testing & commissioning of Installation Control Valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required:Make:HD/Tyco or equvilent. |
| 45 | 150 mm dia |
| 46 | Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 47 | 150 mm dia |
| 48 | 100 mm dia |
| 49 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :Make: Tata/Jindal Hisar/SAIL, Or equvilent. |
| 50 | 250 mm dia |
| 51 | 200 mm dia |
| 52 | 100 mm dia |
| 53 | 80 mm dia |
| 54 | (C ) MS PIPES (FOR AUTOMATIC SPRINKLER SYSTEM) |
| 55 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :Make: Tata/Jindal Hisar/SAIL, Or equvilent. |
| 56 | 150 mm dia |
| 57 | 100 mm dia |
| 58 | 80 mm dia |
| 59 | 65 mm dia |
| 60 | 50 mm dia |
| 61 | 40 mm dia |
| 62 | 32 mm dia |
| 63 | 25 mm dia |
| 64 | (D) ALLIED ACCESSORIES FOR AUTOMATIC SPRINKLER SYSTEM |
| 65 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type Sprinklers of rating 68 °C with required accessories :Make: Viking/HD/Tyco/Newage Or equvilent. |
| 66 | Upright Sprinkler |
| 67 | Pendent Sprinkler |
| 68 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete in all respect.Make:Viking/HD/Tyco/Newage Or equvilent. |
| 69 | 1200 mm long |
| 70 | Supplying, Installation, Testing and Commissioning of Flow Switch in M.S. pipe line including connection etc. as required.Make: Honeywell/system sensor/jainson or equvilent. |
| 71 | 150 mm dia |
| 72 | Providing and fixing inspectors test assembly complete with 25 mm test valve, sight glass sectional drain valve, union etc complete in all respect.Make: Honeywell/Newage/jainson or equvilent. |
| 73 | 25mm dia |
| 74 | Providing and fixing Ball Valve P.N. 25 hot forged sand blasted nickel plated body and cap sealed with loctite chrome plated brass valve carbon steel handle PVC coated complete in all respects. (screw type)Make: Newage/Zoloto/Audoco, Or equvilent. |
| 75 | 25mm Dia |
| 76 | Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 77 | 150 mm dia |
| 78 | Providing and fixing 0-21 kg Pressure Gauge of 100 mm dia including making necessary hole accessories etc.Make: H-Guru/Fiebig/Wika or equvilent. |
| 79 | 100 mm Dia |
| 80 | (E ) MS PIPES FOR INTERNAL HYDRANT SYSTEM |
| 81 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :Make: Tata/Jindal Hisar/SAIL, Or equvilent. |
| 82 | 150 mm dia |
| 83 | 100 mm dia |
| 84 | 80 mm dia |
| 85 | 50 mm dia |
| 86 | 25 mm dia |
| 87 | (F) ACCESSORIES FOR INTERNAL HYDRANT SYSTEM |
| 88 | Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 89 | 150 mm dia |
| 90 | 100 mm dia |
| 91 | Providing, installation, testing and commissioning of Non-return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required :Make: Newage/Zoloto/Audoco, Or equvilent. |
| 92 | 150 mm dia |
| 93 | Providing and fixing Ball Valve P.N. 25 hot forged sand blasted nickel plated body and cap sealed with loctite chrome plated brass valve carbon steel handle PVC coated complete in all respects. (screw type)Make: Newage/Zoloto/Audoco, Or equvilent. |
| 94 | 25mm Dia |
| 95 | Providing and fixing 0-21 kg Pressure Gauge of 100 mm dia including making necessary hole accessories etc.Make: H-Guru/Fiebig/Wika or equvilent. |
| 96 | 100 mm Dia |
| 97 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Make: Newage/Safex/Minimax/Omex Or equvilent |
| 98 | Single headed Stainless Steel (Landing Valve) |
| 99 | Supplying and fixing 63 mm dia, 15 m long RRL Hose Pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Make: Newage/Safex/Minimax/Omex Or equvilent |
| 100 | Stainless Steel (Grade 304) |
| 101 | Supplying and fixing First-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585.(b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall.(d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.Make: Newage/Safex/Minimax/Omex Or equvilent |
| 102 | 30 m length |
| 103 | Supplying & fixing 63 mm dia gun metal short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Make: Newage/Safex/Minimax/Omex Or equvilent |
| 104 | Stainless Steel (Grade 304) |
| 105 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :Make: Newage/Safex/Minimax/Omex Or equvilent |
| 106 | 4 way - 150 mm dia M.S. Pipe |
| 107 | Providing & Fixing Fire Man's Axe |
| 108 | Fire Man's Axe |
| 109 | Providing and fixing internal Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 2100 mm high x 900 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “ Hose Cabinet” to be painted on the door.Make: Newage/Safex/Minimax/Omex Or equvilent |
| 110 | Fire Hose Cabinet Door - 2100mm (H) x 900mm (W) |
| 111 | Supplying and fixing Air Vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 112 | 250 mm dia |
| 113 | (G) MS PIPES (FOR EXTERNAL HYDRANT SYSTEM) |
| 114 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.Make: Tata/Jindal Hisar/SAIL, or equvilent. |
| 115 | 150 mm Dia |
| 116 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :Make: Tata/Jindal Hisar/SAIL, Or equvilent. |
| 117 | 150 mm dia |
| 118 | 80 mm Dia |
| 119 | (H) ACCESSORIES FOR EXTERNAL HYDRANT SYSTEM |
| 120 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Make: Newage/Safex/Minimax/Omex Or equvilent |
| 121 | Single headed Stainless Steel (Landing Valve) |
| 122 | Providing and fixing stainless steel Fire Hose Cabinet Box (750mm x 600 mm x 250 mm) out door type suitable for accommodating yard hydrant made of 1.5mm thick stainless steel sheet of having central opening glazed door including necessary locking arrangements, powder coating inside & outside of Postal Red colour. (The cabinet shall be floor/wall mounted). The words “Hose Cabinet” to be painted on the box.Make: Newage/Safex/Minimax/Omex Or equvilent |
| 123 | 750x600x250mm |
| 124 | Supplying and fixing 63 mm dia, 15 m long RRL Hose Pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Make: Newage/Safex/Minimax/Omex Or equvilent |
| 125 | Stainless Steel (Grade 304) |
| 126 | Supplying & fixing 63 mm dia gun metal short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Make: Newage/Safex/Minimax/Omex Or equvilent |
| 127 | Stainless Steel (Grade 304) |
| 128 | (I) FIRE EXTINGUISHERS |
| 129 | Providing and fixing Carbon-di-oxide Fire Extinguisher consisting of welded M.S cylindrical body,squeeze lever discharge valve fitted with internal discharge tube, ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge with CO2 gas conforming to IS : 307-1996..Make:Omex/Safex/Minimax, Or equvilent |
| 130 | 4.5 kg capacity Cylinder |
| 131 | Providing and fixing ABC stored pressure dry chemical powder (mono ammonium phosphate) Fire Extinguisher IS : 15683 latest revision manufacturer and of CRCA sheet in welded construction, finish with High quality epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases).Make: Omex/Safex/Minimax, Or equvilent |
| 132 | Capacity 6 Kg (IS : 15683 : 2006) |
| 133 | Capacity 9 Kg (IS : 15683 : 2006) |
| 134 | Providing, fixing, testing & commissioning Mechanical Foam type (ISI marked) Fire Extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 finished externally with red enamel paint and fixed to wall with brackets complete with internal charger.Maake: Omex/Safex/Minimax, Or equvilent |
| 135 | 45 Ltr |
| 136 | (J) FIRE ALARM AND PA |
| 137 | Supplying installation testing and commissioning of Networkable Microprocessor based intelligent Addressable 2-loop main fire alarm panel. Addressability if intelligent panel shall be soft addressed so as to consume minimum time of addressing the system with detectors and devices. The panel shall have a redundant CPU running parallel to the primary CPU. The Intelligent panel shall be able to give pin point location of all fire/fault conditions. All the intelligent Detectors as applicable for various areas based on application and design considerations shall be sitting on Loop along with Loop-powered alarm Devices; MCPs and input/output modules. The panel shall have in built rectifier, loop cards , provision for external, LCD unit to indicate fire/fault signal with address 240 volt AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hrs normal working and then the capable of operating the system for 2 hours during an emergency conditions as required. with necessary software etc all complete as per specification & direction of EIC. (Make: Honeywell/Eaton/Glyptic Or equvilent ) |
| 138 | Supplying installation testing and commissioning of Addressable multi criteria detector sensor with status indicator, base and accessories for all floors etc. as per direction of Engineer-in-charge. (Make: Honeywell/Eaton/Glyptic Or equvilent ) |
| 139 | Supplying installation testing and commissioning of Addressable manual call point soft addressable type with in built fault isolator as per NFPA style 7 wiring etc all complete as per specification & direction of EIC. (Make: Honeywell/Eaton/Glyptic Or equvilent ) |
| 140 | Supplying, installing, testing and commissioning of addressiable loop power Hooter (Sound output of minimum 90db) Cum Strobe (strength of light led) complete witrh inbuilt isolator as per requirement etc all complete as per specification & direction of EIC.(Make: Honeywell/Eaton/Glyptic Or equvilent ) |
| 141 | Supply, Installation, Testing & Commissioning of Output/Input Relay Module (UL approved) for all floors etc all complete as per specification & direction of EIC(Make: Honeywell/Eaton/Glyptic Or equvilent ) |
| 142 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. all complete as per specification & direction of Engineer-in-charge.Make- POLYCAB/Havells / RR KABLE |
| 143 | Supplying and Installation in position the following type of sign boards made out of 3mm thick \\"Opaque\\" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.Lift, Stailcase, Floor etc. |
| 144 | Supplying, & Fixing of Fire Escape Route Floor plan Photoluminesent Vinyle sheet pasted on 4mm thick ACP Sheet covered with 4mm thick toughend glass to fixed on wall of sizemade of 800mm x 4500mm the design and drawing approved by the Engineer-In-Charge with necessary studs complete in all respect. |
| 145 | PA SYSTEM : |
| 146 | Supplying, installation, testing & commissioning of 6W box wall-mounted speakers complete as required.(Make: Honeywell/Bosch/Glyptic Or equvilent ) |
| 147 | Supply, Installation, Testing & Commissioning of 250W Class-D, Public Address System compatible for Fire Alarm Panels - for the purpose of making announcements, conveying information and messages needed in a particular location or zone - The consoles comes in a range begins from not less than 6 Zone. This console is user friendly system with option of zone selection for individual zone announcement and common announcement through goose neck/handheld microphones, It should have functioned like audio playing, zone control fault monitoring, log recording, volume control and amplifier switch over etc all complete as per specification & direction of EIC.Warranty: 3 year-warranty from OEM shall be produced.(Make: Honeywell/Bosch/Glyptic Or equvilent ) |
| 148 | Supply,installation,testing and commissioning of 9U Rack Standard for Racks configuration will be welded frame integrated with side panel and vented top cover with fan mounting provision, associated with Front Glass Door with Lock & Key and Back Metal Door with Lock & Key and freestanding on floor with 4 No casters wheels with 2 No with brakes and 2 No without brakes Available in 6RU ~32RU Variants with 600 Depth configurations and 600 Width configurations Floor Mount Racks - FM Series.Make : Netrack/APW/RITTAL/VALRACK |
| 149 | Supply,installation,testing and commissioning of 2core x 1.5sq.mm FRLS cable with its required accessories like saddle,screw,grip etc fixed on the surface of the building structure.Make- POLYCAB/KEI/ RR KABLE/Finolex/Bolton |
| 150 | (K) UNDERGROUND RESERVOIR AND FIRE PUMP HOUSE |
| 151 | Design,Drawing,Construction,testing & commisioning of follwing capacity RCC clear water underground storage reservoir with provision for filling,delivery,over flow & wash out arrangement with puddle flange etc all complete as per specification and direction of EIC |
| 152 | 2.5 lakh ltr (1.5 lakh Ltr For Fire fighting +1 lakh ltr for Domestic) |
| 153 | Design,Drawing,Construction,testing & commisioning of Sunken pump house all complete as per specification and direction of EIC |
| 154 | Sunken pump House Pinth Area Size |
| 155 | N.B.:- GST as applicable will be paid extra. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender