Tender For O/M Of Msps/Ips And Sewer Line At Expressway ( Two Year Annual Repairing Of Non-Clog Pump, Automatic Starter At Ips-5, Sector-154 And Ips-6, Sector-166) Noida
Tender Value
61.02 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
1.44 Lakhs
Bank guarantee accepted
Document Fee
2832
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for O/M Of Msps/Ips And Sewer Line At Expressway ( Two Year Annual Repairing Of Non-Clog Pump, Automatic Starter At Ips-5, Sector-154 And Ips-6, Sector-166) Noida
BOQ
| Sl. No. | Item Description |
| 1 | Repairing and renovation of 90 HP Kishor make non-clog submersible pump set as per following - |
| 2 | Winding themostat 140 +/- 5% ON/Off Auto cut |
| 3 | Upper mechanical seal |
| 4 | Lower mechanical seal |
| 5 | Cable Protector |
| 6 | S/F \\"O\\" ring set |
| 7 | S/F Oil |
| 8 | S/F Terminal Block |
| 9 | S/F Spring Washers |
| 10 | S/F CIR Clip |
| 11 | Adjustmet Screw |
| 12 | Top Cover |
| 13 | Power Cable 2*(4*25)+1*(4*1.5) |
| 14 | Bottom Plate |
| 15 | D.I. Impeller |
| 16 | Motor Dismentling and Assembling including labour Charges |
| 17 | Repairing of Fully Automatic Starter 100 HP as per following based on Approved Analysis: a) S/I of MNX 225 Amp. Contactor L&T Make |
| 18 | S/I of 250 Amp. MCCB L&T Make |
| 19 | S/F of Timer L&T Make |
| 20 | S/I of VPD Make Soft Hard |
| 21 | S/I of MPD Make Soft Hard |
| 22 | WLC/Seal Monitor (Make Pump Care/Kishor) |
| 23 | S/I of Control Transformer Make Electra Care/Pioneer |
| 24 | S/I Winding Temp. Relay Minilec Make |
| 25 | Auto Transformer suitable for 100 HP induction motor |
| 26 | Supply and fixing of recess / surface mounting square 24 to 32 Watt LED down lighter having powder coated die cast aluminium housing with extended heat sink, diffuser / Reflector and driver set complete in all respects. |
| 27 | Supply and Fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 60 to 72 watt. Confirming to IP 66 protection complete in all respects. |
| 28 | Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.120 sq. mm 3 core. |
| 29 | S/L of aluminium conductor PVC insulated armoured served, sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by Engineer-Incharge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 8.01) 120 sqmm 3½ core |
| 30 | 400 sqmm 3½ core |
| 31 | S/F of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. a) 120 Sqmm |
| 32 | 185 Sqmm |
| 33 | 240 Sqmm |
| 34 | 400 Sqmm |
| 35 | S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL make complete in all respects as per direction of E/I. |
| 36 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 120 sq.mm |
| 37 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 120 sq.mm |
| 38 | Supply and burying of 600 x 600 x 6mm GI plate vertically for earthing with its top at least 3 m below ground level complete with 20mm GI pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia GI pipe up to switch board (from appron to switch board the cost of GI pipe and GI wire will be extra) 30cm. square C.I. frame with hinged cover masonary housing alternate layers of charcoal/coak and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing. |
| 39 | S/F overhead line with ACSR conductor RABBIT/RECON category one poles/service bracket i/c bindng etc. complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender