Tender For Plastering Work Lot 01 From Mohd Yunuss House On Fish Market Road In Village Basta In Block Jalilpur On Bohra Bundrikala To Aarak Road.
Tender Value
47.17 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
4 days left
EMD
94359
Bank guarantee accepted
Document Fee
886
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijnor → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Plastering Work Lot 01 From Mohd Yunuss House On Fish Market Road In Village Basta In Block Jalilpur On Bohra Bundrikala To Aarak Road.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 30 m as per Technical Specification Clause-301.5. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per technical Specification Clause-405 |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause-405. G-3 |
| 5 | Brick soling with straight over burnt brick laid on edge and dry and edging on both sides incluiding preparation of sub grade to prescribed camber and incluiding supply of brick filling joints with local earth over the entire surface and incluiding labour and T&P etc. required for proper completion of work. |
| 6 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per Technical Specification Clause-502 |
| 7 | Providing and applying tack coat with Bitumen(VG-10) using Bituman distributor at the rate of 0.275 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause-503. |
| 8 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by(ex.cost of) seal coat of Type- C as per Technical Specification Clause 508. |
| 9 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type- C as per Technical Specification Clause 510 |
| 10 | Providing and laying of Hot applied thermoplastic compound 2.50 mm thick including reflactorising glass beads @ 250 gm per Sqm area. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled uniform and free from streaks and holes. |
| 11 | Providing and fixing of retro reflective signs a corroision resistence 4 mm thick aluminum composite panel face to be fully converted with high intensity prismatic sheeting type 4 as per IRC 67-2010 retro reflective sheeting with MS angle frame 35x3.(Caution Boards on main roads prior to intersections) |
| 12 | Supply And Fixing of Ordinary Kilo Meter Stone |
| 13 | Supply And Fixing of Sub Kilo Meter Stone ( 200 M) |
| 14 | Laying of N.P.3 350 MM Dia Hume Pipe |
| 15 | S/F Sign Board As Per Detail Drawing & design. |
| 16 | Add 18% for GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender