Tender For Repair/ Maintenance Of Damaged/ Unsv Water Supply Main Pipe Lines Along With Connected Works At Morabadi & Repair / Replacement Of Kitchen Cabinets, Other Wooden Cabinets, Att , Broken Floors, Sanitary Fitting, Toilet Walls And Floor, Dama
Tender Value
32 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
8 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Damaged/ Unsv Water Supply Main Pipe Lines Along With Connected Works At Morabadi & Repair / Replacement Of Kitchen Cabinets, Other Wooden Cabinets, Att , Broken Floors, Sanitary Fitting, Toilet Walls And Floor, Damaged Chajjas, Facia At Namkum And Painting Of Perimeter Wall, Compound Wall Etc At Khojatoli Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 2 | M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. |
| 4 | 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement. |
| 5 | Supply only liquid water proofing compound as per manufacture instruction. |
| 6 | M&L finishing walls on Complete removal of old prepared surfaces with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. Note including scafolding up to G+3 story bldg, etc complete.complete |
| 7 | Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 8 | M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as directed |
| 9 | M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion complete all as directed |
| 10 | M&L finishing walls on newly prepared surfaces with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note including scafolding up to G+3 story bldg, etc complete. |
| 11 | Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified. |
| 12 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 13 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 14 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 15 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 16 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed. |
| 17 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) |
| 18 | Description all as per Ser item No 17 above but exc1.5 Sqm but n.exc. 4 Sqm. |
| 19 | Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete. |
| 20 | Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete. |
| 21 | S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 23 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 24 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long. |
| 25 | S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 26 | S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 27 | S&F 100 mm Stainless steel butt hinges, with stainless steel hinge pin,complete all as specified and directed |
| 28 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 29 | S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. |
| 30 | Demolition of (unreinforced)Cement concrete in ground floor and paving n exc 15cm thickness(below and above ground level)all as spd and directed |
| 31 | Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed. |
| 32 | 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
| 34 | M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, edgeless , area of each tile exc 600 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 35 | Description all as per Ser item No 34 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 36 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 37 | Description all as per Ser item No 36 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 38 | M&L for 450x350x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set & jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 39 | Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed. |
| 40 | Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed. |
| 41 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 42 | Rotational moulded polythene water storage tanks, triple layered (Cylindrical vertical with closed top) of capacity 500 lit, hoisted and fixed in position as in repair complete all as specified. |
| 43 | Rotational moulded polythene water storage tanks, triple layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified. |
| 44 | Cleaning and removing all scale and dirt etc by using bleaching powder from water tank and from mouth of circulating pipe,etc Capacity of tank n exc 250 litrres |
| 45 | Description all as per Ser item No 44 above but Capacity of tank exc 250 litres & n exc 500 litres |
| 46 | Description all as per Ser item No 44 above but Capacity of tank exc 500 litres & n exc 1000 litres |
| 47 | Description all as per Ser item No 44 above but Capacity of tank exc 1000 litres & n exc 2000 litres |
| 48 | Description all as per Ser item No 44 above but Capacity of tank exc 2000 litres & n exc 5000 litres |
| 49 | S&F in repair PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge. |
| 50 | S&F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minimum weight 210 gms) complete as directed by Engr-in-charge. |
| 51 | S & F Viterous china wash basin, white, flat back, of size 550x400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm. |
| 52 | S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 53 | S & F Brass chromium plated tubular towel rail, 20mm dia, D Type, and 600mm long with brackets fixed complete with brass chromium plated screws. |
| 54 | S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed by Engr.in.charge. |
| 55 | S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed |
| 56 | S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 57 | Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed. |
| 58 | S&F in repairs shower rose brass chromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6\\" long made to shape comptete. |
| 59 | Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 60 | S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 61 | 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality |
| 62 | S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. |
| 63 | S & F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified |
| 64 | Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. |
| 65 | Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately) |
| 66 | 25mm thick PCC 1:2:4 type B0 using12.5 mm graded stone aggregate as in sunken floor complete as specified and directed. |
| 67 | M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately |
| 68 | M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely |
| 69 | M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed |
| 70 | M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed. |
| 71 | M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed. |
| 72 | Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed. |
| 73 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia |
| 74 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia |
| 75 | S&F PVC (SWR) bends/shoes any radius of 110mm dia |
| 76 | S&F PVC (SWR) bends any radius provided with access door of 110mm dia |
| 77 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia |
| 78 | S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door |
| 79 | M&L PVC(SWR) Tee of radius 110mm dia. |
| 80 | S & F PVC(SWR) vent cowl of 110mm dia. |
| 81 | S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door |
| 82 | S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified |
| 83 | M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp. |
| 84 | M&L PVC (SWR) bend of radius 75mm dia. |
| 85 | S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed. |
| 86 | S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed. |
| 87 | S&F in repair PTMT grating doom 100mm dia. |
| 88 | Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm. |
| 89 | M & L PCC 1:3:6 type C2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in |
| 90 | S & F ultra Plus PE, DWC ( double wall corrugated) pipe confirming IS 16098 part II 2013, pertaining structured wall plastic pinning system for non pressure drainage and sewerage 150mm bore pipe and fitting with non smooth surface, type B complete all as specified and directed. |
| 91 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 92 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 93 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 94 | M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc. |
| 95 | Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or sloping) rough finished complete. |
| 96 | M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 97 | Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc |
| 98 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1 : 4. |
| 99 | M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement. |
| 100 | S & F in repair 25 mm thick factory pressed HDHMR board over both side Semi Acrylic sheet including 2mm thick PVC edge bending tape with hot glue by edge bending machine etc. fixed with auto closing sring loaded hinges (Hydraulic type) etc. or sliding with track arrengement as directed including necessary accessories like stainless steel handle, magnetic catch etc. and steel basket of required size mounded on suitaible chennel with ball bearing to moving of basket smoothly including all necessary fitting and fixture complete all as specified and directed by GE. Notes : All accessories and fittings/ fixture paid separately. |
| 101 | S&F Auto closing Veosys hinges Base 11.5 (Crank 0) with Mounting Plate (D 0 mm) 14 to 22mm thick doors opening angle 105 degree (Make - Hettich or equivalent in Haffle and Godrej as approved by GE |
| 102 | S&F Furniture Handle \\"Salona\\" of Pro-decor series. (Make - Hettich or equivalent in Haffle, Doorset and Godrej as approved by GE) |
| 103 | S & F in repair 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 104 | M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:4 |
| 105 | M&L for preparation of old plastered surfaces and applying two coats of oil bound distemper over a coat of wall care putty including complete removal of existing treatment. |
| 106 | M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately) |
| 107 | Description all as per Ser item No 106 above herein before but exposed area exc 0.16 Sqm but not exc 2.0 Sqm |
| 108 | M&L for expanded metal n.exc 4Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 109 | M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 110 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 all as specified and directed. |
| 111 | Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 112 | M/L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two coats on fair faces of brick work , finished even and fair without using extra cement with WPC all as specified and directed. |
| 113 | M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete a directed. |
| 114 | Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed. |
| 115 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed. |
| 116 | Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 117 | S&F powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 118 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples |
| 119 | Supply & fix 4mm thick , figured glass,pin head type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows/aluminium frmae in square n.exc. 0.50sqm each pane |
| 120 | S&F in repair 20mm Gate valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm/ 92gms) as per specidied and directed |
| 121 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. all as specified and directed. |
| 122 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 |
| 123 | Taking down eaves gutter and rain water pipes (any size or pattern ) including all fittings, heads shoes bend swan necks etc at any position ( measure overall as fixed along the centre line over fitting and accessories ) all as specified and directed. |
| 124 | S& F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring joints fixed to floors all as specified. |
| 125 | M&L 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, inwall surface fixed in repair all as specified and directed. |
| 126 | M&L 75mm bore PVC (SWR) bends any radius fixed in floor in repair |
| 127 | M&L 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fixed in repair |
| 128 | M & L preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of cement based paint white or tinted over a coat of alkali resistant primer complete as specified and directed. |
| 129 | M & L complete removal of existing treatment on wall and applying one coat of Cement base paint all as specified and directed. |
| 130 | M&Lcomplete removal of existing treatment on wall and applying two coat of cement paint on Complete removal of existing old surfaces on wall , etc complete all as specified and directed. |
| 131 | M&L in repair type C1 1:3:6(20mm graded aggregate) precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as spd and direcetd |
| 132 | M&L for Type B0 1:2:4 (12.5mm graded aggregate) precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould (Pre cast frame shall be measured separately and paid) set in cement mortar 1:4 all as spd and direceted. |
| 133 | Cutting the existing road of any kind straight by manual, depth and width not less than 30 cm for pipes up to 350 mm dia and 60 cm for pipes from 150 mm to 100 mm dia and 75 cm for pipes and filling back with excavated soil up to 75 % road portion and 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed. |
| 134 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundation mass concrete and filling including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed at site. |
| 135 | Supply and fixing in repairs of CI/DI/GI mechanical coupling / mechanical joint / D-joint, heavy duty type, ISI marked, split type with long collar, complete with suitable rubber rings, bolts, nuts, washers and all jointing materials, suitable for MS/CI/DI/GI/PVC pipes of the following sizes, for attending and repairing all type of leakages, complete all as specified and as directed by Engineer-in-Charge.Notes:- (a) Excavation and Earth work shall be measured and paid separately. |
| 136 | 150 mm Dia |
| 137 | 100 mm Dia Please Enable Macros to View BoQ information |
| 138 | 100 mm Dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender