Tender For Repair / Maintenance Of Steel Furniture Of Certain Unit At Different Location Under Ge Jorhat.
Tender Value
32 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Steel Furniture Of Certain Unit At Different Location Under Ge Jorhat.
BOQ
| Sl. No. | Item Description |
| 1 | NOTE:-(i) The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.(ii) It is highlighted that the certain condition of General Condition of Contracts (IAFW-2249) has been modified as per direction of MoD i.e. inclusssion of Performance Security, deletion of Risk & Cost Provisions and increase in defect liability period all as per tender documents. The tenderers should keep in mind while quoting their offer. (iii) (Applicable for all items/parts):- The bidders/contractors are advised to refer Notes on BOQ/SCH'A' before entry/quoting the rates. |
| 2 | Material and labour for taking down unserviceable parts from Large Steel Almirah with Shelves (FD-1031), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 3 | Old Unserviciable Legs |
| 4 | Old Unserviciable Shelf |
| 5 | Old Unserviciable Lock |
| 6 | Old Unserviciable Locking device set |
| 7 | Old Unserviciable CP Handle |
| 8 | Old Unserviciable MS Shutter |
| 9 | Material and labour for taking down unserviceable parts from Almirah Medium/ Small steel (FD-1032), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 10 | Old Unserviciable Legs |
| 11 | Old Unserviciable Shelf |
| 12 | Old Unserviciable Lock |
| 13 | Old Unserviciable Locking device set |
| 14 | Old Unserviciable CP Handle |
| 15 | Old Unserviciable MS Shutter |
| 16 | Material and labour for taking down unserviceable parts from Bed Hard for JCO Steel (GE/J/F/01), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 17 | Old Unserviciable Plywood Top |
| 18 | Old Unserviciable Head Rest Board |
| 19 | Old Unserviciable Foot Board |
| 20 | Old Unserviciable Long Rail |
| 21 | Old Unserviciable Short Rail |
| 22 | Old Unserviciable PVC hard shoe |
| 23 | Material and labour for taking down unserviceable parts from Bed Hard Offr Steel (FD/E6/MAP/08(R), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 24 | Old Unserviciable Plywood Top |
| 25 | Old Unserviciable Head Rest Board |
| 26 | Old Unserviciable Foot Board |
| 27 | Old Unserviciable Long Rail |
| 28 | Old Unserviciable Short Rail |
| 29 | Old Unserviciable PVC hard shoe |
| 30 | Material and labour for taking down unserviceable parts from Book case steel (FD-1028), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 31 | Old Unserviciable Pane Glass 3mm/4mm thick |
| 32 | Old Unserviciable CP Handle |
| 33 | Old Unserviciable125mm thick MS Channel |
| 34 | Old Unserviciable Brass Lock |
| 35 | Material and labour for taking down unserviceable parts from Charpoy GI Pipe 32mm with Ply Top (GE/J/F/03), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 36 | Old Unserviciable Plywood Top & including nutt, bolt, washers and necessary welding, drilling on each rails/Stiffener |
| 37 | Old Unserviciable 32mm dia medium grade long rail including cutting, threading for GI Charpoy |
| 38 | Old Unserviciable short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from Long Rails including cutting & threading |
| 39 | Old Unserviciable Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Short Rails including cutting, threading |
| 40 | Old Unserviciable 32mm dia medium grade GI elbow three ways |
| 41 | Old Unserviciable 32mm dia medium grade GI Check Nut three ways |
| 42 | Material and labour for taking down unserviceable parts from Chair Executive, High Back (TP), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 43 | Old Unserviciable Chrome free cylinder tube |
| 44 | Old Unserviciable Arms rest |
| 45 | Old Unserviciable Caster wheel |
| 46 | Old Unserviciable CP Base with caster wheel |
| 47 | Old Unserviciable Seat or Back of Chair Revolving Executive |
| 48 | Material and labour for taking down unserviceable parts from Chair School with hand board (FD/E6/MAP/05), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 49 | Old Unserviciable 18mm Thick plywood both side fixed 1mm Thick sunmica & PVC edging fixed around of hand board. |
| 50 | Old Unserviciable PVC Sheet & Back |
| 51 | Old Unserviciable hard PVC shoe |
| 52 | Material and labour for taking down unserviceable parts from Chair verandah (FD-256), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 53 | Old Unserviciable Legs |
| 54 | Old Unserviciable Re-canning of Sheet & Back fram |
| 55 | Old Unserviciable hard PVC shoe |
| 56 | Material and labour for taking down unserviceable parts from Chair cane bottom tubular office with arms (CBA) (FD-75(M), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 57 | Old Unserviciable Cane plastic 2mm wide & border 4mm from seat alongwith frame |
| 58 | Old Unserviciable Cane plastic 2mm wide & border 4mm from back alongwith frame |
| 59 | Material and labour for taking down unserviceable parts from Chair Writing (FD/E6/MAP/12), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 60 | Old Unserviciable Seat, cushion, covered cloth with PVC beading |
| 61 | Old Unserviciable Back, cushion, covered cloth with PVC beading |
| 62 | Old Unserviciable Hand rest |
| 63 | Material and labour for taking down unserviceable parts from Charpoy with Hard top for JCO/ORs (FD/MAP-II/01), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 64 | Old Unserviciable Plywood top |
| 65 | Old Unserviciable Long Rail |
| 66 | Old Unserviciable Short Rail |
| 67 | Old Unserviciable Legs |
| 68 | Old Unserviciable Stiffner |
| 69 | Old Unserviciable PVC hard shoe |
| 70 | Material and labour for taking down unserviceable parts from Locker steel (FD-1029), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 71 | Old Unserviciable Legs |
| 72 | Old Unserviciable Shelf |
| 73 | Old Unserviciable Hasp & Staple |
| 74 | Old Unserviciable 20mm dia CP Steel conduit pipe |
| 75 | Old Unserviciable CP Handle |
| 76 | Old Unserviciable MS Shutter |
| 77 | Material and labour for taking down unserviceable parts from Table (900X900X760mm) (steel) (FD-1009), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 78 | Old Unserviciable 19mm Thick prelaminated Particle Board Top with standard PVC edging alround |
| 79 | Old Unserviciable leg |
| 80 | Old Unserviciable Long & Short Rail |
| 81 | Old Unserviciable PVC hard shoe |
| 82 | Material and labour for taking down unserviceable parts from Table bed Side (FD/E6/MAP/15(R), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 83 | Old Unserviciable 19mm Thick prelaminated Particle Board Top with standard PVC edging alround |
| 84 | Old Unserviciable Sides |
| 85 | Old Unserviciable Large drawer shutter |
| 86 | Old Unserviciable Small drawer complete |
| 87 | Old Unserviciable CP Handle |
| 88 | U/S Rear Frame |
| 89 | Old Unserviciable Front Frame |
| 90 | Old Unserviciable PVC hard shoe |
| 91 | Material and labour for taking down unserviceable parts from Table cook steel (FD-1019), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 92 | Old Unserviciable Leg |
| 93 | Old Unserviciable Long Rail |
| 94 | Old Unserviciable Short Rail |
| 95 | Old Unserviciable Top/bottom Stiffner |
| 96 | Old Unserviciable PVC hard shoe |
| 97 | Material and labour for taking down unserviceable parts from Table Steel Office clk/ Typist (FD-1004), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 98 | Old Unserviciable 19mm Thick prelaminated Particle Board Top with standard PVC edging alround |
| 99 | Old Unserviciable Leg |
| 100 | Old Unserviciable Long Rail |
| 101 | Old Unserviciable Short Top/bottom Rail |
| 102 | Old Unserviciable Centre bottom Stiffner |
| 103 | Old Unserviciable Drawer |
| 104 | Old Unserviciable CP handle |
| 105 | Old Unserviciable PVC hard shoe |
| 106 | Material and labour for taking down unserviceable parts from Table Office officers steel (FD-1003), including necessary dismantling, denting, straightening and welding works, fabrication, supply and fixing of new replacement parts of approved material, size and specification as shown on drawings including cutting, fitting, alignment, fastening and making good complete all as specified and as directed. |
| 107 | Old Unserviciable 19mm Thick prelaminated Particle Board Top with standard PVC edging alround |
| 108 | Old Unserviciable Leg |
| 109 | Old Unserviciable Long Rail |
| 110 | Old Unserviciable Short Top/bottom Rail |
| 111 | Old Unserviciable Centre bottom Stiffner |
| 112 | Old Unserviciable Drawer |
| 113 | Old Unserviciable CP handle |
| 114 | Old Unserviciable PVC hard shoe |
| 115 | Material and labour for cleaning and preparing existing steel furniture by removing dirt, dust, stains, marks and loose/defective paint, including necessary denting, straightening, welding and minor repair works, filling dents, pinholes, cracks and small gaps with approved metal filler/putty, rubbing down and smoothening the surface by suitable emery/sand paper, including supply and application of two coats of approved synthetic enamel paint over suitable primer to obtain a smooth, uniform, high-gloss and lustrous finish, complete all as specified and as directed. |
| 116 | Almirah large steel (FD-1031) |
| 117 | Almirah small steel (FD-1032) |
| 118 | Bed Hard for JCO Steel (GE/J/F/01) |
| 119 | Book case (steel) (FD-1028) |
| 120 | Book shelf open (large) steel (FD-69M) |
| 121 | Book shelf open (Small) steel (FD-69M) |
| 122 | Cabinet Filing (FD-397) |
| 123 | Chair School with hand board (FD/E6/MAP/05) |
| 124 | Chair verandah (FD/MAP-II/06) |
| 125 | Locker bed side (steel) (FD-1029): |
| 126 | Table 3'x3' (steel) (FD-1009) |
| 127 | Table bed Side (FD/E6/MAP/15(R)) |
| 128 | Table cook (steel) (FD-297/FD-1019) |
| 129 | Table for Havs & ORs (steel) (FD-1007) |
| 130 | Table with drawer 3'x2' (steel) (FD-1008) |
| 131 | Table Office clerks (steel) (FD-1004) |
| 132 | Table Office officers (steel) (FD-1003) |
| 133 | Chair CB with arms (steel), FD-75 |
| 134 | Chair CB without arms (steel), FD-75 |
| 135 | Teapoy wooden, FD-278 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender