Tender For Repair/ Maintenance To Plumbing, Sanitary, Plastering Of Jcos/Or Md Accn At Sector ‘F Under Age B/R-I At Chandimandir Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
8 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Plumbing, Sanitary, Plastering Of Jcos/Or Md Accn At Sector ‘F Under Age B/R-I At Chandimandir Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed. |
| 2 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish outside MOD land all as specified & directed by Engineer-in-charge. |
| 3 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 4 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base. (as levelling coarse). complete all as specified and directed. |
| 5 | Glazed ceramic coloured printed tiles in vertical surfaces of size 300 x 450 x 7mm set and jointed in neat cement slurry over & incl 10mm thick rendering in CM 1:4 for receiving the tiles complete all as specified. |
| 6 | Non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:4, complete all as specified and directed. |
| 7 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 8 | All as per serial item No 7 above but as in skirting/dado over & incluidng 10 mm thick back coat plaster in CM 1:4 |
| 9 | Providing cement concrete type E-2, 1:5:10 using 40 mm graded stone aggregate, as in sunken filing, mass concrete etc., complete all as specified and as directed |
| 10 | Providing water proofing treatment to sunken floors as given below :-(a) Making fillet of size 50mm x 50mm at corner of slab and wall with PCC (1:2:4)(b) Cleaning the concrete surface by brushing & watering (c) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface . (d) Curing the sunken portion with water minimum for 48 hours by ponding. (e)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer on bottom surface of sunken and sides wall and as per manufacturers instructions. (f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound . (g) Ponding test will be carried out for 72 hours including temparory closing of spout (h) 40mm GI pipe spout of required length shall be provided at bottom / suitable location in sunken portion before doing any other work. this will include cutting and repair of required hole in brick work / RCC Note :- Floor area shall be measured to made payment . |
| 11 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 12 | Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 13 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, for partition walls, parapet in balcony and other similar work built in cement mortar 1:4 complete all as specified & directed. |
| 14 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 15 | HDPE double wall corrugated (DWC) pipes (ISI Marked) 150mm SN-8 class as per IS 16098 Part -II for non pressure underground drainage and sewage applications with speials including cost of special O rubber rings couplers etc, laid in trenches on concred bed to level / gradient, jointing with appropriate class fittings as per manufacturer's instructios including jointing accessories and fittings complete all as specified and directed. |
| 16 | Plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water trough and the like including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified & directed. |
| 17 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed. |
| 18 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 19 | Plain cement concrete, type C-2, 1:3:6, using 40mm graded crushed stone aggregate as in bed to drain pipe including packing haunching under against pipes and tested after the pipe are laid, complete all as specified and directed. |
| 20 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position like : RCC chajjas, colour stand etc not otherwise specifically provided complete all as specified and directed by engineer-in-charge. |
| 21 | Pre-cast reinforced cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in cover slab of shaft at roof level, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 22 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 23 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 24 | Dubbing out average 20mm thick on irregular faces/repair of demage area of walls,chajja and other similar work, exposed reinforced surfaces, upto 15m height, in CM 1:4 complete all as specified and directed. |
| 25 | 5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed. |
| 26 | Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified & directed. Note : WPC shall be measured and paid separately. |
| 27 | Liquid water proofing compound complete all as specified & directed. |
| 28 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 29 | Complete removal of existing wall treatement (finishes ) from plastered/ unplastered surface complete all as specified and directed. |
| 30 | Applying Wall care putty (average thickness 1-2mm) as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 31 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on wall (smart periodical) complete all as specified and directed. |
| 32 | Finishing walls with Acrylic Smooth exterior paint of required shade, on new plstered/ surface prepared under item No 63 (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade, on old plstered/ surface of walla prepared under item No 63 (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 34 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali resistant primer on ceiling surfacea complete all as specified and directed. |
| 35 | Preparation of old plastered ceiling surfaces and applying two coats of oil bound distemper over complete all as specified and directed. |
| 36 | HDPE floor trap 100mm dia with grating including jointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 fixed as in repair complete all as specified and directed. |
| 37 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 38 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, including seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 39 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed. |
| 40 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position and in repair complete in all respect, complete all as specified and directed. |
| 41 | PVC valve less syphonic action type 10 ltr flushing cistern, low level white in let ball valve, float and handle including brackets fixed in repair complete all as specified & directed. |
| 42 | Dismantling and refixing of Wash hand basin, vitreous china, flat back, with waste coupling, angle brackets, PVC waste pipe, complete all as specified and directed. |
| 43 | Dismantling and refixing PVC valve less syphonic action type 10 ltrs flushing cistern, low level, white with in let ball valve, float and handle, including brackets complete all as specified & directed. |
| 44 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 45 | Towel rail 600mm long of stainless steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 46 | Towel ring of Stainless steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 47 | Beveled edge Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs, complete all as specified and directed. |
| 48 | Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed. |
| 49 | Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connections 50mm bore ,complete all as specified and directed. |
| 51 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 52 | 20 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors including brass elbow, 'T' and all other necessary brass fitting like; 'T' bend & socket for fixing with GI tube/tap/mixer/stop cock, complete all as specified. |
| 53 | 25 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 54 | Supply and laying of 63 mm PVC pipe and fittings on walls/ceiling or laying in floors, for spout pipe, over flow and waste pipe complete all as specified. |
| 55 | Bib tap brass, fancy type, long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 56 | Taking down and re-fixing 15mm bore bib taps brass, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 57 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 58 | Wall mixer system with L bend including (provn of over head shower), cast copper alloy , chromium plated screwed down for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 59 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 60 | Taking down and refixing in repair wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed |
| 61 | Sheet glass shelf assembly consosting of 5.5mm thick sheet glass, corner shelf, 300mm radius with chromium plated bracket guard and railing, including fixing at site complete all as specified and directed. |
| 62 | Cast copper alloy, chromium plated, fancy type shower rose with swivel joints 125mm dia including fixing to CPVC pipe 15mm bore, fixed as in repair complete all as specified and directed. |
| 63 | 25mm bore Union, brass to connect iron to polyethylene and fixed, fixed as in repairs complete all as specified and directed. |
| 64 | 25mm Stop valves , cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes for unions and fixed , fixed as in repair complete all as specified and directed. |
| 65 | Cutting holes into or through brick wall built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superficial area n.exc 150 Sqm cm and depth of hole upto 30 CM as in repair complete all as specified & directed. |
| 66 | PVC (SWR) pipe 110mm bore of pressure rating 6kg/cm2 single socketed in any length with rubber ring joints, laid in trenches or in floors fixed and in repair complete all as specified and directed. |
| 67 | PVC (SWR) pipe 110mm bore of pressure rating 6kg/cm2 single socketed in any length with rubber ring joints fixed to walls fixed as in repair complete all as specified and directed. |
| 68 | 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, fixed as in repair complete all as specified and directed. |
| 69 | 110 mm bore PVC (SWR) bends of any radius complete, fixed as in repair complete all as specified and directed. |
| 70 | Plain cement mortar 1:3:6 (type C-2 using 20mm graded aggregate), 75mm thick as in Plinth protection , finishing cement concrete even and smooth without using extra cement, all as specified.Note : 10mm construction joint will be provided and panel should not be more than 3metre in length and joint filled with filler bitumen and sand in ratio (1:3) |
| 71 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple including dismantling of existing tank complete all as specified and directed. |
| 72 | Disconnecting existing tanks exc 500 and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified & directed by Engineer-in-charge. |
| 73 | Dismantling of boarding any description fixed in any position fixed with screws complete all as specified and directed |
| 74 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof), removal of debris complete all as specified & directed. |
| 75 | Dismantling of brick tiles laid or bedded in cement mortar complete all as specified & directed. |
| 76 | PCC 1:2:4 type B-1 (using 12.5mm graded crushed stone aggregate) as in roof padding, complete all as specified and directed. |
| 77 | Rendering 10mm thick finished even and fair on roof slab in cement mortar 1:4, using water proofing compound @ 3% by wright of cement complete all as specified and directed. Note :- (WPC will be measured and paid separately) |
| 78 | APP based polymeric membrane minimum weight 3.6 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric laid over and including priming surfaces with primer of same manufacturer @ 0.400 Liter/Sqm and laying APP membrane on Primed surface by torch application and sealing all joint and overlapping min 10cm, including of top surfaces of concrete complete all as specified and directed. |
| 79 | 40mm thick brick tiles on roof with & including 20mm thick cement mortar 1:4 and joints grouted and pointed complete mixed with crude oil @ 5% by weight of cement complete all as specified and directed. |
| 80 | Demolition of stone slabs and tiles of any description or tickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and directed |
| 81 | Machine cut Kota Stone Slab 20-22mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick rendering in CM 1:4 all as specified and directed. |
| 82 | Machine cut Kota Stone Slab 20-22mm thick over cement screed bed laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment over & incl 15mm thick CM 1:6 to match the shade of the slab including rubbing and ploshing complete all as specified and directed. |
| 83 | Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed. |
| 84 | Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified and directed. |
| 85 | Plate rack of stainless steel of size 600mmx 900mmx250mm with washer and plugs fixed in repair Complete all as specified and directed. |
| 86 | Taking down, chipping and removing the loose, split, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforcement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-barsurfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including steel scaffolding for carrying out the work upto height of 10 meter (Appx) complete all as specified and as directed. |
| 87 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 88 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 89 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification complete all as specified and directed. |
| 90 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling etc & fixing in the frame at site as per specification complete all as specified and directed. |
| 91 | Solid PVC board 20mm thick, with 2mm thick prelam PVC sheet on the front face & 2mm prelam PVC sheet on back with particle board core fixing in frame at site to cup board sgutter, shelves and kitchen cabinet complete all as specified and directed. MAKE: RAJSHREE, ECOCELL OR EQUIVALENT. |
| 92 | Continuous (piano) hinges, mild steel bright finish, width of flap when open 30mm, complete all as specified and directed. |
| 93 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 94 | PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed. |
| 95 | 100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed. |
| 96 | D' type, 100mm Extruded aluminium alloy handle fabricated type complete all as specified and directed. |
| 97 | 100 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 98 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 99 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 100 | Sainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 101 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples, including all necessary nut bolt, wooden bidding, FI , welding as per site requirement fixed in repair complete all as specified & directed. |
| 102 | 4mm thick figured (frosted) glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 103 | Hacking out old broken glass (any thickness size, quality or discription) from wooden frames or stone, concrete or brick surrounds, glazed with putty complete all as specified and directed. |
| 104 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 105 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, manhole cover, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0, as in repair all as specified and directed. |
| 106 | Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including cutting groov in wall & pack with CM 1:3 as required on site complete all as specified and directed. |
| 107 | Mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, as in repair complete all as specified and directed. |
| 108 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 109 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 110 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 111 | Taking down chowkhats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 112 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed. |
| 113 | Taking down and re-fixing of shutters of any description exc 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting complete all as specified & directed. |
| 114 | Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling with PCC 1:3:6 of hollow frame complete all as specified and directed. |
| 115 | Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling with PCC 1:3:6 of hollow frame complete all as specified and directed. |
| 116 | 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. |
| 117 | S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of farming plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of membres of shutters as specified in SSR Pt-1, section 8, clause 8.24- (a), supplied and fitted to chowkats complete all as specified and directed. |
| 118 | preparation of new surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 119 | 150mm Extruded aluminium alloy handle (D type) fabricated type, complete all as specified and directed. |
| 120 | 150 mm size aluminium anodized, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 121 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed. |
| 122 | 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 123 | 25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender