Tender For Repairs/Maint Of Certain Roads/Footpath, Road Furniture And Road Painting/Marking In Area Of Age B/R- I Under Ge (West) Lucknow.
Tender Value
1.49 Crore
Estimated cost
Bid Submission
12 Nov 2026
25 days left
EMD
2.24 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Maint Of Certain Roads/Footpath, Road Furniture And Road Painting/Marking In Area Of Age B/R- I Under Ge (West) Lucknow.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Revised BOQ | BOQ | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg /10 sqm complete all as specified and directed. |
| 2 | M & L for 30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compactad to required camber and gradient complete all as specified and directed. |
| 3 | M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed. |
| 4 | S & F cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions complete all as specified and directed. |
| 5 | S & F aluminium-alloy body Solar stud with following specification :-(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight.(b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.(c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud.(d) Working time 3 to 4 days successively after the battery is fully charged.(e) Charging time for full charge One full sunny day.(f) Working temperature : 10 to 75 Degree Celcius.(g) Flash rate : 60 to 70 times per minute normally.(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving.(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx.(k) Solar stud should be free of maintenance and operational in all weather conditions.(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess.Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank)(m) Weight of the Solar Stud should be 650 Gram approx.(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. |
| 6 | M & L for providing and applying 2.5 mm thick road marking strips n exc 15 cm width with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads - 34 % in proportion. |
| 7 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like on roads pavements with hot applied thermo plastic road marking paint with glass beads of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed |
| 8 | S & F dual directional reflective cat eye ABS Body casted stud of size not more than 130 mm and height not more than 20 mm having plastic ABS strips containing retro reflective glass beeds of colour white/red/yellow fixed with specialised epoxy system adhesive or with steel zinc plated nail of dia 12 mm of lenght 120mm for fixing to road by hammering including necessary replacement of damaged/displaced items complete all as specified and directed. |
| 9 | S & F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 10 | M & L for metal road delinators made out of 75mm bore medium grade MS pipe of length 80cm embeded with PCC 1:3:6 of size 30cm x30cm x 30cm using 20mm graded stone aggregate 30cm below road level including taking down existing corroded/broken delinators and applying tow coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective tapes of 137.5mm width red colour in 2 pieces and 137.5mm yellow/white colour 1 piece alternatively complete all as specified and directed. |
| 11 | S & F solar road delinator 6 LEDS of colour red/yellow housed in an aluminium body LEDS solar cells battery and light sensor well projected inside polycarbonate sheet diving protected with powder wire mesh cage system mounted over 47 mm dia steel tube powder coated of length 600 mm having sheet foot of 150 x 150 CRC 118mm gauge plate and PCC 1:2:4 type B-1 (using 20mm graged crushed stone aggregate) embeded size 30 x 30 x 45cm including necessary earth work in replacement of damaged reflectors complete all as specified and directed. |
| 12 | M & L for preparation of external treated surfaces of concrete/ kerb stone, facias, cornices etc by removing all scale, loose material dust etc & appyling two coat of weather proof anti fungal (Apex) paint over a coat of wall care putty and applied as per manufactured instruction complete all as specified and directed. |
| 13 | M & L for preparation of old surface of chequered cement concrete tile / interlocking/ floor surfaces, facias, cornices etc by complete removing all scale, loose material dust etc and applying one coats of weather proof anti fungal (Apex) paint as per manufacturers instruction complete all as specified and directed. |
| 14 | M & L for providing and laying at or near ground level factory made kerb stone of any size M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 15 | Taking down old sign board of any description including frame work complete all as specified and directed. |
| 16 | S & F with stainless steel frame including necessary clamps etc retro-reflective double sided road name signboards comprising of 4mm thick aluminium composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminium composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminium on both sides. the ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3 mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center ensuring that no noriveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflactive sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as back ground sheet which will be over laid with electro cut transparent film of approved make and color to create a desired road name information message. Note: (i) The rate shall include all materials, labour, equipments, fabrication transportation, erection, installation and incidentals all complete as per direction of the engineer-in-charge.( ii) Stainless steel frame shall be measured and paid seperately) |
| 17 | S & F stainless steel pipe/ tube (Grade 304) for framing of sign board of any type/ size including cutting, welding and framing of stainless steel structure complete all as specified and directed. |
| 18 | S & F in repair road safety convex mirror made of polycorbonated of size 800mm dia duly plastic framed covered and provided with holding clamp arrangement having wide field of vision Exterior weather proof bright reflection, anti-glare & easy to maintain and alongwith Pole 75mm dia and 2m long incl fixing at suiltable height as per site and fixed with PCC 1:3:6 as per manfacturers instructions complete all as specified and directed. |
| 19 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in the layers not exc 25cm complete all as specified and directed. |
| 20 | M & L for plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 21 | S & F ABS speed breakers made of sturdy plastic, highly resistance for load impacts and harsh weather conditions. its dovetail interlocking subunits make it bind perfectly into one firm mump. The pre-coloured material and UV stablisers keep them perpetually colourful studded reflectors on either side, these bumps are ideal for private/service loaded vehicles in black/yellow comination dimensions: 500 mm x 425 mm x 75 mm filling with PCC and fixing with existing black top road surface complete all as specified and directed. |
| 22 | M & L for coloured Chequered cement concrete tiles 30cm X 30cm X 20mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and pigment over screed bed or bedding layers of mortars 15 mm thick in CM 1:6 , including demolition of existing tiles complete all as specified and directed. |
| 23 | M & L for 75mm PCC 1:4:8: type D2 (using 40 mm graded stone aggregate) in floors as sub base including demolition of existing sub base complete all as specified and directed. |
| 24 | M & L for coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver block any shape and size having glossy finish of 60 mm thickness M-35 Grade grey cement and pigment complete including demolition of existing paver blocks complete all as specified and directed. |
| 25 | Labour only for coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver block any shape and size complete including demolition of existing paver blocks complete all as specified and directed. |
| 26 | M & L for Sand filling under paver blocks complete all as specified and directed. |
| 27 | M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in kerbs/ copings of interlocking tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
| 28 | M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in kerbs/ copings of interlocking tiles complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 25 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender