Tender For Addition/Alteration And Special Repair To Certain Sheds Of Depot No 1 At Esd Delhi Cantt-10 Under Ge (North) Delhi Cantt-10
Tender Value
77.67 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
6 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration And Special Repair To Certain Sheds Of Depot No 1 At Esd Delhi Cantt-10 Under Ge (North) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not other wise specifically provided for all as specified. |
| 2 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified. |
| 5 | Dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. |
| 6 | M&L Viterified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed. |
| 7 | All as per ser Item No-6 here -in-before but on vertical surface as in dados/skirting over 10mm thick rendering as backing coat in CM 1:4 complete complete all as specified and directed. |
| 8 | M & L coloured Glazed ceramic tiles in vertical surface 300 X600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 9 | M&L for non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06Sqm and not exc 0.11Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 10 | M&L for non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18Sqm and not exc 0.38Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 11 | M&L for ready mix concrete (RMC) of grade M- 25 using 20mm graded aggregate as floor finished even and smooth with proper povide of construction & dummy joint of panel not more 10 sqm each (Note : thickness of floor shall be between 75 mm to 100 mm ) |
| 12 | M&L for dummy joints as in floor finished even and smooth with proper povide of & dummy joint of panel not more 10 sqm each (Note : thickness of floor shall be between 75 mm to 100 mm ) |
| 13 | M&L for construction joints as in floor finished even and smooth with proper povide of & construction joint of panel not more 10 sqm each (Note : thickness of floor shall be between 75 mm to 100 mm ) |
| 14 | M&L for cement concrete (1:2:4) using 20mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 15 | M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified. |
| 16 | All as per ser item No 15 here in before but except bricks complete all as specified and directed. |
| 17 | M & L Cutting holes in brick walls exc half bricks not exc one bricks built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 18 | M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent etc.complete and applying two coats of oil bound distemper on wall complete all as specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water ,M&L for rendering 10mm thick Plaster in cement mortar (1:6)mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately |
| 20 | M&L for prepartion of newly plastered surface of wall and applying 1-2 mm thick wall care putty two or more coat to get even and smooth surface (Birla white or equivalent) and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.. |
| 21 | Taking down cement plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water ,M&L for rendering 15mm thick Plaster in cement mortar (1:4) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately |
| 22 | M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed. |
| 23 | M&L for preparation of old decorated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering as to remove the previous coating and making surface smooth and two coats of weather proofing exterior acrylic emulsion paint premium quality of berger or equivalent as per approved make list in Particular Specification, complete all as specified and all as directed by Engineer in charge . |
| 24 | S & F for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred stainless steel doors, ladders; framed baluster; walk ways; railings; framework and similar work confirming to SS - 304 |
| 25 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. |
| 26 | M&L for Two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 27 | S&F Solid PVC factory made door frame of size 50x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed. |
| 28 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 29 | S&F for 200mm long aluminium anodised, barrel tower bolt , extruded section complete all as specified. |
| 30 | S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed. |
| 31 | S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 32 | S&F for 150mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed. |
| 33 | S&F 300mm,Mild steel ordinary rat rail pattern springs including roller and roller plate complete. |
| 34 | S& F 250 mm long Aluminium alloy, anodised , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 35 | M&L Stainless steel chromium plated decorative curtain rod 25mm dia including brackets, side knobs and fixed to wall complete all as specified and directed. |
| 36 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each ® |
| 37 | S&F aluminium door shutter with frame100X45X1.5mm powder coated fixed to wall with steel fastnes min four number each side partly glazed with 5 mm thick tinted glass and partly panelled with 8mm thick coloured aluminium composit panels incl rubber beading, joining cleat for fixing in position, 2 numbers aluminium door handle 250 mm long, 1 number aluminium barrel tower bolt 200 mm long ,1 number aluminium floor door spring & one No 4 liver mortice lock of Godrej of size 100 mm in each shutter will be provided all as specified and directed as per following specifications --(a) Vertical Members of shutter (Style) Section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560)(b) Top rail ( Top Members) of shutter Section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19581)(c) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 2.00 mm (Section No 19596)(d) Bottom rail ( Bottom Members) of shutter Section shall be of size 150.00 x 44.45 x 2.00 mm (Section No 19584)(e) Glazing clip for securing glass of shutters shall be of 0.80 mm thick (Section No 19370). Standered quality rubber beading shall be used for securing of glass (f) Top, Bottom and verticle member of shuttert will be tightened with hexagonal nut and purpusly made bolt of 10mm dia MS round bar threaded on both the end . Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. |
| 38 | M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment , and the like, finish the surfaces even and fair without using extra cement all as directed and specified |
| 39 | Taking up or down steel tubing 15mm bore complete all as specified and directed. |
| 40 | Taking up or down steel tubing 20mm bore complete all as specified and directed. |
| 41 | Supply and Laying of CPVC pipes 16mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge. |
| 42 | Cutting chases, pinning in, making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealedwater tubing or concealed conduit wiring, etc. and making good,cutting not exceeding 10cm girth |
| 43 | Supply and Laying of CPVC pipes 20mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge. |
| 44 | S&F in repair 15mm bore bib taps cast copper alloy chromium plated with fancy type screwed down, complete all as specified and directed. |
| 45 | S & F Stop valves,fancy type chromium plated, cast copper alloy, screwed down, high pressure, fancy type screwed both ends for iron pipe or for unions and fixed |
| 46 | S&F in repairs chromium plated jet for WC with 1.00 meter long PVC pipe including necessary fitting complete all as specified and directed. |
| 47 | S & F Health haucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 48 | S & F CP toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 49 | S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge. |
| 50 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washes complete all as specified and directed. |
| 51 | S&F 20mm in repair dia brass CP Tubular towel rail , D type, 60cm long between flanges complete all as specified and directed. |
| 52 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed. |
| 53 | M & L 32mm bore brass CP bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap. all as specified and directed. |
| 54 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white(including fixing bolts, flushing cistern & flush pipe) incl black seat cover all as spd and dir. |
| 55 | Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified. . |
| 56 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 57 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 58 | S&F in repair of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, fixed to walls with clamps etc, bore of pipe 75mm complete all as specified and directed. |
| 59 | S&F 75mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) and fitted with oval access door complete all as specified and directed. |
| 60 | S&F of stack clamps for 75mm dia pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed. |
| 61 | S&F of stack clamps for 100mm dia pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed. |
| 62 | S & F 100mm cast iron cowls |
| 63 | S & F 75mm cast iron cowls |
| 64 | M & L in repair 75 mm CI floor traps including joint to waste pipe fixed in cement concrete B1 ( 1:2:4) complete all as specified and directed. |
| 65 | S & F Traps ‘P’ or ‘S’ 100mm complete all as specified and directed. |
| 66 | S & F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 67 | S & F in repair grating doom 100mm dia PTMT (Minimum weight 25 gms) complete all as specified and directed |
| 68 | S& F in repair 15 mm dia brass CP Mixture for mixing hot and cold water screwed down for iron pipe and fixed. |
| 69 | S&F kitchen sink mixture single lever with swinging spout on upper side wall mounted model with connecting legs and wall flange screwed for iron pipe of 15mm. . |
| 70 | Dismantling water tanks exc. 250 ltr & n.exc 500 ltr and removing complete all as specified and directed |
| 71 | Dismantling water tanks exc 500 ltr & n.exc 1000 ltr and removing complete all as specified and directed |
| 72 | S&F rotational moulded polythene water storage tanks, multi-layered, 500 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed. |
| 73 | S&F rotational moulded polythene water storage tanks, multi-layered, 1000Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed. |
| 74 | S & F sink with draining board, made of Stainless steel out 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mmx460mm with bowl size 410mm x330mm x160mm complete all as specified and directed. |
| 75 | S & F brass chromium plated shower rose 125mm size Complete all as specified. |
| 76 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 77 | M&L Chequered cement concrete coloured Ultra tiles 30cm/40cm x 30cm/40cm x 25mm thick , set jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 78 | Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed.. |
| 79 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sky blue/ sea green colour having tensile strength of 550 MPa as in roof covering, fixed with self tapping screws/ J hooks if required complete all as specified and directed. |
| 80 | S & F Plain mild steel sheeting, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick sea green / brick red colour having tensile strength of 550 MPa as in roof ridge covering, Valley gutters, drip and straight flashings, fixed with proper arrangement with angle truss and purlins with self tapping screws/ J hooks if required complete all as specified and directed. |
| 81 | S&F steel work in tubular trusses, purlins, false rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St. 240. |
| 82 | Dismantling structural steel work including doors, gates but excluding framed trusses all as specified and directed by engineer-in-charge. |
| 83 | S & F MS plates (plain or chequered) channels, square cut or notched ordinary and counter sunk) forming holes, without any attachment confirming to Fe -290 (Gde E-165) complete all as specified. |
| 84 | Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. |
| 85 | S&F of Corner glass self size 150mm with brackets complete all as specified. |
| 86 | S &F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long complete all as specified. |
| 87 | S&F in repair plate rack made of stainless steel 900x900x350x0.63mm including fixing as per manufacturers instruction complete all as specified. |
| 88 | M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in screed bed or bedding layer of 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite. |
| 89 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles fully perforated 12mm thick micro tegular edged or 10 mm thick square edged of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction. |
| 90 | Dismantling Wall & ceiling boards any thickness, including cover fillets, Frame work etc. |
| 91 | M & L machine precast colour concrete decorative interlocking paver block of a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified. |
| 92 | M & L sand filling under floors including watering and consolidation. |
| 93 | M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base complete all as specified and directed. |
| 94 | M&L for cement concrete Type B0 1:2:4 (12.5mm aggregate) in providing roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed. |
| 95 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 96 | M&L for point wiring with 1.5 Sq.mm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable confirming to IS 694:2010 with and including continuous earth wire of size 1.5 Sqmm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353: 1985 drawn through and in rigid non-metallic PVC concealed conduit of 20mm dia (Nominal bore) or higher, medium grade confirming to IS 9537(Part 3): 1983 complete with and including all PVC conduit accessories and factory made not less than 1.2 mm thick sunken modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM confirming to IS 14772 : 2000 having op, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover plate with frame and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732: 2019 for One light / bell point controlled by one, one way switch 06 Amps, complete all as specified and directed. |
| 97 | (a) One light point controlled by one, one way switch |
| 98 | (b) One ceiling/ exhaust fan point controlled by one, one way switch |
| 99 | (c) One socket outet point 5 amps on the independent board |
| 100 | (d) One socket outet point 5 amps on the same board |
| 101 | All as per Serial Item No 95 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 102 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete |
| 103 | S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter complete |
| 104 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete |
| 105 | S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete |
| 106 | S&F ceiling rose surface type bakelite 65x50mm three terminal complete |
| 107 | Supply and Fixing of surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. |
| 108 | S&F of decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum efficiacy at level >=100 lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete |
| 109 | Supply and fixing of on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed. |
| 110 | Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. |
| 111 | Supply & fixing of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 112 | S&F(in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 100 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing surface complete |
| 113 | S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete. |
| 114 | S&F MCB, SPN, AC, 230 volts of 40 to 63 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 115 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 25 x 4 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 116 | Taking down old/unserviceable ceiling / exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES store etc complete |
| 117 | Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 245 CFM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete all as specified and directed |
| 118 | Supply and fixing wall mounted fan of 400 mm sweep, PVC type, 230 volts, AC, 50 Hz capacity, including all arrangements for mounting of fan including connecting up with provision of PVC insulated flexible twisted type copper conductor cable 1.5 Sqmm, 2 core as required for connections complete all as specified and as directed. |
| 119 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 120 | S& F in replacement LED Inverter type bldg security light fitting complete with mounting bracket made out of light grade GI pipe 40mm bore 1.20 mtr long bend to shape including 02 Nos of 40x5mm FI clamps with GI bolt, nut, washer and 3-core copper cable connection from ceiling rose to light fitting. Specification of light fitting are as under :-(a) System Power : 35 W(b) Housing : Pressure die cast aluminium alloy having separete optical & control gear compartment, top opening, polyster powder coated after phosphochromate treatment (c) Optics : Polycarbonate UV stabilised with integrated lens(d) Light source : SMD LED module mounted on MCPCB(e) Rated Voltage : 240V(f) Safe operating Voltage : 140V to 270V(g) Rated Frequecy : 50 Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 50 deg C(l) Lumen Efficacy of LED : ≥ 140 Lm/W(m) System Luminous Efficacy : ≥ 100 Lm/W(n) CCT : 5700K(o) Driver : Inbuilt SMPS based constant current type with protections for output open / short circuit , phase to phase, over voltage & surge voltage upto 10KV.(p) IP rating : 66(q) IK rating : 07(r) Battery (Li-Ion type, Minimum Nominal Capcity:5200mAh, Minimum Backup: 02 Hrs) complete. |
| 121 | Supply and fixing in repair LED flood light fitting 200 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete. |
| 122 | S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete (Note :- MCCB & MCB SP will be measured seperately) |
| 123 | S&F of MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete |
| 124 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 32 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring.(Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 125 | All as per srl item No 120 here-in-before but 04 Sqmm nominal cross sectional area, with and including continuous earth wire of size 04 Sqmm nominal cross sectional area.(Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 126 | All as per srl item No 120 here-in-before but 2.5 Sqmm nominal cross sectional area, with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area.(Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender