Tender For Provision Of Lt Feeder Panels, Cables And Allied Accessories For Op Shelter Living Of Offrs, Jcos And Or At Tezu Under Ge (P) Lohitpur
Tender Value
44.10 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
18 days left
EMD
88200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Lt Feeder Panels, Cables And Allied Accessories For Op Shelter Living Of Offrs, Jcos And Or At Tezu Under Ge (P) Lohitpur
BOQ
| Sl. No. | Item Description |
| 1 | Steel tubular swaged poles type 410 SP-55(11 metre long) including cast iron base plate final taper plug, cap mild steel bolts, nuts screws etc including applying two coats of black bituminous paint internally and externally upto planning depth and applying two coats of aluminium paint over a coat of aluminium primer (externally) from top of PCC copping including writing MES pole No with synthetic enamel paint (first grade quality) complete all as specified . Note :- (a) Earthwork and PCC will be measured and paid under appropriate items in of Schedule 'A'.(b) Volume occupied by Steel poles ashall be deducted to derive the quantity of PCC. |
| 2 | Supply and fixing of Air Break Gang operated switch triple pole mechanically operated out door with all fittings accessories mounted on and including 11 KV porcelain insualtor and steel channel frame GI operating rod 25mm dia of suitable length with operating mechanism worked from ground level vertically operated as per site requirement including locking arrangement for operating handle complete suitable for current rating 200 Amps 11 KV working pressure with 15 insulators complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for swing out expulsion fuse single drop (drop out fuse) for 11KV for capacity upto 200 Amps complete all as specified and directed. |
| 4 | M&L for ACSR of any size and type on HT LT poles including straining, binding with insulators with copper binding wire with insulators as in OH condutors, providing PVC sleeves for jumper complete all as specified and directed. |
| 5 | Supply and fix lightning arrestor metal oxide type, distribution class, discharge capacity 5 Kilo Amps suitable for 11KV, conforming to IS 3070 complete all as specified and directed. |
| 6 | S& F Cross arms, bracings, supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide chrome primer and two coats of aluminium paint including preparation of surfaces complete all as specified and directed. |
| 7 | Pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvansied iron nut 150mm height 150mm dia for 11000 Volts grade complete all as specified and directed. |
| 8 | M&L for anti climbing device, spikes type fabricated out of MS bars (round, square and flat) including nuts bolts washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed. |
| 9 | Danger notice plate of size 25x20 cm of 1.6 mm thick mild steel vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT conforming to IS 2551 complete all as specified and directed. |
| 10 | M&L for laying IS marked un-reinforced precast concrete cable cover as per IS 5820-1970 class HV type 1 with peak size 300x180x40 mm complete all as specified and directed. Note : All cable covers to be embossed with HT cable complete all as specified and directed. |
| 11 | Supply and fix cable jointing kit for 11KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 Sqmm complete all as speciified. |
| 12 | Supply and fix cable jointing kit for 11KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 Sqmm complete all as speciified. |
| 13 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 35 sq mm complete all as speciified. |
| 14 | Supply install testing and commissioning of distribution Transformer outdoor, step down copper wound having primary side for HT and secondary side for 3 phase 433 Volts 4 wire 50 Hz capacity of 100 KVA and engery efficient level 3 as per IS 1180 of 2014 Part I with the following specification :-(a) No load voltage ratio-11/433 KV (b) Type of cooling - ONAN(c) No of Phase- 03(d) Frequency 50 Hz(e) Two earthing for body earthing and two additional for neutral brought out on a bushing.(f) First fill of oil oil level gauge indicating oil level minimum and maximum.(g) Lifting Lugs(h) Rating and terminal marking plates.(j) Dehydrating breathing device which would not permit entrance of rain water and insects.(k) Drain cum sampling valve (3/4\\" nominal size thread) preferably steel with plug.(l) Thermometer pocket.(m) OIl filling hole (1-1/4\\" nominal size thread) with cover.(n) Connection - Delta/Star.(o) Temperature rise in oil - 45 C(p) Temperature rise in windings 55 C(q) Material winding Copper wound.(r) High voltage/low voltage bushing with box(s) Service outdoor type. (t) Neutral internally connected with earthing lead and bush.(u) Off load tap changing (+ or - 75% in step of + or - 2.5 % as per reveal IS) Please Enable Macros to View BoQ information |
| 15 | Supply install testing and commissioning of distribution Transformer outdoor, step down copper wound having primary side for HT and secondary side for 3 phase 433 Volts 4 wire 50 Hz capacity of 100 KVA and engery efficient level 3 as per IS 1180 of 2014 Part I with the following specification :-(a) No load voltage ratio-11/433 KV (b) Type of cooling - ONAN(c) No of Phase- 03(d) Frequency 50 Hz(e) Two earthing for body earthing and two additional for neutral brought out on a bushing.(f) First fill of oil oil level gauge indicating oil level minimum and maximum.(g) Lifting Lugs(h) Rating and terminal marking plates.(j) Dehydrating breathing device which would not permit entrance of rain water and insects.(k) Drain cum sampling valve (3/4\\" nominal size thread) preferably steel with plug.(l) Thermometer pocket.(m) OIl filling hole (1-1/4\\" nominal size thread) with cover.(n) Connection - Delta/Star.(o) Temperature rise in oil - 45 C(p) Temperature rise in windings 55 C(q) Material winding Copper wound.(r) High voltage/low voltage bushing with box(s) Service outdoor type. (t) Neutral internally connected with earthing lead and bush.(u) Off load tap changing (+ or - 75% in step of + or - 2.5 % as per reveal IS) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender