Tender For Special Repair To Certain Light And Other Misc E/M Work At Af Stn Darbhanga Under Ge Af Bihta.
Tender Value
22.61 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
4 days left
EMD
45220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darbhanga → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Certain Light And Other Misc E/M Work At Af Stn Darbhanga Under Ge Af Bihta.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5 m wide for foundations, laying cables/ pipes etc. not exceeding 1.5 m deep and getting out in SOFT/LOOSE soil complete, all as specified |
| 2 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete, all as specified. |
| 3 | Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 4 | Cutting the existing road straight by manual, depth and width not less than 1 metre below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 using 20mm graded aggregate stone complete all as specified. |
| 5 | NOTES APPLICABLE TO SERIAL ITEM 1 TO 4: (a) Excavation work shall be carried out manually only.(b) LT/HT cable, water supply/ sewage/telephone lines, if any, get damaged during excavation & earthwork, demolition of PCC shall be repaired by the contractor immediately as per existing specifications to the entire satisfaction of Engineer-in-Charge. |
| 6 | Clean dry sand ( locally available) as cushioning for under ground cable 230 mm thick (one layer of 80 mm thickness before laying the cable and other layer of 150 mm thickness after laying the cable) complete all as specified.NOTE:- Punned down thickness (over all 180 mm) shall be considered for measurement and payment. |
| 7 | Brick protection with old size sub class 'B' bricks laid flat across the route of underground cable all as specified and directed |
| 8 | PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in foundation of electric poles, struts, PCC block including necessary form work and fair finish to exposed surfaces without using extra cement etc. complete all as specified and directed |
| 9 | PCC (1:2:4) type B-1 using 20mm graded stone aggregate as coping of poles etc. with slightly rounded or chamfered angles including necessary form work with fair finished surfaces of concrete complete all as specified. |
| 10 | GI pipe 40 mm bore light grade with all fittings fixed as termination postal ,fixed to poles/ walls/ under floors/ under road/ trenches etc complete all as specified |
| 11 | Supplying, laying, jointing and testing XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 35 sqmm 3.5 core laid in trenches/ ducts/ along poles/ through pipes including taking out existing cable complete all as specified |
| 12 | PVC insulated & sheathed stranded aluminium conductor twin core cable 1100 Volts of size 2.5 sq. mm ( nominal area) conforming to IS 694 for making connection from junction box to light fittings including taking out existing cable complete all as specified |
| 13 | LED street light 45 watt, 230 V AC,outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal managment in multiple optics complete with IP 65/66 protction, IN REPLACEMENT, and making connections, complete. |
| 14 | LED street light 70 watt, 230 V AC,outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal managment in multiple optics complete with IP 65/66 protction, IN REPLACEMENT, and making connections, complete. |
| 15 | LED flood light 170 watt, 230 V AC,outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal managment in multiple optics complete with IP 65/66 protction, IN REPLACEMENT, and making connections, complete. |
| 16 | Security light bracket made of 40 mm bore GI light grade pipe 1.5 metre long bend to shape including necessary welding to pole(s) or fixed with suitable size of flat iron clamps, nuts, bolts and washers etc. IN REPLACEMENT, wit & including two coats of synthetic enamel paint over a coat of primer complete all as specified Please Enable Macros to View BoQ information |
| 17 | Security light bracket made of 40 mm bore GI light grade pipe 1.5 metre long bend to shape including necessary welding to pole(s) or fixed with suitable size of flat iron clamps, nuts, bolts and washers etc. IN REPLACEMENT, wit & including two coats of synthetic enamel paint over a coat of primer complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender