Tender For special Repair Of Bldg No P-149/06 To P-149/08 And P-149/15 Of 110 Inf Bn (Ta) Madras At Sector I Of Haft Chinar Military Station And special Repair To Bldg No P-34 Of 110 Inf Bn (Ta) Madras At Sector-Iv Of Haft Chinar Military Garrison Un
Tender Value
29.13 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
16 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-149/06 To P-149/08 And P-149/15 Of 110 Inf Bn (Ta) Madras At Sector I Of Haft Chinar Military Station And special Repair To Bldg No P-34 Of 110 Inf Bn (Ta) Madras At Sector-Iv Of Haft Chinar Military Garrison Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | S&F for Pre- painted galvatume aluminum zinc coating CGI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified and directed. |
| 3 | S&F for Pre-painted galvalume aluminum zinc coating CGI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 4 | M&L for 6mm verneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards and frame wk of any description complete all as specified and directed by Engr-in-charge |
| 5 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 6 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm complete all as specified and directed. |
| 7 | S&F Providing and fixing Gypsum Board 10/8mm thick decorative type in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 8 | S&F 5 mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 9 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solven cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 10 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 11 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @2% by weight of cement and finished surface even and smooth without using extra cement including necessary scaffolding etc. Note : WPC shall be measured and paid seprately. |
| 12 | Supply only WPC (water proofing cumpound) complete all as specified and directed. |
| 13 | M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L 15mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement as specified. |
| 15 | M&L Applying two coats of Distemper oil emulsion, white or tinted over 2 mm thick wall care putty on new wall surface including preparation of surface all complete and as specified. |
| 16 | M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick birla white putty including preparation of surface complete all as specified and directed. |
| 17 | M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed. |
| 18 | M&L Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 19 | M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 20 | M&L Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 21 | Taking down chowkat or frames exc 1.5 Sqm but n exc 4.0 Sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 22 | Taking down Chowkats or frames not exc. 1.5 Sqm m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 23 | Taking down Shutters of any description exc 1 Sqm and n exc 2 sq. m each complete all as specified and directed. |
| 24 | S&F for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101mmx44mmx3mm thick (b) Shutter top 80mmx44mmx3mm thick. (c) Shutter bottom 110mmx44mmx3mm thick (d) Shutter vertical 80mmx44mmx3mm thick (e) Shutter middle 80mmx44mmx3mm thick. (f) Gauging clip weighing not less than 0.097kg/metre Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane shall be measured and paid separately. . |
| 25 | S&F for aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. |
| 26 | M&L for 3mm-5mm ACP board for fixing in aluminium partition and doors complete all as specified and as directed. |
| 27 | S&F 2nd class hardwood Plain, solid, straight, chowkat & Frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 28 | S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 29 | S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws anodised aluminium fittings such as peg stays 150mm long, hinge type B-21 100mm long, suitable handle complete all as specified |
| 30 | S&F 30mm thick, 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge |
| 31 | S&F 30mm thick 2nd class hardwood Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beats for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed. |
| 32 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site as per specification & drawing. |
| 34 | S&F in stainless steel Butt hinges 100mm size, medium weight cold rolled complete all as specified and directed. |
| 35 | S&F in extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and directed. |
| 36 | S&F in Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 37 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionS&Fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 38 | S&F figured glass, pin head type and glazing with oil putty in squares 4 mm thick, n.exc 0.5 Sqm in each pane as in ventilatorall as specified and directed. |
| 39 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed. |
| 40 | S&F tinted glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as per requirement and direction of Engineer-in-Charge. |
| 41 | S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples |
| 42 | S&F as in repair 20mm bore mild steel cromium plated curtain rods, suitable for door/windows curtain with incl necessary fancy type dooms incl dismantling as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed. |
| 43 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises as specified and directed. |
| 44 | M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate complete all as specified and directed. |
| 45 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed. |
| 46 | All as per item No 45.00 above, but above but as in skirting over 10 mm thick screed in CM (1:4) as specified and directed. |
| 47 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed. |
| 48 | All as per item No 47.00 above, but as in skirting over 10 mm thick screed in CM (1:4) as specified and directed. |
| 49 | S&F coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 50 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, skirting, aprons etc. complete all as specified and directed. |
| 51 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM (1:4) complete all as specified and directed. |
| 52 | M&L 20mm thick Granite (of any type) tiles machine cut in skirting/dado over 15mm thick plater in CM (1:6) & jointed witht grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing complete all as specified and directed. |
| 53 | M&L johnson endura paving coloured tiles of technocommercial equivalent of size 300mmx300mmx10mm set and jointed in neat cement slurry pointed with white or coloured cement laid over and incl 15mm thick screed bed built in CM (1:4) after demolition old floor hearth or wall tiling complete all as specified & directed |
| 54 | S&F in repairs Vitreous china squatting pan Orrisa pattern white/coloured of size 580x440mm with integral foot rest with P or S trap excluding flushing cistern and flush pipe complete all as specified and as directed. |
| 55 | S&F in repair PVC 10 ltrs capacity low level flushing cistern complete set including flush pipe all as specified and directed. |
| 56 | S&F in repair vitreous china wash basin, white flat back size 550x 400 mm incl. brackets ,cutting for pinning in ends of brackets as fixed all as specified and directed. |
| 57 | S&F in repair vitreous china Urinal, Half stall type,(580 x 380 x350 mm min) white(excluding flushing cistern and flush pipe) fixed all as specified and directed. |
| 58 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) complete all as specified and directed. |
| 59 | S&F in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and as directed. |
| 60 | S&F in repairs PVC waste pipe 50mm dia for urinal complete all as specified and as directed . |
| 61 | S&F in repair 600 x 450 mm bevelled edge mirror or alu/metal frame of selected quality glass mounted on 6 mm thick AC bldg board fixed with wooden plug with chromium plated brass screw and cup washer all as specified and directed. |
| 62 | S&F in repair for shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour. (min. weight 40 gms) complete all as specified and directed. |
| 63 | S&F in repair brass chromium plated wall mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed. |
| 64 | S&F in repair Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed. |
| 65 | S&F in repair soap dish brass chromium plated fixed to wall with brass choRMium plated screw and plastic plug etc. completed all as specified and directed. |
| 66 | S&F as in repair MS Grating doom 100 mm dia (min. weight 25 gms) complete all as specified and directed. |
| 67 | S&F in repair for Rotational moulded polyethylene 500Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position all as specified and directed |
| 68 | S&F in repair for Rotational moulded polyethylene 1000Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position all as specified and directed |
| 69 | S&F in repair Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe & fixed. (min weight 15mm-142 gms) all as specified and directed. |
| 70 | S&F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 71 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 72 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 73 | M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool pre-foRMed mineral wool pre-foRMed `SNAP ON' pipe secions of density 144 Kg/cum confirming to IS 9842 on pipe of internal dia 20 mm complete all as specified and directed. |
| 74 | M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRMal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 75 | M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRMal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 76 | Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 77 | S&F in repair 15mm bib tap chromium plated with crutch or butterfly handle screwed for iron pipe complete all as specified and directed. |
| 78 | S&F in repair brass chromium plated pillar/basin mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed. |
| 79 | S&F in repair 15mm stop valve angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed. |
| 80 | S&F in repair PVC connection pipe 15mm size with PTMT nuts of length 600mm all as specified and directed. |
| 81 | S&F in repair Towel rail 600mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) |
| 82 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 83 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 84 | All as per item No 83.00 above but 75mm dia all as specified and directed |
| 85 | S&F 110 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed. |
| 86 | S&F 75 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed. |
| 87 | S&F 110 mm dia PVC (SWR) bend any radius all as specified and directed |
| 88 | All as per item No 87.00 above, but 75mm dia all as specified and directed |
| 89 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia provided with eccess door complete all as specified and directed. |
| 90 | All as per item No 89.00 above, but above but 75mm dia |
| 91 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed. |
| 92 | S&F 110 mm dia PVC (SWR) vent cowl all as specified and directed. |
| 93 | M&L Concrete bed to 100mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested complete all as specified and directed. |
| 94 | M&L Concrete bed to 75mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D2 all as specified and directed. |
| 95 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified & directed. |
| 96 | M&L Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 97 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or incl fixing cantelever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm and dismantling complete all as specified and directed. |
| 98 | Dismantling timber scantling 40 Sqcm and over in section in any position complete all as specified and directed. |
| 99 | M&L for second class soft-wood, timber framed and fixed, clean sawn, in scantlings complete all as specified and as directed by the Engineer-in-Charge |
| 100 | Dismantling boarding, any description fixed in any position with nails complete as specified and directed |
| 101 | S&F second class softwood 30 mm thick boarding and fixed with nails in any situation clean sawn with butt joints complete all as specified and directed. |
| 102 | S&F second class softwood 15 mm thick boarding and fixed with nails in any situation clean sawn with butt joints and Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar complete all as specified and directed. |
| 103 | Dismantling wrought iron of mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | M&L for roof trusses(framed) quality 410-W(Gde-E-250) quality A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets, framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc all complete all as specified and as directed. |
| 105 | M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 106 | M&L for mild steel Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedtubes confoRMing to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 107 | M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) foRMing holes, with riveted, bolted or welded attachment Fe 410 -W(Gde- E- 250) quality A complete all as specified and directed |
| 108 | Demolition of cement Concrete 75mm in ground floor and paving n exc 15 cm thickness below or above ground level compltet as directec by Engr-In-Charge. |
| 109 | M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded stone aggregate complete all as specified and as directed by the Engr-In-Charge. |
| 110 | M&L for Chequered cement concrete tiles 20cm x 20cm x 20/25mm thick, set jointed and pointed in neat cement slurry in floors, with mixture of white & gray cement in equal proportions & no pigment floors, cut and polished over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by the Engr-In-Charge. |
| 111 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50 Mtr & making good surface in soft/loose soil complete all as specified and as directed. |
| 112 | M&L for Plain cement concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregate) as in foundations fillings and mass concrete or embeding in fencing post complete all as specified and as directed. |
| 113 | Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendants, light fitting and making good the distributed surfaces of walls, floors as existing |
| 114 | Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface. |
| 115 | M&L Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC casing & caping with mild steel modular sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaust point/ bell point controlled by one switch 5 Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) complete all as specified and directed. |
| 116 | All as per the item No 115.00 above, but for one socket outlet 15 Amps on independent board using cable 2.5 sqmm for phase, neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 117 | All as per the item No 115.00 above, but for one socket outlet 5 Amps on same board using cable 1.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 118 | All as per the item No 115.00 above, but for one socket outlet 5 Amps on indep board using cable 1.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 119 | All as per the item No 115.00 above, but for one socket outlet 15 Amps on independant board using cable 2.5 sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 120 | S&F Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed |
| 121 | S&F in repairs for MCB SPN 32 Amps, 240 V 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 122 | S&F in repairs for MCB SP 6 TO 32 Amps 10 KA 240 V 'B' curve in the MCB DB complete with connection testing and commissioning all as specified and directed |
| 123 | S&F in repairs Switch socket combination 3 pin 16A, flush type all as specified and directed |
| 124 | S&F in repairs Switch socket combination 2 in 1, 6A flush type all as specified and directed |
| 125 | S&F in repairs Socket outlet 2 in 1, 3 pin, 6A all as specified and directed |
| 126 | S&F in repairs Switch piano, flush type single pole, one way 6 Amp. |
| 127 | S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type all as specified and directed |
| 128 | S&F 1x20 W LED 6000K (4 ft) decorative ultra slim sqare profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp. |
| 129 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed |
| 130 | S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. |
| 131 | S&F r MCB SPN 63 Amps, 240 V 10KA 'C' curve in the MCB DB complete with connection testing and commissioning. |
| 132 | S&F white cover plate with frame, 6 module complete all as specified and directed |
| 133 | S&F white cover plate with frame, 3 module complete all as specified and directed |
| 134 | S&F white cover plate with frame, 4 module complete all as specified and directed |
| 135 | S&F Metal flush box 6 module complete all as specified and directed |
| 136 | S&F Metal flush box but 3 module complete all as specified and directed |
| 137 | S&F Metal flush box but 4 module complete all as specified and directed |
| 138 | S&F in repairs modular Switch socket outlet 3 pin, 16 amp, flush type complete all as specified and directed |
| 139 | S&F in repairs modular Switch socket outlet 3 pin 6 amp' flush type complete all as specified and directed |
| 140 | S&F in repairs Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed |
| 141 | S&F for Modular switch 1 way 6A, 1 module all as specified and directed |
| 142 | S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type complete all as specified and directed |
| 143 | S&F Wall mount fan complete with accessories, 230 V, 450 mm sweep, 1300 RPM Min air delivery 60 CMM with service value 6.00 BEE. Five star rated complete all as specified and directed by Engr-in-charge. Note: Old Unsv fan deposite to Store yard complete all as specified and directed |
| 144 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 145 | S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 146 | Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5m in depth and getting out for taking out/laying of GI pipe of any size complete all as specified and directed |
| 147 | Returning, filling including , spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed |
| 148 | Removing excavated materia;s to distance not excedding 50m and deposting where directed as level not exceeding 1.5m above the starting point complete all as specified and directed |
| 149 | Supply and Laying of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing complete all as specified and directed. Size of (a) 20 mm dia. |
| 150 | M&L for construction of Brick Masonry valve chamber of size 600x600x600mm (Internal dimensions) with PCC 1:4:8 type D2 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 type C2 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/dense soil, MS sheet cover 4mm thick and MS equal angle iron 50mmx50mmx6mm frame as per existing size with locking arrangement embedded in PCC suitable for 25/40/50mm gate valve and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete including dismantling old/damaged valve pits complete all as specified and directed |
| 151 | M&L Making connection of PPR 20 mm dia distribution branch with PPR main of sizes 40 mm to 75 mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. |
| 152 | S&F PPR gate valve (brass insert) of size 20 mm dia including connection and testing complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender