Tender For Repair And Replacement Of Electric Wiring, Light Fittings And Connected E/M Items At Manekshaw Marg, Urban Village, Church Road, Hq Delhi Area, Stn Hq, Did Line, Dapu, Harbux Stadium, Printing Press Complex, 10 Pars, Echs, 1 Dte, Huts And
Tender Value
49.04 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
98098
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Electric Wiring, Light Fittings And Connected E/M Items At Manekshaw Marg, Urban Village, Church Road, Hq Delhi Area, Stn Hq, Did Line, Dapu, Harbux Stadium, Printing Press Complex, 10 Pars, Echs, 1 Dte, Huts And Connected Areas Under Delhi Area, Manekshaw Marg Service Centre In The Area Of Age E/M Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed. |
| 2 | Material and labour of point wiring complete with single core 2.5 Sqmm (nominal area) FRLSH PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm min dia and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLSH PVC insulated unsheathed 2.5 Sqmm copper conductor mulistranded earth single core wire, connecting to common earth dolly with and incl Metal flush box of suitable size (Design and colour as directed by Engineer-in-Charge ) for fixing modular switches/sockets etc. for one light point / fans/bell point controlled by one 1-way switch complete all as directed. |
| 3 | One light point/ fan point/ bell point controlled by one switch |
| 4 | One socket outlet 5 Amps controlled by one switch on same board |
| 5 | One socket outlet 5 amps controlled by one switch on independent board |
| 6 | Description all as per item No. 2.00 here in before but wiring with 4.0 sqmm copper wire and 4.0 sqmm earth wire for socket out let on independent board. |
| 7 | S & F Modular switch (Shrounded Terminal, Min IP-20 protected) 6 Amp, 1 way, 1 module size complete Design and colour as directed by Engineer-in- Charge. |
| 8 | S & F modular socket (Shrounded Terminal, Min IP-20 protected) two-in-one, 6 Amp universal type, 02 module size complete all as directed. |
| 9 | S & F Modular switch (Shrounded Terminal, Min IP-20 protected) 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed. |
| 10 | S&F modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 11 | S & F modular Socket (Shrounded Terminal, Min IP-20 protected), 16 Amp, multipurpose shutter type, 02 module size complete all as directed. |
| 12 | S&F modular Step Fan regulator, 120 watts single / double module all as directed. |
| 13 | Supply and fixing LED light fitting 1X20 W,220V AC decorative with driver, holder, power coated housing made of aluminium,THD<10%, Frequency 50Hz, lumens efficiency > 120 lm/watt and Min 50000 Hrs burning life including LED tubelight connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete. Note:- ( Make of LED Light fitting & Driver shall be same and the manufacturer shall have in house NABL accredited Lab) |
| 14 | Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder, power coated housing made of aluminium, THD<10%, Frequency 50Hz, lumens efficiency > 120 lm/watt and Min 50000 Hrs burning life including LED tubelight connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete. Note:- ( Make of LED Light fitting & Driver shall be same and the manufacturer shall have in house NABL accredited Lab) |
| 15 | S&F of bulk head fitting 6.5 W lumens 100 to 160 per watt, with PMMA diffuser complete all as specified and directed. |
| 16 | Supply and fixing of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed. |
| 17 | S & F of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. |
| 18 | Supply and fixing of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 19 | S&F of Modular white cover plate with frame 1 module all as directed |
| 20 | S&F of Modular white cover plate with frame 3 module all as directed |
| 21 | S&F of Modular white cover plate with frame 4 module all as directed |
| 22 | S&F of Modular white cover plate with frame 6 module all as directed |
| 23 | S&F of Modular white cover plate with frame 12 module all as directed |
| 24 | S&F of Modular white cover plate with frame 18 module all as directed |
| 25 | S&F in repair switch piano flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 26 | S&F in replacement switch piano flush type, 16 amps one way,SP,230 volts AC all as directed. |
| 27 | S&F in replacement socket outlet 6 amps 5 pin , all as directed. |
| 28 | S&F in replacement socket outlet 6&16 amps 6 pin all as directed. |
| 29 | S&F in replacement piano type Step fan regulator, 120 watts single module swich type/socket type and as specified and directed by Engr-In-Charge all as directed. |
| 30 | S&F in replacement Modular white cover plate with frame 1 module all as directed |
| 31 | S&F in replacement Modular white cover plate with frame 3 module all as directed |
| 32 | S&F in replacement Modular white cover plate with frame 4 module all as directed |
| 33 | S&F in replacement Modular white cover plate with frame 6 module all as directed |
| 34 | S&F in replacement Modular white cover plate with frame 12 module all as directed |
| 35 | S&F in replacement Modular white cover plate with frame 18 module all as directed |
| 36 | S&F in replacement Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 37 | S&F in replacement Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 38 | S&F in replacement Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 39 | S&F in replacement Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 40 | S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 41 | S&F in replacement Modular Metal Flush Box 18 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 42 | S & F in replacement Modular switch (Shrounded Terminal, Min IP-20 protected) 6 Amp, 1 way, 1 module size complete Design and colour as directed by Engineer-in- Charge. |
| 43 | S & F in replacement modular socket (Shrounded Terminal, Min IP-20 protected) two-in-one, 6 Amp universal type, 02 module size complete all as directed. |
| 44 | S & F in replacement Modular switch (Shrounded Terminal, Min IP-20 protected) 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed. |
| 45 | S&F in replacement modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 46 | S & Fin replacement modular Socket (Shrounded Terminal, Min IP-20 protected), 16 Amp, multipurpose shutter type, 02 module size complete all as directed. |
| 47 | S&F in replacement modular Step Fan regulator, 120 watts single / double module all as directed. |
| 48 | Supply and fixing in replacement of lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed. |
| 49 | Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed. |
| 50 | Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed. |
| 51 | Supply and fixing in replacement of wall light fitting decorative type suitable for LED lamp complete all as directed.Make-philips with cat no 919215850141 and equivalent . |
| 52 | Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed. Make-philips with cat no 919215850141 and equivalent |
| 53 | Supply and fixing in replacement LED light fitting 1X20 W,220V AC decorative with driver,holder,power coated housing made of aluminium ,THD<10% , Frequency 50Hz , lumens efficiency > 120 lm/watt and Min 50000 Hrs burning life including LED tubelight connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete. Note:- ( Make of LED Light fitting & Driver shall be same and the manufacturer shall have in house NABL accredited Lab) |
| 54 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder,power coated housing made of aluminium, THD<10% , Frequency 50Hz, lumens efficiency > 120 lm/watt and Min 50000 Hrs burning life including LED tubelight connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete. Note:- ( Make of LED Light fitting & Driver shall be same and the manufacturer shall have in house NABL accredited Lab) |
| 55 | S&F in replacement of bulk head fitting 6.5 W lumens 100 to 160 per watt, with PMMA diffuser complete all as specified and directed. |
| 56 | Supply and fixing in replacement of LED ceiling light fitting 15 watt lumens 100 to 160 per watt, in round shape, surface type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. |
| 57 | Supply and fixing in replacement of LED ceiling light fitting 10 /12watt lumens 100 to 160 per watt, in round shape, surface type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. |
| 58 | S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. |
| 59 | Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 60 | Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked and 1 x 4 sqmm (same specification) as earth wire in existing PVC conduit complete all as directed. |
| 61 | Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed. |
| 62 | Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard. |
| 63 | Supply and fixing in replacement MCB SPN 32/40 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard. |
| 64 | Supply and fixing in replacement MCB SPN 63 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard. |
| 65 | Supply and fixing in replacement of Modular AC 25 Amps SP mini MCB, 230 Volts, 50Hz for module sheet complete all as specified and as directed. |
| 66 | S&F of MCB DB conforming to IP 43 - IK 09 with double door, SPN 16/12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard. |
| 67 | S&F of MCB DB conforming to IP 43-IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 68 | Supply and fixing in replacement of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. |
| 69 | S & F in replacement of MCCB, 415 volts, three pole of cap 100/125/160 Amps (site requirement) 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader /thimbles of suitable size and making connections complete all as directed. |
| 70 | Supply and fixing of PVC casing & caping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories complete all as directed. |
| 71 | S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete for surface mounted / concealed including cutting chases in wall and making good the surface all as specified and and as directed. |
| 72 | Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed. |
| 73 | Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed. |
| 74 | S&F of electric Wall mounted 400mm BLDC fan aerodynamically designed resin blades with powder coated guard with flexible ring and oscillation and speed control by pull cord system, connected compete all as specified and directed . |
| 75 | Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard. |
| 76 | M&L for rewinding of exhaust fan(300mm)/wall mounting fan (400mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/ testing to the entire satisfaction of Engineer-in-charge. |
| 77 | M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge. |
| 78 | S & F in replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection complete all as specified and directed |
| 79 | S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed. |
| 80 | M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed |
| 81 | S&F MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed. |
| 82 | S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed. |
| 83 | S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed. |
| 84 | S&F PVC Gang Box suitable for one No 5 Amps Switch complete all as specified and as directed. |
| 85 | S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket complete all as specified and as directed. |
| 86 | S & F in replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. |
| 87 | S & F in replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. |
| 88 | Supply and fixing in replacement of 'T' cover Bakelite sheet 2 mm thick in round shape complete all as specified. |
| 89 | S&F in replacement of Bakelite sheet 3mm thick of size 8\\"x5\\" duly wire cut for switches, sockets, regulator etc as per site requirement as directed. |
| 90 | S&F in replacement of Bakelite sheet 3mm thick of size 8\\"x10\\"duly wire cut for switches, sockets, regulator etc as per site requirement all as directed. |
| 91 | S&F in replacement of Bakelite sheet 3mm thick of size 10\\"x12\\" duly wire cut for switches, sockets, regulator etc as per site requirement all as directed. |
| 92 | Taking down carefully water geyser any capacity, cable sealing end and dismantling of heating element, thermostate etc and refixing after repairs, connecting up and testing for satisfactory heating of water complete all as specified and as directed. Note- Spare parts shall be measured and paid separately as supply only. Please Enable Macros to View BoQ information |
| 93 | Taking down carefully water geyser any capacity, cable sealing end and dismantling of heating element, thermostate etc and refixing after repairs, connecting up and testing for satisfactory heating of water complete all as specified and as directed. Note- Spare parts shall be measured and paid separately as supply only. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender