Tender For Repair/Maintenance Of Wooden And Steel Furniture At Mil Stn Banbasa Under Ge(Mes) Pithoragarh
Tender Value
12 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
10 days left
EMD
24000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Wooden And Steel Furniture At Mil Stn Banbasa Under Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | 1. Charpoy GI pipe (FD-220) |
| 3 | S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.(Make : Jindal/Surya/Tata) |
| 4 | (b) 3 way 32 mm dia GI elbow ISI mark |
| 5 | (c) Check nuts of 32 mm dia |
| 6 | Conversion of 32 mm dia long rail obtained from item No 1.00 (a) above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow. |
| 7 | Conversion of 32 mm dia short rail obtained from item No 1.00 above into two numbers leg including fixing to 3 way 32 mm dia elbow at one end threaded. |
| 8 | Reassembling/Tightening the loose components of frame including welding of broken existing MS flat iron stiffners to the long rails before fixing of ply top with frame of charpoy GI pipe ply top complete all as specified & directed by Engr-in-charge. |
| 9 | S&F in repair MS flat iron stiffener of size 35x5mm fit to long rails as per requirement including welding/fixing with nut and bolt of required size to long rails of charpoy GI pipe ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-charge. |
| 10 | Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy GI PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply /Century Ply/Greenply fixed to charpoy GI PlyTop with suitable size of steel nut & bolt with washer. |
| 11 | 2. Chair steel tubular with/ without arms (FD-75 M) |
| 12 | S & F following components of Chair steel tubular with/ without arms made out of shisham wood painted with two coats of black paint over a coat of wood primer duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed.(a) Seat frame |
| 13 | (b) Back frame |
| 14 | (c) Handle made of shisham wood painted with two coats of black paint over a coat of wood primer and fixed to the chair tubular with arms with screws of suitable size. |
| 15 | S & F MS Flat rail as per existing size of the chair ,thick welded at four corner to provide complete support to the seat and back and screwed with the seat or back at two places. Duly painted with smoke grey paint over a coat of red oxide. |
| 16 | S & F new PVC shoe |
| 17 | Preparation of old worn out surfaces of Chair Steel tubular with/without arms and painting with two coats of synthetic enamel paint smoke grey colour to chair steel tubular with/without arms 2 Nos of PVC caps on the top of the frame. |
| 18 | 3. Charpoy IP Steel PlyTop : |
| 19 | Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy IP Steel PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply/Century Ply /Greenply fixed to charpoy IP Steel PlyTop with suitable size of steel nut & bolt with washer. |
| 20 | Welding of broken existing MS tube stiffners to the long rails before fixing of ply top with frame of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shadecomplete all as specified & directed by Engr-in-charge. |
| 21 | S&F in repair MS tube stiffener of size 25x25mm x 16 G square shape fit to long rails as per requirement including welding to long rails of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 22 | S&F in repair MS cleat of size 25x60x6mm fit to short rails as per requirement including welding to short rails of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge. |
| 23 | S & F hard rubber shoes as per drg and as directed by Engr-in-Charge. |
| 24 | M&L for derusting denting of frame of Charpoy IP Steel PlyTop by applying minor welding wherever required and apply black synthetic enamel paint complete all as specified and directed. |
| 25 | 4. Almirah steel Med (FD 67/1032) |
| 26 | S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed(a) Lock brass 6 lever with duplicate keys of Make-Godrej/Link/Hettich/Harrison |
| 27 | (b) Handle 100 mm size chromium plated |
| 28 | S&F in repairs 3 way locking device with necessary fittings and painted with two coats of synthetic enamel paint of Silver color over a coat of red oxide primer, rest all as specified on drg and as directed. |
| 29 | S&F in repairs leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of of Silver hammer tone shade over a coat of red oxide primer, rest all as specified on drg and as directed |
| 30 | S&F in repairs door shutters made of 1mm thick CRCA sheet 3 way locking device, key hole and painted with two coats of smoke grey color paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 31 | S&F in repairs shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of smoke grey color over a coat of primer rest all as specified on drg and as directed. |
| 32 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Almirah Med steel with shelves shall be painted with two coats of Silver hammer tone paint over a coat of red oxide complete all as specified and as directed. |
| 33 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External three sides, Top, Bottom and legs shall be painted two coats of Silver hammer tone paint over a coat of red oxide whereas External Surface of doors of Almirah med steel shall be painted with two coats of Slate / Dark grey colour over a coat of red oxide complete all as specified and as directed. |
| 34 | 5. Almirah Steel Large (FD-1031,FD/E6/MAP/18) |
| 35 | S & F following components of Almirah steel large including dismantling unservicable one all as specified and as directed(a) Lock 6 lever with duplicate keys of Make: Godrej/Link/Hettich/Harrison |
| 36 | (b) Handle 100 mm size chromium plated |
| 37 | (c) 3 way locking device with necessary fittings and painted with two coat of smoke grey color paint over a coat of primer. |
| 38 | Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of silver hammer tone paint over a coat of primer. |
| 39 | Supply and fix door shutters made of 1mm thick CRCA sheet 3 way locking device, key hole and painted with two coats of Silver Hammer Tone paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 40 | (Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of smoke grey color paint over a coat of primer. |
| 41 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Almirah Large steel with shelves shall be painted with two coats of Silver Hammer Tone paint over a coat of red oxide complete all as specified and as directed. |
| 42 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External / Outer Surface shall be painted two coats of Silver hammer tone paint over a coat of red oxide complete all as specified and as directed. |
| 43 | 6. Locker steel (FD-1029) |
| 44 | S & F following components of Locker steel including dismantling unservicable one all as specified and as directed.(a) Handle 100 mm size chromium plated |
| 45 | (b) Hasp & staple chromium plated |
| 46 | S&F in repairs leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of silver hammer tone paint over a coat of primer. |
| 47 | S&F in repairs door shutters made of 1mm thick CRCA sheet 3 way locking device, key hole and painted with two coats of smoke grey color paint over a coat of red oxide primer inside and maroon hammer tone shade over a coat of red oxide primer outside after preparation of surface complete all as specified and shown on drawing, rest all as specified on drg and as directed. |
| 48 | S&F in repairs Lock brass 6 lever with duplicate keys of Make-Godrej/Link/Hettich/Harrison of Locker Bed side steel. |
| 49 | S&F in repairs shelves made of 1mm thick CRCA sheet welded/riveted and painted with two coats of synthetic emamel paint of smoke grey color over a coat of primer rest all as specified on drg and as directed. |
| 50 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. Complete Internal surface of Locker steel with shelves shall be painted with two coats of smoke grey color paint over a coat of red oxide complete all as specified and as directed. |
| 51 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required. External / Outer Surface of Locker Steel shall be painted two coats of Silver hammer tone paint over a coat of red oxide complete all as specified and as directed. |
| 52 | 7. Table dining ORs Aluminium Top steel (FD-165) |
| 53 | S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed.(a) Leg/stiffener of MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion with two coats of smoke grey paint over a coat of red oxide primer. |
| 54 | (b) Table top made of 18mm thick BWR plywood as per existing shape and size of Make- Archidply/Century Ply /Greenply covered with 0.80 mm thick Aluminium Sheet all around . |
| 55 | Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying two coat of synthetic enamel paint of smoke grey shade over a coat of red oxide primer, rest all as directed. |
| 56 | S & F new PVC shoe |
| 57 | 8. Table office officer/clerk steel (FD-84/1003,1004 ) |
| 58 | S & F following components of Table office officer/clerk steel including dismantling unservicable one all as specified and as directed.(a) Drawer made of 1mm CRCA sheet including painting with two coats of synthetic enamel paint of silver hammer tone shade over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system. |
| 59 | (b) Leg/stiffener of MS square pipe duly welded to the frame and painted with two coats of synthetic enamel silver hammer tone shade paint over a coat of primer. |
| 60 | S & F new Lock of 6 levers with duplicate keys of Make-Godrej/Link/Hettich/Harrison |
| 61 | Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of silver hammer tone shade over a coat of primer both inside and outside including preparation of surfaces. |
| 62 | S&F in repairs top of Table office officer steel top with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed by Engr-in-Charge. |
| 63 | S&F in repairs top of Table office clerk steel top with 18 mm thick Prelaminated MDF board exterior grade duly post formed in Mohigini/Walnut colour/shade,as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on all sides with strong bonded chemical adhesive, rest all as shown on drg and as directed by Engr-in-Charge. |
| 64 | S & F new PVC shoe |
| 65 | Preparation of old painted steel sufaces of Table Office Officer Steel by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of silver hammer tone shade paint both inside and outside complete all as specified and as directed. |
| 66 | Preparation of old painted steel sufaces of Table Office Clerk Steel by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of silver hammer tone shade paint both inside and outside complete all as specified and as directed. |
| 67 | 9. Bed Hard Steel (FD/E6/MAP/08® |
| 68 | Removing of old U/S and broken existing 12mm thick commercial plywood from Bed Hard Steel PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply /Century Ply/Greenply fixed to charpoy IP Steel PlyTop with suitable size of steel nut & bolt with washer rest all as per drg and as directed. |
| 69 | S&F in repairs to head board of size 635 mm X 200 mm made from 18mm thick pre-laminated MDF board exterior grade both side decorative finish shade as approved complete including removal of damaged head board all as specified on drawing or as directed. |
| 70 | S&F in repairs to foot board of size 635 mm X 300 mm made from 18mm thick pre-laminated MDF board exterior grade both side decorative finish, shade as approved complete including removal of damaged foot board all as specified on drawing or as directed. |
| 71 | S & F Hard rubber shoes as per drg and as directed by Engr-in-Charge. |
| 72 | 10. Book Case steel (FD-1028) |
| 73 | S&F pane glasses of required shape and size 3 mm thick for Book case steel complete including removal of broken pane glasses all as specified on drg and as directed by Engr-in-Charge. |
| 74 | Taking out of old unserviceable handle of book case steel & S&F new CP handle cast iron/zinc CP coated of Godrej pattern with new nut and bolts complete all as shown on drg and directed. |
| 75 | Taking out of old unserviceable locks of book case steel and S&F new locks of 40mm six lever of special type brass with new nuts and bolts key complete all as per drawing and directed. |
| 76 | 11. Table Bed Side Steel (FD-157(M) |
| 77 | S & F following components of Table Bed Side Steel 600x380x760mm including dismantling unservicable one all as specified and as directed.(a) Top pre-laminated MDF board 18 mm thick one side teak shade and other side white shade and 2 mm PVC beading all round the top complete all as specified. |
| 78 | (b) PVC shoe |
| 79 | Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of silver hammer tone synthetic enamel paint complete all as specified. |
| 80 | 12. Chair Verandah (FD-359, FD-256 OR Similar pattern) |
| 81 | (a) Conduit section any member made of MS conduit pipe 16 guage, 19mm dia as per drg. |
| 82 | (b) Hard rubber shoe as per drg |
| 83 | (c) Removing old u/s cane from chair verandah and re-caning the chairs etc with approved new plastic cane 4 mm wide half round as per matt pattern of color as approved by Engg-in - charge. |
| 84 | (d) Repair of welding of joints as per drg. |
| 85 | 13. Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green, rest all as shown on drg and as directed by Engr-in-Charge.( FD-255, 383 FD-1028) |
| 86 | Book Case Steel |
| 87 | Teapoy verandah |
| 88 | chair verandah |
| 89 | Bed Hard Steel |
| 90 | 14. TABLE DRESSING LADIES WITH MIRROR (FD-32,251,378) |
| 91 | (a) S & F in repair for top of Table dressing made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 92 | S&F 5.5mm thick electro copper plated Mirror of polished sheet glass looking mirror of size 1220x380mm with Ist class hard wood teak frame complete all as specified and directed. |
| 93 | S&F Mirror frame with Ist class hard wood teak edging including back ply 6mm thick complete all as specified &directed. |
| 94 | S&F in replacement of unserviceable drawer with materials, sizes & telescopic channel as specified as per drawing complete with new chromium plated handles of 100mm long and fixing and finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed. |
| 95 | 15. TABLE DRESSING GENTS WITH MIRROR ( FD-31,230,379) |
| 96 | (a) S & F in repair for top of Table dressing made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 97 | S&F 5.5mm thick electro copper plated mirror of polished sheet glass looking mirror of size 760x380mm complete all as specified and directed. |
| 98 | S&F Mirror frame with Ist class hard wood teak edging including back ply 6mm thick complete all as specified &directed. |
| 99 | S&F in replacement of unserviceable drawer with materials & telescopic channel with new chromium plated handles of 100mm long and fixing and finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed. |
| 100 | 16. HAT STAND WITH MIRROR SMALL/LARGE (FD-206,233,362) |
| 101 | S&F 5mm thick belevelled edge looking mirror of size 440x300mm with 20x50mm wooden beading complete all as shown on drawing and directed. |
| 102 | S&F brass peg overall size 120x75mm with brass screw complete all as shown on drawing and directed. |
| 103 | S&F of 6mm thick comercial plywood to back side of hat stand small complete all as shown on drawing and directed. |
| 104 | 17. LOCKER BED SIDE WOODEN (FD-54, FD-222) |
| 105 | S & F both door shutter of bed side locker wooden made of 18/19mm thick pre-lammited particle board exterior grade one side teak face duly covered with 4mm thick 1st class hardwood (TEAK) beading(Both door of locker shall be counted as single unit). |
| 106 | S & F 25 mm dia aluminium hanging rod with one pair of fixing bracket |
| 107 | S & F 6 mm thick plywood commercial type to back side of locker |
| 108 | S & F one No. 75 mm long aluminium hasp and staple and one No. 75 mm long aluminium handle |
| 109 | 18. TABLE 900x600x760mm WITH OR WITHOUT DRAWER (FD-41,224,283,284,223,42) |
| 110 | S&F table top 900x600mm made of pre-laminated particle board 18 / 19 mm thick exterior grade of desired designs & shades as approved by GE duly covered with hard (machine) pressed PVC beading all round the top duly polished as in replacement of unserviceable / broken top complete all as specified, shown on drawing and directed. |
| 111 | S&F leg of table made of Ist class hard wood ( Teak wood) of size and shape/ pattern as in replacement of unservicable/broken leg complete all as specified, shown on drawing and directed. |
| 112 | S&F drawer including new chromium plated handles of 100 mm long of size & telescopic channel, shape/pattern as in replacement of unserviceable /broken drawer complete all as specified, shown on drawing and directed. |
| 113 | 19. Chair dining (FD-16, 203, 279) |
| 114 | (a) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 115 | (b) Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 116 | (c) Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge. |
| 117 | (d) Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 118 | (e) Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 119 | (f) Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 120 | (g) Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge. |
| 121 | 20. Chair writing (FD-20, 202 , 280 ) |
| 122 | (a) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 123 | (b) Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 124 | (c) Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge. |
| 125 | (d) Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 126 | (e) Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 127 | (f) Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 128 | (g) Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge. |
| 129 | (h) Recaning of repaired chair writing with best quality of approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge. |
| 130 | 21. CHAIR EASY (FD-17, 201, 229) |
| 131 | (a) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 132 | (b) Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 133 | (c) Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge. |
| 134 | (d) Removing the existing unserviceable front frame and providing new teak wood front frame including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge. |
| 135 | (e) Removing the existing unserviceable front/back rail and providing new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge. |
| 136 | (f) Removing the existing unserviceable side rails and providing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge. |
| 137 | (g) Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed by Engineer-in-charge. |
| 138 | 22.. CHAIR WOODEN BOTTOM WITHOUT ARMS (FD-56, 225, 285) |
| 139 | (a) Removing of existing unserviceable seat and provide new seat made out of 6mm thick plywood commercial to Chair wooden bottom with wood/steel screws, rest all as specified on drawing or as directed by Engineer-in-charge. |
| 140 | (b) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 141 | (c) Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge. |
| 142 | (d) Removing the existing unserviceable side rails and fixing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge. |
| 143 | (e) Removing the existing unserviceable front rail and fixing new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge. |
| 144 | (f) Removing the existing unserviceable rear rail fixing new teak wood rear rail complete all as specified on drawing or as directed by Engineer-in-charge. |
| 145 | (g) Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge. |
| 146 | 23. COMMON FOR ALL CHAIRS |
| 147 | (a) Removing the existing unserviceable stiffeners and providing new stiffners made out of 1st class seasoned teak wood stiffeners complete all as specified on drawing or as directed by Engineer-in-charge. |
| 148 | 24. Table dining 8 persons (FD-30, 239, 273 ,376) |
| 149 | (a) Replacement of existing unserviceable table top for Table dining 8 persons made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 150 | (b) S&F in repairs to unserviceable damaged legs from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 151 | (c) S&F in repairs to unserviceable damaged side short rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 152 | (d) S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 153 | 25. Table dining 6 persons (FD-30, 239, 273) |
| 154 | (a) Replacement of existing unserviceable table top for Table dining 8 persons made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 155 | (b) S&F in repairs to unserviceable damaged legs from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 156 | (c) S&F in repairs to unserviceable damaged side short rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 157 | (d) S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 158 | 26. Common for Table dining 8/6 persons |
| 159 | a) S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 160 | 27. Teapoy ( FD-34, 232, 278, 382) : |
| 161 | (a) Replacement of existing unserviceable table top for teapoy made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 162 | (b) S&F in repairs to unserviceable damaged legs from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 163 | (c) S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 164 | 28. Table Centre (FD-29, 235) |
| 165 | (a) Replacement of existing unserviceable table top for Table centre made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 166 | (b) S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 167 | (c) S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 168 | 29. Table Writing/Medium/Study (FD-33, 249, 275 or similar): |
| 169 | (a) Replacement of existing unserviceable table top for Table writing made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 170 | (b) Legs as per drg |
| 171 | (c) Foot rest as per drg |
| 172 | (d) Stiffener as per drg |
| 173 | (e) Sides of cabinet with 18mm thick particle board with 0.6 mm thick laminates as per drg |
| 174 | (f) 18mm thick particle board with 0.6 mm thick laminates Cabiner door & drawer along with locking arrangement and handles as per drg |
| 175 | 30. TABLE PEG (FD-25, 80, 236, 277, 384 |
| 176 | (a) Replacement of existing unserviceable table top for Table peg made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 177 | (b) S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 178 | (c) S&F in repairs to unserviceable damaged top rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 179 | (d) S&F in repairs to unserviceable damaged bottom rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 180 | 31. TABLE BED SIDE (WOODEN) (FD-210, 248, 276) |
| 181 | (a) Taking out old ply from the back of table bed side and S&F new back ply 6mm thick commercial BWP ISI mark of the same shape and size of the existing table bed side aqll as specified and directed. |
| 182 | (a) Replacement of existing unserviceable top for Table bed side made out of MDF board with 0.6mm thick laminates in color/shade as approved by Engg-in-charge with 2mm thick PVC edging fixed on sides with strong bonded chemical adhesive through hot pressed machine complete as per drg. |
| 183 | (c) Opening out old unserviceable shelf and S&F new shelf made out of 12 mm thick ply wood commercial BWP ISI mark of size and shape including 4mm thick teak wood beading all round all as specified and directed. |
| 184 | 32. SOFA SET 1/2/3/4/5 SEATER WITH CUSHION |
| 185 | S&F leg 70x35x510mm of 1st class hard wood ( Teak wood) of size & shape/ pattern as in replacement of unserviceable /broken leg complete all as specified, shown on drawing and directed. |
| 186 | All as per item No 32 here in before but 100x35x1620mm front/rear rail (3 seater) complete all as specified, shown on drawing directed. |
| 187 | All as per item No 32 here in before but front/rear rail (single seater) complete all as specified, shown on drawing directed. |
| 188 | All as per item No 32 here in before but 100x35x615mm side rail complete all as specified, shown on drawing directed. |
| 189 | All as per item No 32 here in before but 75x35x725mm arm rest complete all as specified,shown on drawing and directed. |
| 190 | All as per item No 32 here in before but 20x50x725 battens complete all as specified, shown on drawing directed. |
| 191 | S&F cushion of 40 density cool foam of size 560x 530x100mm thick complete all as specified and as directed. Make: sleepwell/Feather foam duly covered with new tapestry cloth of approved shade & quality with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 560x530x100mm thick complete including painting of sofa sets all specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs.400/- per metre. |
| 192 | 33. M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:- |
| 193 | (a) Bed Ply top ( FD-214,246) |
| 194 | (b) Chair dining (FD-16, 203, 279) |
| 195 | (c) Chair writing (FD-20, 202, 280) |
| 196 | (d) Chair Easy (FD-17, 201, 229) |
| 197 | (e) Chair wooden bottom without arm (FD-56, 225,285) |
| 198 | (f) Stool Dressing (FD-27, 252) |
| 199 | (g) Table dining 6/8 persons (FD-30, 239,273, 376) |
| 200 | (h) Teapoy (FD-34, 232, 278, 382) |
| 201 | (j) Table centre (FD-29, 235) |
| 202 | (k) Table writing (FD-33, 275) |
| 203 | (l) Peg Table (FD-274, 375) |
| 204 | (m) Table bed side (FD-210, 248, 276) |
| 205 | 34. Chair Dining Cushioned (FD/E6/MAP/10 (R)& Long back TP) |
| 206 | S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Rear leg duly curved as per existing leg |
| 207 | (b) Front leg |
| 208 | (c) Side/back/front rails |
| 209 | (d) Stiffener/duly Curved back rests as per exisitng drg |
| 210 | (e) Providing new Cushion of appropriate size of 40 density PU foam complete with dismantling old one as per sample held with GE Make- Sleepwell, Model-Primo Cool/Godrej. |
| 211 | (f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling old one. |
| 212 | M & L for fixing of PVC shoes nylon buffers superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender