Tender For Maintenance And Repair/ Replacement To Certain Steel Furniture Under (East) Bareilly
Tender Value
65.48 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair/ Replacement To Certain Steel Furniture Under (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work : MAINT AND REPAIR/ REPLACEMENT TO CERTAIN STEEL FURNITURE UNDER (EAST) BAREILLY Contract No :CWE BLY/ GE(E)/ 84 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Tepoy Verandah Drg No. FD/E6/MAP/17 S & F of the following components of tepoy varandah including dismantling of old unservicable one complete all as specified, directed and as shown on drawing: - |
| 3 | (a) Prelaminated particle board exterior grade 18 mm thick as approved by Eng-in-Charge with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. |
| 4 | (b) Mild steel flat iron of size 25mm x 3mm thick.(03 Nos set) |
| 5 | (c) PVC shoes. |
| 6 | Chair Verandah Drg No. FD-359 S & F of the following components of chair verandah including dismantling of old unservicable one complete all as specified, directed: |
| 7 | (a) Removing of old unsv cane and recaning both seat and back with new plastic cane, white, half round of size 4 mm wide of approved quality. |
| 8 | (b) PVC shoes. |
| 9 | Chair Writing Steel Drg No. FD/E6/MAP/12 pattern:S & F of the following components of chair writing steel (approved quality) including dismantling of old unserviceable one complete all as specified and directed. |
| 10 | (a) Replacement of old /unserviceable seat and back both complete of various chair made with12mm thick hot pressed plywood covered with 50mm thik & 50-55 density polyurethene foam cushined with best quaility fabric as approved & PVC lipping allround the seat & back shape & size as per specifified & shown in drawing & directed. |
| 11 | (b) Replacement of Arms rest of chair writing S&F new arm rest made of polyurethene, black integrated scratch & weather proof skin with MS insert as per sample complete. |
| 12 | Book Case Steel Drg No. FD-1028 S & F of the following components of book case steel including dismantling of old unserviceable one complete all as specified and directed: - |
| 13 | (a) Removing of existing old unsv1.25 mm thick mild steel channel and replace new channel as per drg and directed by Engr-in-charge. |
| 14 | (b) Removing of existing old unsv Iron cleat stoper 20 mm X 10mm and replace new Iron cleat stoper 20mm X 10mm as per drg and directed by Engr-in-charge. |
| 15 | (c) Removing of existing old unsv 3 mm thick plain glass and replace new 3 mm thick plain glass as per drg and directed by Engr-in-charge. |
| 16 | Chair School Hand Board Drg No. FD/E6/MAP/05 S & F of the following components of chair school hand board having original pattern of different make and model including dismantling of old unserviceable one complete all as specified and directed: - |
| 17 | (a) Hand board made of 18 mm thick prelaminated MDF board exterior grade in colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. |
| 18 | (b) PVC Frame (Seat & Back) as per existing pattern. |
| 19 | (c) PVC shoes. |
| 20 | Table Bed Side Drg No. FD/E6/MAP/15 RS & F of the following components of table bed side including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 21 | (a) Top made of 18 mm thick prelaminated MDF board exterior grade of colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. |
| 22 | (b) Removing of existing old unsv Small drawer with telescopic channel and replacement of new Small drawer with telescopic channel as per drg and directed by Engr-in-charge. |
| 23 | (c) Removing of existing old unsv Large drawer with telescopic channel and replacement of new Large drawer with telescopic channe as per drg and directed by Engr-in-charge. |
| 24 | (d) Removing of existing old unsv CP Handle size 75 mm and replacement of ment of CP Handle size 75 mm as per drg and directed by Engr-in-charge. |
| 25 | (e) Removing of existing old unsv Side made of 18mm thick Prelaminated MDF Board exterior gradeand and replacement of new Side made of 18mm thick Prelaminated MDF Board exterior gradeand as per drg and directed by Engr-in-charge. |
| 26 | (f) PVC shoes. |
| 27 | Rack Shoe Steel Drg No. FD/E6/MAP/02(R) S & F of the following components of rack shoe steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 28 | (a) Removing of existing old unsv 25 mm dia mild steel pipe for main frame and replacement of new 25 mm dia mild steel pipe for main frame as per drg and directed by Engr-in-charge. |
| 29 | (b) 700x300mm size frame of welded wire mesh made of 3 mm dia mild steel wire consisting of 9 rows in one side and 3 rows in other side as per drawing. |
| 30 | (c) PVC shoes. |
| 31 | Chair Steel Tubular With Arms Drg No. FD-75 S & F of the following components of chair steel tubular with / without arms made of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screws 7.5 cm long (4 Nos. duly fitted with one nut and one washer) to fixed the chair frame complete all as specified, directed and shown on drawings including dismantling of old unservicable one: - |
| 32 | (a) Removing of existing old unsv Seat frame and replace of new Seat frame as per drg and directed by Engr-in-charge. |
| 33 | (b) Removing of existing old unsv Back frame and replacement of new Back frame as per drg and directed by Engr-in-charge. |
| 34 | (c) Removing of existing old unsv Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size and replacement of newHandle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size as per drg and directed by Engr-in-charge. |
| 35 | (d)Removing of existing old unsv 50 mm long flat iron piece made of 25 X 4 mm flat duly welded at four corner of seat and back to support and screwed with the seat at two places and replacement of new 50 mm long flat iron piece made of 25 X 4 mm flat duly welded at four corner of seat and back to support and screwed with the seat at two placesas per drg and directed by Engr-in-charge. |
| 36 | (e) PVC rubber cap on back of chair frame where ever required at the top of frame. |
| 37 | Bed Hard Steel Drg No. FD/E6/MAP/08 RS & F of the following components of bed hard steel including dismantling of old unservicable one complete all as specified, directed and shown on drawing: - |
| 38 | (a) 12 mm thick BWP grade plywood of on top of the bed with suitable screws. |
| 39 | (b) Head board made of 18 mm thick prelaminated MDF board including 04 mm thick PVC beading as per drawing. |
| 40 | (c) Foot board made of 18 mm thick prelaminated MDF board including 04mm thick PVC beading as per drawing. |
| 41 | (d) PVC shoes. |
| 42 | Table Office Clerk Steel Drg No. 1004 S & F of the following components of table office officer/clerk steel including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: |
| 43 | (a) Removing of existing old unsv Drawer made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge and replacement of new Drawer made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge |
| 44 | (b) Removing of existing old unsv Lock 6 lever with duplicate keys and replacement of new Lock 6 lever with duplicate keys as per drg and directed by Engr-in-charge. |
| 45 | (c) Removing of existing old unsv Side panel made of 1 mm thick mild steel sheet and replacement of new Side panel made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 46 | (d) Prelaminated particle board exterior grade 18 mm thick as approved by Eng-in-Charge with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. |
| 47 | (e) PVC shoe. |
| 48 | Almirah Steel Medium Drg No. 1032 S & F of the following components of almirah steel medium including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: - |
| 49 | (a) Removing of existing old unsv Lock 6 lever with duplicate keys and replace new Lock 6 lever with duplicate keys as per drg and directed by Engr-in-charge. |
| 50 | (b) Removing of existing old unsv CP handle 100 mm size. and replace new CP handle 100 mm size as per drg and directed by Engr-in-charge. |
| 51 | (c) Removing of existing old unsv 3 way locking device and replace new 3 way locking device as per drg and directed by Engr-in-charge. |
| 52 | (d) Removing of existing old unsv Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed and replace new Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed as per drg and directed by Engr-in-charge. |
| 53 | (e) Removing of existing old unsv Door shutters made of 1 mm thick mild steel sheet and replace new Door shutters made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 54 | (f) Removing of existing old Shelves made of 1 mm thick mild steel sheet and replace new Shelves made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 55 | Almirah Steel Large Drg No. FD- 1031 S & F of the following components of Almirah steel large including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 56 | (a) Removing of existing old Lock 6 lever with duplicate key sand replace new Lock 6 lever with duplicate keys as per drg and directed by Engr-in-charge. |
| 57 | (b) Removing of existing old CP handle 100 mm size and replace new CP handle 100 mm size as per drg and directed by Engr-in-charge. |
| 58 | (c) Removing of existing old 3 way locking device and replacement new 3 way locking device as per drg and directed by Engr-in-charge. |
| 59 | (d) Removing of existing old Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed and replacement new Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed as per drg and directed by Engr-in-charge. |
| 60 | (e) Removing of existing old Door shutters made of 1 mm thick mild steel sheet and replacement new Door shutters made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 61 | (f) Removing of existing old Shelves made of 1 mm thick mild steel sheet and replacement new Shelves made of 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 62 | Locker Steel Drg No.1029 S & F of the following components of locker steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 63 | (a) Removing of existing old CP 'D' type Handle 100 mm and replacement new size and replacement new CP 'D' type Handle 100 mm size as per drg and directed by Engr-in-charge. |
| 64 | (b) Removing of existing old CP Hasp and staple 75 mm size and replacement new CP Hasp and staple 75 mm size as per drg and directed by Engr-in-charge. |
| 65 | (c) Removing of existing old CP hanging rod 20 mm dia and replacement new CP hanging rod 20 mm dia as per drg and directed by Engr-in-charge. |
| 66 | (d) Removing of existing old Leg made of 1 mm thick mild steel sheet duly welded/riveted and replacement new Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed as per drg and directed by Engr-in-charge. |
| 67 | (e) Removing of existing old Door shutter made of 1 mm thick mild steel sheet and replacement new 1 mm thick mild steel sheet as per drg and directed by Engr-in-charge. |
| 68 | Table Computer MAP Drg No. FD/E6/MAP/03S & F of the following components of table computer MAP/TP including dismantling of old unservicable one copllete all as specified, directed and shown on drawings. |
| 69 | (a) Prelaminated particle board exterior grade 18 mm thick as approved by Eng-in-Charge with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. |
| 70 | (b) Shelves/bottom made of 18 mm thick prelaminated MDF board exterior grade ISI marked in colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. |
| 71 | (c) Removing of existing old Drawer with telescopic channel and replacement of new Drawer with telescopic channel as drg and directed by Engr-in-charge. |
| 72 | (d) Removing of existing old Pull out tray with telescopic channel and replacement of new Pull out tray with telescopic channel as drg and directed by Engr-in-charge. |
| 73 | (e) Removing of existing old CP Drawer knob and replacement of new CP Drawer knob as drg and directed by Engr-in-charge. |
| 74 | (f) Removing of existing old side of table and replacement of new Side of table as per drg and directed by Engr-in-charge. |
| 75 | (g) PVC shoes. |
| 76 | Chair Trade Pattern (Revolving High/Medium Back/ Computer) |
| 77 | (a) Material & Labour for re-upholstering of seat and back with new tapestry cloth of approved quality including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. |
| 78 | (f) Removing of existing old Side of table B79r and replacement of new Side of table B79r as drg and directed by Engr-in-charge. |
| 79 | (c) S&F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. |
| 80 | (d) S&F of handle of chair (PU Soft) of suitable size and design as per original pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. |
| 81 | (e) S&F of suitable castor wheel to chairs revolving as per original Pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. |
| 82 | Table Dinning ORs Steel Drg No. FD-165 (R) S & F of the following components of table dinning ORs steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 83 | (a) Removing of existing old Table top made of 19 mm thick Block board with 22 mm gauge aluminium sheet and replacement new Table top made of 19 mm thick Block board with 22 mm gauge aluminium sheet |
| 84 | (b) PVC shoe. |
| 85 | Table 3'x2' with Drawer Drg No. FD-1008 : S & F of the following components of table 3'x2' with drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 86 | (a) Prelaminated particle board exterior grade 18 mm thick as approved by Eng-in-Charge with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. |
| 87 | (b) Removing of existing old Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick and replacement new Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg and directed by Engr-in-charge. |
| 88 | (c) Removing of existing old Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick and replacement new Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg and directed by Engr-in-charge. |
| 89 | (d) Removing of existing old Long rail/siffner of conduit pipe 25 mm 1.6 mm thick and replacement new Long rail/siffner of conduit pipe 25 mm 1.6 mm thick as per drg and directed by Engr-in-charge. |
| 90 | (e) Removing of existing old Lock 6 lever with duplicate keys and replacement new Lock 6 lever with duplicate keys as per drg and directed by Engr-in-charge. |
| 91 | (f) Removing of existing old Drawers made out of 1mm thick MS sheet and replacement of new Drawers made out of 1mm thick MS sheet as drg and directed by Engr-in-charge. |
| 92 | (g) PVC/Hard rubber shoes. |
| 93 | Table 3'x2' without Drawer Drg No. FD-1007 S & F of the following components of table 3'x2' without drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 94 | (a) Prelaminated particle board exterior grade 18 mm thick as approved by Eng-in-Charge with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. |
| 95 | (b) Removing of existing old Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick and replacement new Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg and directed by Engr-in-charge as drg and directed by Engr-in-charge. |
| 96 | (c) Removing of existing old Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick and replacement new Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick |
| 97 | (d) Removing of existing old Long rail/siffner of conduit pipe 25 mm 1.6 mm thick Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick and replacement of new Long rail/siffner of conduit pipe 25 mm 1.6 mm thick Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as drg and directed by Engr-in-charge. |
| 98 | (e) PVC/Hard rubber shoes. |
| 99 | Charpoy GI Pipe Drg No. FD-220 S & F of the following components of charpoy GI pipe including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 100 | (a) Removing of existing old Long rail made of 32 mm bore GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm size GI elbow and replacement of new Long rail made of 32 mm bore GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm size GI elbow as drg and directed by Engr-in-charge. |
| 101 | (b) Removing of existing old Conversion of 32 mm bore long rail obtained from dismantling of item No. 19.01 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow and replacement of Conversion of 32 mm bore long rail obtained from dismantling of item No. 19.01 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow as drg and directed by Engr-in-charge. |
| 102 | (c) Conversion of 32 mm bore short rail obtained from dismantling of item No. 19.02 above into two number legs including fixing to 3 way 32 mm dia at one end threaded and cover the other end with hard rubber / PVC shoe as drg and directed by Engr-in-charge. |
| 103 | (d) Removing of existing old Check nuts of 32 mm dia and replacement of new Check nuts of 32 mm dia as per drg and directed by Engr-in-charge.. |
| 104 | (e) Removing of existing old 3 way 32 mm dia GI elbow ISI marked and replacement of new 3 way 32 mm dia GI elbow ISI marked as drg and directed by Engr-in-charge. |
| 105 | (f) 12 mm thick BWR grade ISI marked plywood of Make Archid/Century/Greenply of size 2000 mm x 900 mm including providing 50 mm wide strip made out of 6 mm thick plywood for filling gap between plywood sheet and short rails including replacement of nut-bolts as required for fixing of plywood. |
| 106 | (g) Mild steel flat iron of size 40x4 mm, length suitable to connect both long rails to support ply top with two Nos. Nut-bolts and double washers. |
| 107 | Charpoy IP with Hard Top Drg No. FD/MAP-II/01 S & F of the following components of charpoy IP with hard top (MAP) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - |
| 108 | (a) Leg 440 mm high, made of 32 mm X 32 mm square mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. |
| 109 | (b) Long rail 1916 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. |
| 110 | (c) Short rail 836 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. |
| 111 | (d) Stiffner any type 836 mm long, made of 25 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. |
| 112 | (e) Mild steel clip of size 60 X 25 X 6 mm, made to shape as required, fixed duly welded to frame of charpoy. |
| 113 | (f) 12 mm thick BWP grade ISI marked plywood of Make Archid/Century/Greenply of size 1916 mm X 836 mm, fixed with 10 Nos nut-bolts of size as required and directed. |
| 114 | M & L for running gas or electric welding as per site requirement, to make good the loose joints complete all as specified and directed. |
| 115 | M & L for preparation of the following old painted steel furniture articles of any description and in any position, filling cavities with necessary putty or other fillars to achieve even and smooth suface and applying one coat of synthetic enamel paint including primer to achive surface even and smooth in glossy finish complete all as specified and as directed: - NOTES: - (i) Painting work shall be carried out all around on the complete exposed surface including internal parts like shelves, drawers, stiffners, partions etc. with spray painting process. (ii) Newly replaced parts shall be treated with one coat of red oxide primer before painting work and cost of the same deemed included in the unit rate of these items.(iii) Cost of removing of all dent and correcting of deshaped profiles shall deemed to be included in the unit rate of these items. (iv) Surface and site shall be made neat and clean by the contractor. (v) Work shall be carried out within the area of GE (East) Bareilly, Furniture yard of BSO as per direction of the Engineer-in-Charge. |
| 116 | Teapoy verandah steel FD/E6/MAP/17 |
| 117 | Chair verandah steel FD-359 |
| 118 | Chair writing steel (FD/E6/MAP/12) |
| 119 | Book case steel FD-1028 |
| 120 | Chair school hand board (FD/E6/MAP/05) |
| 121 | Table bed side (FD/E6/MAP/15) |
| 122 | Rack shoe steel FD-E6/MAP/02(R) |
| 123 | Chair steel tubular with arms FD-75 |
| 124 | Bed hard steel (FD/E6/MAP/08) |
| 125 | Table office clerks steel FD-1004 |
| 126 | Almirah steel medium with shelves FD-1032 |
| 127 | Almirah steel large with shelves FD-1031 |
| 128 | Locker steel FD-1029 |
| 129 | Table dinning ORs FD-165(R) |
| 130 | Table 3'x2' with drawer (FD-1008) |
| 131 | Table 3'x2' without drawer (FD-1007) |
| 132 | Charpoy GI pipe (FD-220) |
| 133 | Charpoy IP with hard top MAP (FD/MAP-II/01) Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender