Tender For special Repair To Bldg No P-129 (Guard Room) Of 110 Inf Bn (Ta) Madras At Sector Ii And Addition/Alteration In Bldg No P-242 (Guard Room) Of 13 Army Dog Unit At Haft Chinar Mil Stn Under Ge 970 Ews
Tender Value
28.73 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
16 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-129 (Guard Room) Of 110 Inf Bn (Ta) Madras At Sector Ii And Addition/Alteration In Bldg No P-242 (Guard Room) Of 13 Army Dog Unit At Haft Chinar Mil Stn Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as per specified and directed. |
| 2 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified and directed. |
| 3 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 4 | M&L for 6mm verneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards of an description complete all as specified and directed by Engr-in-charge |
| 5 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water all as specified and directed. |
| 6 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @2% by weight of cement and finished surface even and smooth without using extra cement including necessary scaffolding etc all as specified and directed. Note : WPC measured & paid seprately. |
| 7 | Supply only WPC, complete all as specified and directed. |
| 8 | M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed by Engr-in-Charge all as specified and directed. |
| 9 | M&L 15mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement all as specified and directed. |
| 10 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 2mm thick wall care putty in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and directed. |
| 11 | Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer all as specified and directed. |
| 12 | Taking down chowkat or frames exc 1.5 Sqm but n exc 4.0 Sqm Each with shutter (without taking off shutters from the frame) all as specified and directed. |
| 13 | Taking down Chowkats or frames not exc. 1.5 sq. m Each with shutters (without taking off shutters from the frames) all as specified and directed. |
| 14 | S&F 2nd class hardwood Plain, solid, straight, chowkat or Frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 15 | S&F 30mm thick, 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge |
| 16 | S&F for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to Each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101mmx44mmx3mm thick (b) Shutter top 80mmx44mmx3mm thick. (c) Shutter bottom 110mmx44mmx3mm thick (d) Shutter vertical 80mmx44mmx3mm thick (e) Shutter middle 80mmx44mmx3mm thick. (f) Gauging clip weighing not less than 0.097kg/metre Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane shall be measured and paid separately. |
| 17 | S&F for aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per Each open able leaf shall be provided. Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. |
| 18 | M&L for ACP board for fixing in aluminium partition and doors complete all as specified and as directed. |
| 19 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 20 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site as per specification & drawing all as specified and directed. |
| 21 | S&F in stainless steel Butt hinges 100mm size, medium weight all as specified and directed. |
| 22 | S&F in extruded Aluminium alloy handles 150mm size, cast type, anodised all as specified and directed. |
| 23 | S&F in Aluminium, anodised, barrel tower bolts 150mm long of extruded section all as specified and directed. |
| 24 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionS&Fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, all as specified and directed. |
| 25 | S&F figured glass, pin head type and glazing with oil putty in squares 4 mm thick, n.exc 0.5 Sqm in Each panel as in ventilator all as specified and directed. |
| 26 | S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples all as specified and directed. |
| 27 | S&F 20mm bore mild steel chromium plated curtain rods, suitable for door/windows curtain with incl necessary fancy type dooms as approved by GE, and fitted to Each end, brackets and fixed to wall complete all as specified and directed. |
| 28 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises all as specified and directed. |
| 29 | M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) all as specified and directed. |
| 30 | All as item No 29 above but as in skirting over 10 mm thick screed in CM (1:4) all as specified and directed. |
| 31 | M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed. |
| 32 | All as per item No 31.00 above, but as in skirting over 10 mm thick screed in CM (1:4) all as specified and directed. |
| 33 | M&L coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 34 | M&L johnson endura paving coloured tiles of technocommercial equivalent of size 300mmx300mmx8-10mm/ 400MMx400MMx8-10mm set and jointed in neat cement slurry pointed with white or coloured cement laid over and incl 15mm thick screed bed built in CM (1:4) after demolition old floor hearth or wall tiling complete all as specified & directed. |
| 35 | S&F in repairs Vitreous china squatting pan Orrisa pattern white/coloured of size 580x440mm with integral foot rest with P or S trap excluding flushing cistern and flush pipe complete all as specified and as directed. |
| 36 | S&F in repair PVC 10 ltrs capacity low level flushing cistern complete set including flush pipe all as specified and directed. |
| 37 | S&F in repair vitreous china wash basin, white flat back size 550x 400 mm incl. brackets ,cutting for pinning in ends of brackets as fixed all as specified and directed. |
| 38 | S&F in repair vitreous china Urinal, Half stall type,(580 x 380 x350 mm min) white(excluding flushing cistern and flush pipe) fixed all as specified and directed. |
| 39 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) all as specified and directed. |
| 40 | S&F in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and as directed. |
| 41 | S&F in repairs PVC waste pipe 50mm dia for urinal complete all as specified and as directed . |
| 42 | S&F in repair 600 x 450 mm bevelled edge mirror or alu/metal frame of selected quality glass mounted on 6 mm thick AC bldg board fixed with wooden plug with chromium plated brass screw and cup washer all as specified and directed. |
| 43 | S&F for shower arm 15mm size, 195mm long with bend of 45 degreee with flange of PTMT any colour. (min. weight 40 gms) all as specified and directed. |
| 44 | S&F in repair brass chromium plated wall mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed. |
| 45 | S&F in repair Grating doom 100 mm dia of PTMT (min. weight 25 gms) all as specified and directed. |
| 46 | S&F in repair soap dish brass chromium plated fixed to wall with brass choRM ium plated screw and plastic plug etc. completed all as specified and directed. |
| 47 | S&F in repair for Rotational moulded polyethylene 1000Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position all as specified and directed |
| 48 | S&F in repair Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe & fixed. (min weight 15mm-142 gms) all as specified and directed. |
| 49 | S&F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 50 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 51 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 52 | M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed mineral wool preformed `SNAP ON' pipe secions of density 144 Kg/Cum conforming to IS 9842 on pipe of internal dia 20 mm all as specified and directed. |
| 53 | M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 54 | M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 55 | Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 56 | S&F in repair 15mm bib tap chromium plated with crutch or butterfly handle screwed for iron pipe complete all as specified and directed. |
| 57 | S&F in repair brass chromium plated wash basin/Piller mixer for mixing Hot & cold water, high pressure, screwed down for 15 mm bore iron pipe fixed complete all as specified and directed. |
| 58 | S&F in repair 15mm stop valve angular type cromium plated fancy type , screwed down , high pressure, with crutch or butterfly handles complete all as specified and directed. |
| 59 | S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm all as specified and directed. |
| 60 | S&F Towel rail 600mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) all as specified and directed. |
| 61 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 62 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 63 | All as per item No 62.00 above, but 75mm dia all as specified and directed. |
| 64 | S&F 110 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed. |
| 65 | S&F 75 mm dia PVC (SWR) branch piece, double, (double Y) equal or unequal all as specified and directed. |
| 66 | S&F 110 mm dia PVC (SWR) bend any radius all as specified and directed. |
| 67 | All as per item 66 above but 75mm dia all as specified and directed. |
| 68 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia provided with eccess door all as specified and directed. |
| 69 | All as per item No 68.00 above, but 75mm dia all as specified and directed. |
| 70 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed. |
| 71 | S&F 110 mm dia PVC (SWR) vent cowl all as specified and directed. |
| 72 | M&L Concrete bed to 100mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D2 using 40 mm graded stone aggregate all as specified and directed. |
| 73 | M&L Concrete bed to 75mm dia PVC( SWR) pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D2 using 40 mm graded stone aggregate all as specified and directed. |
| 74 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified & directed. |
| 75 | M&L Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 76 | Dismantling timber scantling 40 Sqcm and cover in section in any position complete all as specified and directed. |
| 77 | M&L for second class soft-wood, timber framed and fixed, clean sawn, in scantlings complete all as specified and as directed by the Engineer-in-Charge |
| 78 | Dismantling boarding , any description fixed in any position with nails complete as specified and directed |
| 79 | S&F in repair second class softwood 30 mm thick boarding and fixed with nails in any situation clean sawn with butt joints complete all as specified and directed. |
| 80 | S&F in repair second class softwood 15 mm thick boarding and fixed with nails in any situation clean sawn with butt joints and fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar complete all as specified and directed. |
| 81 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided complete all as specified & directed. |
| 82 | M&L for cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation complete all as specified and directed. |
| 83 | M&L for PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregates) as in coping work complete all as specified and directed. |
| 84 | M&L for Cement concrete in surface channels and drains type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed. |
| 85 | Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including foRM s, moulds, mitred/ stopped ends etc, all as specified and directed. |
| 86 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished surface even and smooth without using extra cement etc all as specified and directed. |
| 87 | Demolition of concrete in reinforcement ground floors and pavings n.exc. 15cm thickness(below or above ground level) completed all as specified and directed. |
| 88 | M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs, shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately) completed all as specified and directed. |
| 89 | M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shspe required incl cranking, bending spirally for hooping for coloumns, hooking ends and bonding with (annealed) not less than 0.90 mm dia or securing with clips all a specified and directed |
| 90 | Demolition of cement Concrete 75mm in ground floor and paving n exc 15 cm thickness below or above ground level completed all as specified and directed. |
| 91 | M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm stone graded aggregate completed all as specified and directed. |
| 92 | M&L for Chequered cement concrete tiles 20cm x 20cm x 20mm / 25cm x 25cm x 20mm / 30cm x 30cmx 20mmthick, set jointed and pointed in neat cement slurry in floors, with mixture of white & gray cement in equal proportions & no pigment floors, cut and polished over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by the Engr-In-Charge. |
| 93 | M&L Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 completed all as specified and directed. |
| 94 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets completed all as specified and directed. |
| 95 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm completed all as specified and directed. |
| 96 | S&F Providing and fixing Gypsum Board 8/10mm thick decorative type in ceiling fixed with screw as per manufacturers instructions all as specified. |
| 97 | M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick birla white putty including preparation of surface complete all as specified and directed. |
| 98 | M&L for complete removal of existing treatment and applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of old decorated walls etc , properly making of v shape crakes and filling of all crakes with crake seal of walls complete all as specified and directed by Engr-in-Charge all as specified and directed. |
| 99 | M&L Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface completed all as specified and directed. |
| 100 | S&F tinted glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in Each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all completed all as specified and directed. |
| 101 | M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate completed all as specified and directed. |
| 102 | S&F in repair for Rotational moulded polyethylene 500Ltr water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed |
| 103 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified |
| 104 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified |
| 105 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 106 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, completed all as specified and directed. |
| 107 | M&L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified |
| 108 | M&L for 50mm thick PCC(1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished even and smoth without using extra cement completed all as specified and directed. |
| 109 | M&L for PCC 1:4:8 Type D2 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and completed all as specified and directed. |
| 110 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor completed all as specified and directed. |
| 111 | M&L for damp proof course to horizontal or vertical surfaces including necessary form work, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and as directed by the Engineer-in-Charge |
| 112 | M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and completed all as specified and directed. |
| 113 | M&L for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge |
| 114 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and foRM ing branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and refoRM ing benching as required for 100mm bore pipe line complete all as specified and as directed by the Engineer-in-Charge |
| 115 | M&L for concrete bed to drain pipes of 100mm bore, including forming cradles in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and as directed by the Engineer-in-Charge |
| 116 | S&F in repair of ISI marked 20mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge. |
| 117 | S&F in repair vitreous China wash basin white flat back size 580x450mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, completed all as specified and directed. |
| 118 | S&F in repair vitreous china wash down water closet pan ( pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified. |
| 119 | M&L for chromium plated shower roses of 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendants, light fitting and making good the distributed surfaces of walls, floors as existing completed all as specified and directed. |
| 121 | Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface completed all as specified and directed. |
| 122 | M&L Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 Sqmm drawn through and including PVC casing & caping with mild steel modular sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaust point/ bell point controlled by one switch 5 Amps one way, using the cable of (1.5 Sqmm for phase and neutral and 1.5 Sqmm earthing) Note:- (a) wiring shall be done by using colur cording (b) Earth wire shall be of green colour. |
| 123 | All as per item No 123.00 above, but for one socket outlet 15 Amps on independent board using cable 2.5 Sqmm for phase, neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 124 | All as per item No 123.00 above, but for one socket outlet 5 Amps on indep board using cable 1.5 Sqmm for phase,neutral and earthing complete all as specified and directed by Engr-in-chage. |
| 125 | All as per item No 123.00 above, but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size for phase,neutral and earthing complete all as specified and directed by Engr-in-charge. |
| 126 | S&F Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed. |
| 127 | S&F in repairs for MCB SPN 63 Amps, 240 V 10KA 'C' curve in the MCB DB complete with connection testing and commissioning completed all as specified and directed. |
| 128 | S&F in repairs for MCB SP 6 TO 32 Amps 10 KA 240 V 'B' curve in the MCB DB complete with connection testing and commissioning completed all as specified and directed. |
| 129 | S&F white cover plate with frame, 6 module completed all as specified and directed. |
| 130 | S&F white cover plate with frame, 3 module completed all as specified and directed. |
| 131 | S&F white cover plate with frame, 4 module completed all as specified and directed. |
| 132 | S&F Metal flush box 6 module completed all as specified and directed. |
| 133 | S&F Metal flush box but 3 module completed all as specified and directed. |
| 134 | S&F Metal flush box but 4 module completed all as specified and directed. |
| 135 | S&F in repairs modular Switch socket outlet 3 pin, 16 amp, flush type completed all as specified and directed. |
| 136 | S&F in repairs modular Switch socket outlet 3 pin 6 amp' flush type completed all as specified and directed. |
| 137 | S&F in repairs Socket, 6A - 2/3 pin combined 2 module, completed all as specified and directed. |
| 138 | S&F for Modular switch 1 way 6A, 1 module completed all as specified and directed. |
| 139 | S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type completed all as specified and directed. |
| 140 | M&L Sub main wiring complete with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed, 6 Sqmm, two run 1100 volts grade, incl drawn through PVC sutable size conduit and 6 Sqmm single run for earthing completed all as specified and directed. |
| 141 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completed all as specified and directed. |
| 142 | S&F 1x20 W LED 6000K (4 ft) decorative ultra slim sqare profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp completed all as specified and directed. |
| 143 | S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRM al management in multiple optics complete with IP 65/66 protection completed all as specified and directed. |
| 144 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)Note : Old unsv fan deposite to store yrd. |
| 145 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, theRM ostate, NRV, connection piece etc. all as directed and specified by Engr-in-Charge.Note : Old unsv geyser deposite to store yrd. |
| 146 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below noRM al ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completed all as specified and directed. |
| 147 | S&F in replacement exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers completed all as specified and directed.Note : Old unsv exhaoust fan deposite to store yrd. |
| 148 | S&F in repairs Switch socket combination 3 pin 16A, flush type completed all as specified and directed. |
| 149 | S&F in repairs Switch socket combination 2 in 1, 6A flush type completed all as specified and directed. |
| 150 | S&F in repairs Socket outlet 3 pin, 6A, flush type completed all as specified and directed. |
| 151 | S&F for switch piano flush type 5Amps one way completed all as specified and directed. |
| 152 | S&F in repair Wall mount fan complete with accessories, 230 V, 450 mm sweep, 1300 RPM Min air delivery 60 CMM with service value 6.00 BEE. Five star rated complete all as specified and directed by Engr-in-charge. |
| 153 | M&L River sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed by Engr-in-Charge.Note :- For payment purpose punned thickness shall be measured |
| 154 | M&L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed. |
| 155 | M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 Core completed all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender