Tender For Provision Of Gents Toilet At Hrdc, Hq 108 Mtn Bde Brichgunj Military Station, Sri Vijaya Puram
Tender Value
17.66 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
35500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Gents Toilet At Hrdc, Hq 108 Mtn Bde Brichgunj Military Station, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil etc complete all as specified and as directed. |
| 2 | M&L for Plain Cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed. |
| 3 | M&L for Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in foundations, footings, plinth beams, bases for columns, etc and mass concrete complete all as specified and as directed. |
| 4 | M&L for Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 5 | M&L Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 6 | M&L Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and as directed. |
| 8 | Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in any type of soils complete all as specified and as directed. |
| 9 | M & L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or tobatterfor Fair finished surfaces complete all as specified and as directed. |
| 10 | M&L for use and waste of formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 11 | M&L for use and waste of formwork flat or curved to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc.incl fair finished surfaces complete all as specified and as directed. |
| 12 | M&L for use and waste of formwork flat or curved to formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surfaces complete all as specified and as directed. |
| 13 | M&L for Plain cement concete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in benching to manholes and finishing of exposed surfaces of concrete etc complete all as specified and as directed. |
| 14 | M&L for Plain cement concete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork and finishing of exposed surfacs of concrete etc complete all as specified and as directed. |
| 15 | M&L for Precast cement concrete 1:2:4, type B-1 (20mm graded stone aggregate) as in manholes covers set in cement martor 1:4, including necessary form work (Note :-Reinforcement will be measured and paid separately) etc complete all as specified and as directed. |
| 16 | Cutting into existing manholes for connecting new drains, 100mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-l, smooth finished, and reforming benching as required, complete all as specified and as directed. |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | M&L for TMT bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 19 | All as per Item Ser No.20.00 above but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like complete all as specified and as directed. |
| 20 | M&L for Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in cement mortar 1:6 complete all as specified and as directed. |
| 21 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M & L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 23 | M&L for Rendering 15mm thick in two layers of 10mm thick backing coat in cement moratr 1:6 and 5mm thick floating coat in cement mortar 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement, complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately) |
| 24 | M&L for Rendering 10mm thick, bedding layer with cement mortar 1:4 on roof top surfaces mixed with integral WPC 3% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as specified and as directed. |
| 25 | M&L for Water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 Kg/Sqm and laying APP modified five layer polymeric membrane of minimum wt 3.50 kg/sqm(4mm thick) reinforced with polyster non woven fabric (weighing not less than 160 gm/sqm) laid by torch application as per the manufacture instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm and finally finished with bituminuos aluminium paint @0.10 kg/sqm complete all as specified and as directed. |
| 26 | Supply only Integral water proofing compound conforming to IS-2645 1975 complete all as specified and as directed. |
| 27 | M&L for Preparation of newly plastered wall surfaces and applying two coats of Oil Bound distemper over a coat of primer over a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 28 | M&L for Preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound distemper over a coat of primer over a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 29 | M&L for Preparation of newly plastered wall surfaces and finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed.(Make Apex Ultima) |
| 30 | M&L Surface dressing n exc 15 cm deep and getting out in any type of soil complete all as specified and as directed. |
| 31 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15cm thick, spread and levelled including watering and ramming complete all as specified and as directed. . |
| 32 | M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 10cm thick, watered and rammed to a true surface complete all as specified. |
| 33 | M&L for Plain cement concrete,100mm thick, 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 34 | M&L for Plain cement concrete 1:3:6, 75mm thick, type C1 (using 20mm graded aggregate) as in Plinth Protection etc complete all as specified and as directed. |
| 35 | M&L for Glazed ceramic coloured / printed tiles (450X300mm) x7-8mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 36 | M&L for Coloured Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 37 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors finished with white cement and pigment including 20mm thick screed bed in cement mortar 1:4 all as specified and as directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 40 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 41 | S&F 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 42 | S&F Aluminium anodised barrel tower bolts 150 mm size of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as specified and as directed. |
| 43 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple and fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as specified and as directed. |
| 44 | S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed. |
| 45 | S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed. |
| 46 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches/floors complete all as specified and as directed. |
| 47 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 48 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches/floors complete all as specified and as directed. |
| 49 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 50 | S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 etc complete all as specified and as directed. |
| 51 | S&F PVC (SWR) 110mm dia bend of any radius complete all as specified and as directed. |
| 52 | S&F PVC (SWR) 75mm dia bend of any radius complete all as specified and as directed. |
| 53 | S&F PVC (SWR) 75mm dia double T equal or unequal at Junctions of any radius complete all as specified and as directed. |
| 54 | S&F PVC (SWR) 110mm dia cowls complete all as specified and as directed. |
| 55 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe etc complete all as specified and as directed. |
| 56 | Cutting chasing brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in cement mortar 1:3, cutting not exc 10 cm girth etc complete all as specified and as directed. |
| 57 | Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 58 | Supplying and laying of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 59 | S&F Glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including seat cover, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device and flushing pipe including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as specified and as directed. |
| 60 | S&F PVC flushing cistern,10 ltr capacity, , white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed. |
| 61 | S&F Glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm with and including CI brackets, PVC waste pipe, 32 mm bore brass CP waste couplings with long screwed shanks and fly nuts etc complete all as specified and as directed. |
| 62 | S&F Vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed complete all as specified and as directed. |
| 63 | S&F Vitreous china urinal partition white of size 310x700 mm etc complete all as specified and as directed. |
| 64 | S&F CP toilet paper holder with flat recessed type fixed to walls with chromium plated (CP) brass screws etc complete all as specified and as directed. |
| 65 | S&F Looking mirror bevelled edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 66 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 20 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 67 | S&F Two way bib cock double handle with flange 15 mm bore cast copper alloy chromium plated with wall flang, screwed down, screwed for pipes complete all as specified and as directed. |
| 68 | S&F Brass chromium plated tubular towel rail, 600mm long between flanges fixed with screws and wooden/plastic cleats etc complete all as specified and as directed. |
| 69 | S&F Stop Valves / Angle Cock fancy type chromium plated 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 70 | S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed . |
| 71 | S&F Brass chromium plated bottle traps of size 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 72 | S&F Pillar taps of size 15mm, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed. |
| 73 | S&F Soap dispenser with glass bottle etc complete all as specified and as directed. |
| 74 | M & L for Point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade and including PVC conduit suitable size including Tee junction bends etc fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty.complete all as specified and as directed. |
| 75 | (a) One light point/Exhaust fan controlled by one way switch |
| 76 | (b) One three pin 5 Amp switch socket cum on same board |
| 77 | S&F Switch piano flush type single pole one way 5 Amp complete all as specified and as directed. |
| 78 | S&F Switch socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts complete all as specified and as directed. Make: Anchor/ Leader/ Maru |
| 79 | S&F Ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed. |
| 80 | S&F LED lights fitting 1x22 watt , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and as diected. |
| 81 | S&F LEDlight fitting mirror type with high output diffuser 2 feet, 10 Watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 82 | S&F Street light New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs 35 w as light and electronic driver complete all as per with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete all as specified and as directed. |
| 83 | S&F Exhaust fan steel body suitable for working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM with heavy duty motor incl louvers complete all as specified and as directed. |
| 84 | S&F Metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar with IP 42 protection and double door suitable for mounting MCBs complete all as as specified and as directed. |
| 85 | S&F MCB single pole, 240 volts, 5 to 32 Amps complete all as specified and as directed. |
| 86 | S&F MCB SPN 240 volts,32 Amps complete all as specified and as directed. |
| 87 | M&L for Earthing complete with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC 1:3:6, type C1, Pre cast RCC 1:2:4, type B1, cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (MG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and as directed electrical plate No. 3 of SSR part - I |
| 88 | Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm complete all as specified and as directed. |
| 89 | Supply & laying of cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked complete all specified and as directed. |
| 90 | S&F GI tubing 25 mm bore medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed. |
| 91 | S&F Ball valve 25 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed. |
| 92 | M&L for Cutting existing 40mm GI line and making branch connection of 25 mm dia GI line including fittings required for connections complete all as specified and as directed. |
| 93 | S&F Gun Metal gate valve, 25 mm bore with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specifed and as directed. |
| 94 | Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre capacity etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender