Tender For Periodical Services ,Water Proofing Treatment And Certain Misc Repair To Esh Bldgs Inside Depot Area At Banar.
Tender Value
1.20 Crore
Estimated cost
Bid Submission
12 Nov 2026
26 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services ,Water Proofing Treatment And Certain Misc Repair To Esh Bldgs Inside Depot Area At Banar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt, scrapping down smoke soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on wall with brush leaving permises clean etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Preparation of old decorated surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt, scrapping smoke soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on ceiling with brush leaving permises clean etc complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on walls with brush leaving permises clean etc complete all as specified and dir ected by Engineer-in-Charge. Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 4 | M&L for Preparation of old decorated surfaces of Ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on walls with brush leaving permises clean etc complete all as specified and directed by Engineer-in-Charge. Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 5 | M&L for Preparation of old painted surfaces of (wall/ceiling) any description wood, steel, iron , concrete, brick, stone etc. (Plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of fire resisting paint on surface with brush/roller complete all as specified and directed by Engineer-in-Charge.Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 6 | M&L for Preparation of old decorated surfaces of walls including chajja, facia, roof projection on roof and and wall etc (plastered or unplastered) including cornices, pillasters etc removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of cement base paint on external wall surface camouflaging pattern including 2 kg of fevicol per 30 kg of cement base paint should be mixed by using brush upto the 10 Mtr height complete all as specified and directed by Engineer-in-Charge. Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 7 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and finishing walls with Acrylic Smooth exterior paint in camouglaging pattern of required shade : old work (one coat applied @ 1.00 ltr/5-6 sqm approx complete all as specified and directed by Engineer-in-Charge. Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 8 | M&L for Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of ordinary tint etc complete all as specified and directed by Engineer-in-Charge. |
| 9 | Taking down cement plaster on walls of any description including racking out joints, hacking for key scrubbing down with water etc upto the height 10 Mtr complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for rendering 15mm thick ready mix plaster in ratio 1:6 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement upto 10 mtr height complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for two coats of oil bound distemper on newly plastered walls to prepare the surface even and smooth over one coat of alkali resistant priming paint including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for 10 mm thick ready mix plaster in ratio 1:3 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement upto 10mtr height complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for rendering 15mm thick ready mix plaster in ratio 1:4 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement upto 10 mtr height complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or steel wire brushing removing dust, dirt etc scrapping down smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and finishing walls with Acrylic Smooth exterior paint in camouglaging pattern of required shade : Newly plastered surfaces (two coats applied @ 2.00 ltr/10 sqm approx complete all as specified and directed by Engineer-in-Charge. Note : (i) Requisite quantity of material will be deposited by contractor immediately after approval of sample for safe custody.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 16 | Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 30 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as specified and directed by Engineer-in-Charge (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from authorized dealer of manufacturer. |
| 17 | M&L for taking down and removal of loose / disintegrated old concrete / plaster and applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of Chajja, Facia,ceiling, beams and alike complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg/sqm and M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.Note :- Water proofing additive shall be measured and paid separately. Please Enable Macros to View BoQ information |
| 20 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg/sqm and M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.Note :- Water proofing additive shall be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender