Tender For special Repair Of Building No P-14 (1 & 2) & P-18 (1 & 2) Jcos Md Accn Under Age B/R-I & Age E/M Under Ge Babina
Tender Overview
Project Description
Tender for special Repair Of Building No P-14 (1 & 2) & P-18 (1 & 2) Jcos Md Accn Under Age B/R-I & Age E/M Under Ge Babina
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Corrigendum No I | BOQ | 05-Nov-2026 |
| 2 | 05-Nov-2026 | Corrigendum No II | Date | 16-Nov-2026 |
| 3 | 16-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Roughening of existing surface/removing existing water proofing treatmentof old concrate floor by picking, sweeping clean and washing down with water to remove dust, etc. And brushing neat cement slurry with 3.00 kg of cement per sqm and remove from the site of all waste materials, roughing surface of corner to roof by wire brush and all the open cracks/honeycomb should repair properly complete all as specified and directed. |
| 2 | M&L cutting out cracks to 'V' Section in existing roof or terracing, cleaning out, wetting and filling solidly a hot mixture of bitumen and dry sand in proportion of 1:1 by weight complete all as specified and as directed. |
| 3 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately |
| 4 | Supply only integral water proofing compound complete all as specified and as directed. |
| 5 | M&L applying water proofing treatment with the following(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including a coat of Aluminium paint on top surface of memberne.(d) M&L for Preparation of newly surface of APP membrane and applying two coat of bituminous aluminium paint @200 gm /sqm etc complete all as specified and as directed. |
| 6 | Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 7 | Supplying, fixing, jointing and testing Supplying and laying of 15 mm dia bore CPVC pipes pittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified. |
| 8 | Supplying, fixing, jointing and testing Supplying and laying of 20 mm dia bore CPVC pipes pittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified. |
| 9 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and directed. |
| 10 | Dismantling water tanks and removing to store of steel/PVC of capacity exceeding 500 ltr but not exceeding 1000 Ltr complete all as directed by Engineer in Charge. |
| 11 | S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position with and including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting complete all as specified in SSR Part -I complete all as specified and as directed |
| 12 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms), complete all as specified and directed |
| 13 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 15 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 16 | M&L for screed bed or bedding layer in CM 1:6, 15mm thick complete all as specified and directed. |
| 17 | M&L Ceramic tiles light or dark shed 7-8 mm thick, (square/ rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 18 | M&L Ceramic tiles light or dark shed 7-8 mm thick, (square/ rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 19 | M&L for non skid white ceramic tiles 6 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 20 | Material & Labour glazed ceramic white/coloured wall tile 1200x600x7-8 mm thick on skiriting/dado, set & jointed with high-performance adhesives , grouts and cleaning & pointed with white/coloured cement to match inc for laying tiles on skirting/dado including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and as directed. |
| 21 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete. |
| 22 | Demolition of PCC in any description and in any position etc complete all as specified at site all as directed by Engineer in Charge. |
| 23 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 24 | M&L 10mm thick mettle finish heavy duty endura tiles, area of each tile not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and directed. |
| 25 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc all as directed by Engineer in Charge. |
| 26 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 27 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. |
| 28 | M&L 15 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished fair and even with out suing extra cement all as directed by Engineer in Charge. |
| 29 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 30 | M&L for rendering 10 mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed |
| 31 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 32 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 33 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. |
| 34 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 35 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 36 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc. and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge |
| 37 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc. and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 39 | S&F 30 mm thick FACTORY MADE WIRE MESH SOLID WPC both side solid decorative DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,including SS mosquito Mesh and XTN aluminium Mesh with aluminum deco grill for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 40 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed. |
| 41 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed |
| 42 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. |
| 43 | S&F in repair aluminum adjustable automatic spring door closer (silver colour) with allen key and screws weight minium 200 gm etc complete and as directed. |
| 44 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete. |
| 45 | S&F continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electrogalvanised etc complete and as directed. |
| 46 | S & F in repair for 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading and including necessary fixing aragement to wall etc. complete all as specified and directed by Engg-in-charge. Note:- (i) Sample and design of moduler box as approved by Engr-in-charge. (ii) Area will be measured only front side of moduler box for payment to contractor. |
| 47 | S&F for 12mm commercial plywood,grade BWR, type BB,fixed with screws to timber frame work etc complete all as specified and directed |
| 48 | Supply & Fixing 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. |
| 49 | S & F auto closing SS hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed Make:- KAFF or equivalent as approved by GE |
| 50 | Supply and fixing factory made uPVC white colour Three track and three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including outer frame/track upto 1.50m height made of including outer size frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. ------- |
| 51 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
| 52 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender