Tender For Provn Of Ht Switch Gear Safety Devices And Allied Works At Mh Shimla Under Ge (I) Jutogh
Tender Value
44.83 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
89660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Ht Switch Gear Safety Devices And Allied Works At Mh Shimla Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | INCOMER VCB PANEL 800 AMP: “Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50Hz, Indoor type Metal Clad, totally enclosed & fully interlocked draw out type Vacuum Circuit Breaker as per IEC 62271-100/200/ IS 13118. Single break trip free breaker with self contained operated fully interlocked rack in & rack out mechanism. Breaker Chamber CRCA Sheet : Load bearing part-2.0 mm, Non- load bearing-2.0mm Degree of Protection- IP4X, Cable Entry- IC Bottom, OG Bottom, Paint Shade - RAL7032- 01 Nos, 26.3 kA for 3 secs. Breaker is featured with mechanical ON & OFF Indicator with hand trip device, Spring release coil, Shunt trip coil & auxiliary switch of 4 C/O contacts. Tripping Coil (1) - 110V DC Closing Coil (1) - 110V DC Spring Charge Motor - 230V AC – 01 Nos. Bus Bar With Heat Shinkable Sleevs as per CT ratio Material – Aluminum complete all as specified and directed by Engr-in Charge with the following :- (a) 11KV CT/PT DETAILS :(i) CTR- 150/5-5A; CL-0.5, 5P10, 15VA – 03 Nos Make : Nortex/Savio/Avcon/Delta(ii) PTR- 11kV/RT3/110V/RT3/110V/RT3; CL-0.5, 3P; 100VA – 03 Nos. Make : Nortex/Savio/Avcon/Delta or in equivalent.(b) BREAKER PANEL INDICATION LAMPS : (i) Breaker On / Off /Auto Trip / Trip Circuit Healthy / Spring Charge /Service Position/Test Position - 7 Nos, Make : Essen/Teknic or in equivalent |
| 2 | (ii) R,Y,B Phase indicator 3 – 03 Nos, Make : Essen/Teknic or in equivalent(c) SWITCHES AND OTHER ACCESSORIES : (i) Control MCB's – 02 Nos, Make : L&T/TEKNIC/SEIL or in equivalent(ii) Heater with selector switch & thermostat – 02 Nos, Make : Kaycee/Elecon/Hotwell/Garish or in equivalent(iii) Cubicle illumination lamp- 01No, Make : Phillips/Havells or in equivalent(iv) 15A, 230V, 3 pin plug & socket - 01 No, Make : Anchor or in equivalent(v) Local Remote Switch - 1 No, Make : Recom/GT/Kaycee or in equivalent(vi) T-N-C Switch -1 No, Make : Kaycee/Recom/GT or in equivalent(vii) Door Limit Switch -1 No, Make : Veeco/Vaishno or in equivalent(viii) Hooter- 1No, Make : Avana/Seco or in equivalent(ix) Emergency Push Button- 1 No, Make : Essen /Teknic / Kaycee or in equivalent |
| 3 | (d) METERS/ANNUNCIATOR : (i) MFM meter CL-0.5 with RS485 port Elite 30B-01 Nos, Make : Secure/Elmeasure or in equivalent(ii) Digital 3 phase Ammeter; CL-0.5 - 1 Nos, Make : Secure/Elmeasure or in equivalent(iii) Digital 3 phase Ammeter; CL-0.5 - 1 Nos, Make: Secure/Elmeasure or in equivalent(iv) Annunciator - 8W, Make : Avana/Seco or in equivalent(e) RELAYS : (i) OC/EF Relay (50,51,50N,51N), P1F1L with RS485 Port - 01 Nos Make Schneider or in equivalent(ii) Master Trip Relay, Hand reset, (3NO+1NC),EMR151- 01Nos Make Avana/C&S or in equivalent (iii) Anti pumping (94) - 8 Pin Relay – 01 Nos Make Salzer/Omron or in equivalent(f) OTHERS : (i) Power Pack 7Ah (230V AC/110V DC) -01Nos Make : Mahamai/Reputed or in equivalent |
| 4 | OUTGOING VCB PANEL 630 AMP : “Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50Hz “ Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50Hz, Indoor type Metal Clad, totally enclosed & fully interlocked draw out type Vacuum Circuit Breaker as per IEC 62271-100/200/ IS 13118. Single break trip free breaker with self contained operated fully interlocked rack in & rack out mechanism. Breaker Chamber CRCA Sheet : Load bearing part-2.0 mm, Non- load bearing-2.0mm Degree of Protection- IP4X, Cable Entry- IC Bottom, OG Bottom, Paint Shade - RAL7032- 01 Nos, 26.3 kA for 3 secs. Breaker is featured with mechanical ON & OFF Indicator with hand trip device, Spring release coil, Shunt trip coil & auxiliary switch of 4 C/O contacts. Tripping Coil (1) - 110V DC Closing Coil (1) - 110V DC Spring Charge Motor - 230V AC – 01 Nos. Bus Bar With Heat Shrinkable Sleeves as per CT ratio Material – Aluminum complete all as specified and directed by Engr-in Charge with the following:- (a) 11KV CT/PT DETAILS :(i) CTR- 75/5-5A; CL-0.5, 5P10, 15VA – 03 Nos Make : Nortex/Savio/Avcon/Delta or in equivalent(b) BREAKER PANEL INDICATION LAMPS : (i) Breaker On / Off /Auto Trip / Trip Circuit Healthy / Spring Charge /Service Position/Test Position - 7 Nos, Make : Essen/Teknic or in equivalent |
| 5 | (c) SWITCHES AND OTHER ACCESSORIES : (i) Control MCB's – 02 Nos, Make : L&T/TEKNIC/SEIL or in equivalent(ii) Heater with selector switch & thermostat – 02 Nos, Make : Kaycee/Elecon/Hotwell/Garish or in equivalent(iii) Cubicle illumination lamp- 01Nos, Make: Phillips/Havells or in equivalent(iv) 15A, 230V, 3 pin plug & socket - 01 Nos, Make : Anchor or in equivalent(v) Local Remote Switch - 1 Nos, Make: Recom/GT/Kaycee or in equivalent(vi) T-N-C Switch -1 Nos, Make : Kaycee/Recom/GT or in equivalent(vii) Door Limit Switch -1 Nos, Make : Veeco/Vaishno or in equivalent(viii) Hooter- 1Nos, Make : Avana/Seco or in equivalent(ix) Emergency Push Button- 1 Nos, Make : Essen/Teknic/Kaycee or in equivalent (d) METERS/ANNUNCIATOR : (i) MFM meter CL-0.5 with RS485 port Elite 30B-01 Nos, Make: Secure/Elmeasure or in equivalent(ii) Digital 3 phase Ammeter; CL-0.5 - 1 Nos, Make : Secure/Elmeasure or in equivalent(iii) Annunciator - 8W, Make : Avana/Seco or in equivalent |
| 6 | (e) RELAYS : (i) OC/EF Relay (50,51,50N,51N), P1F1L with RS485 Port - 01 Nos, Make : Schneider or in equivalent(ii) Master Trip Relay, Hand reset, (3NO+1NC),EMR151- 01Nos, Make : Avana/C&S or in equivalent (iii) Auxilary trafo. relay, EMR261 3 Element, 4NO- 02 Nos, Make : Avana/C&S or in equivalent(iv) Anti pumping (94) - 8 Pin Relay – 01 Nos, Make: Salzer/Omron or in equivalent(f) OTHERS : (i) Intermediate Aluminium Busbar as per requirement of panel, Make Century/Eletech or in equivalent |
| 7 | OUTGOING VCB PANEL 630 AMP, 1000 KVA, “Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50Hz “ Supply, installation, testing & commissioning of HT 11 KV, 3 phase, 50Hz, Indoor type Metal Clad, totally enclosed & fully interlocked draw out type Vacuum Circuit Breaker as per IEC 62271-100/200/ IS 13118. Single break trip free breaker with self contained operated fully interlocked rack in & rack out mechanism. Breaker Chamber CRCA Sheet : Load bearing part-2.0 mm, Non- load bearing-2.0mm Degree of Protection- IP4X, Cable Entry- IC Bottom, OG Bottom, Paint Shade - RAL7032- 01 Nos, 26.3 kA for 3 secs. Breaker is featured with mechanical ON & OFF Indicator with hand trip device, Spring release coil, Shunt trip coil & auxiliary switch of 4 C/O contacts. Tripping Coil (1) - 110V DC Closing Coil (1) - 110V DC Spring Charge Motor - 230V AC – 01 Nos. Bus Bar With Heat Shrinkable Sleeves as per CT ratio Material – Aluminum complete all as specified and directed by Engr-in Charge with the following :- (a) 11KV CT/PT DETAILS :(i) CTR- 50/5-5A; CL-0.5, 5P10, 15VA – 03 Nos Make : Nortex/Savio/Avcon/Delta or in equivalent |
| 8 | (b) BREAKER PANEL INDICATION LAMPS : (i) Breaker On / Off /Auto Trip / Trip Circuit Healthy / Spring Charge /Service Position/Test Position - 7 Nos Make Essen/Teknic or in equivalent(c) SWITCHES AND OTHER ACCESSORIES : (i) Control MCB's – 02 Nos Make L&T/TEKNIC/SEIL or in equivalent(ii) Heater with selector switch & thermostat – 02 Nos, Make Kaycee Elecon / Hotwell /Garish or in equivalent(iii) Cubicle illumination lamp- 01Nos Make Phillips/Havells or in equivalent(iv) 15A, 230V, 3 pin plug & socket - 01 Nos Make Anchor or in equivalent(v) Local Remote Switch - 1 Nos Make Recom/GT/Kaycee or in equivalent(vi) T-N-C Switch -1 Nos Make Kaycee/Recom/GT(vii) Door Limit Switch -1 Nos, Make : Veeco / Vaishno or in equivalent (viii) Hooter- 1Nos Make Avana/Seco (ix) Emergency Push Button- 1 Nos Make Essen/Teknic/Kaycee |
| 9 | (d) METERS/ANNUNCIATOR : (i) MFM meter CL-0.5 with RS485 port Elite 30B-01 Nos, Make: Secure/Elmeasure or in equivalent(ii) Digital 3 phase Ammeter; CL-0.5 - 1 Nos, Make:Secure/Elmeasure or in equivalent(iii) Annunciator - 8W, Make: Avana/Seco or in equivalent(e) RELAYS(i) OC/EF Relay (50,51,50N,51N), P1F1L with RS485 Port - 01 Nos, Make : Schneider or in equivalent(ii) Master Trip Relay, Hand reset, (3NO+1NC),EMR151- 01Nos, Make: Avana/C&S or in equivalent(iii) Auxilary trafo. relay, EMR261 3 Element, 4NO- 02 Nos, Make: Avana/C&S or in equivalent(iv) Anti pumping (94) - 8 Pin Relay – 01 Nos, Make: Salzer/Omron or in equivalent(f) OTHERS : (i) Intermediate Aluminium Busbar as per requirement of panel, Make : Century/Eletech or in equivalentNote: All 3 VCBs as catered under Srl Item Nos 01, 02 and 03 shall be connected with compact interlink continue bus bar. |
| 10 | Supply, installation and testing of copper wound transformer step up/ step down, indoor/outdoor type complete with standard fittings, HT 11 KV, 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tapings on HT side to vary secondary voltage within limit, conforming to IS:2026 of capacity 630 KVA complete all as specified and directed. |
| 11 | M&L for LT panel made up of fabricated GI sheet powder coated 2mm thickness, CPRI approved along with MCB MDO 1250 Amp FP50KA - 01 No, Digital volt meter 0-500V - 01 No, Digital Ammeter 0-1250A - 01 No, selector switch - 01 No, CTs 1250 / 5 Amp, phase indicator 22.5mm - 03 Nos including copper bus bar, mounted on and including angle iron base frame of size 50x50x6mm complete all as specified and directed. |
| 12 | M&L for XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy-duty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 120 Sqmm, 3 Core complete all as specified and directed. |
| 13 | M&L for XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy-duty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 Sqmm, 3 Core complete all as specified and directed. |
| 14 | S&F cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed. |
| 15 | S&F cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed. |
| 16 | S&F Burnished metallic brown 99.69%,ly Non Galvanized non electrolyte Earthing Electrode with Exothermic welding / breezing Welding at top of earthing electrode 300mm with Chemical filled in electrode. chemical analysis highly, Thickness Internal dispose, 2inch x6mm with base plate 3.15 to close the earthing rod. Terminal 2inch x6mm filled with highly conductive compound which increase the life of Earthing electrode .Composition of chemical filled in electrode water Solubility, acid solubility Grain size 100mesh, along with SN makes BFC Compound non toxic, non reactive, nonexplosive and non corrosive, longer life easy to maintain less space consistent results, With Earth Pit Chamber Cover complete all as specified as directed. Make SN ENGINEERING or equivalent as approved. |
| 17 | M&L for HT insulation Mat of thickness 2.0mm suitable for capacity up to 11 KV and IS-15652, B class complete all as specified and directed. |
| 18 | Supply, Fixing & laying in trenches GI pipe light grade 32 mm dia for mechanical protection of cable in road crossing, along the pole/culvert /drainage complete all as directed. |
| 19 | S&F copper strip 20mm x 3mm buried in ground complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender