Tender For Providing Water Supply, Electrical And Toilet Arrangements To The Food Street At Maravaneri Chinnaya Street In Division No: 29 Of Hasth Atty Ward Office, Salem Corporation
Tender Value
8.80 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
8800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Water Supply, Electrical And Toilet Arrangements To The Food Street At Maravaneri Chinnaya Street In Division No: 29 Of Hasth Atty Ward Office, Salem Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Geophysical Investigation charges including preparation of geophysical report as per TWAD Board type circular including all cost of transportation and handling charges etc.,complete |
| 2 | Supply and delivery of PVC casing pipe as per IS 12818 / 2010 for bore well including cost ang convayance of material and labour charge etc complete. |
| 3 | a). 150mm CS |
| 4 | b). 200mm CS |
| 5 | Drilling of 150mm(6\\") dia Vertical clear bores in Hard rock in any habitation any where in Salem District to any required depth as directed b y the officers concerened including labour charges for inserting M.S/P.V.C Casing pipes to any reauired depth , assembilling in the drilled hole including welding joints if necessary . Grouting the cassing pipes including conducting proper yield test at final depath (by provinding 90 ' V' Notch fitted in a formed channel and the correct yield at the time of free flow in the channel while flushing the bore after completion of drilling process should be ascertained of and reported )including Bore cover transportation. crew and fuel charges for rigs and supporting Vechicles from one place to another etc Complete and as directed by officers Concerned. |
| 6 | a). Up to 150m Below GL |
| 7 | b). From 151m to 180m |
| 8 | c). From 181m to 210m |
| 9 | Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete |
| 10 | a). 150mm CS |
| 11 | b). 200mm CS |
| 12 | Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % (50 LPM x 175m) |
| 13 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 14 | Supply and delivery of 4sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete. |
| 15 | Providing Construction of pedestal for KIOSK Meter Box including cost of earth work PCC 1:4:8 using 40 mm metal brick work in CM 1:5 using country bricks, plastering in CM 1:3-20mm thick etc., as per standard specification including all cost and conveyance etc., complete. (Including MS KIOSK Box) |
| 16 | Labour charges for the erection of submersible pump set in bore well including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phase preventor, water level guard and laying and jointing the cable and twin earthing as per IS rules etc complete. |
| 17 | Supply and Delivery of Following WS Materials ISI standarad etc, complete. |
| 18 | 50mm HDPE Hose |
| 19 | 20mm GI Bend |
| 20 | 25mm PVC Ball Valve |
| 21 | 25mm Tank Nipple |
| 22 | 20mm Gi B.Nipple 9\\" |
| 23 | 32mm Gi B.Nipple 6\\" |
| 24 | 32mm Gi B.Nipple 12\\" |
| 25 | 40mm HDPE Hose (Delivery Line) |
| 26 | 32mm PVC pipe |
| 27 | 25mm PVC pipe |
| 28 | 32mm PVC bend |
| 29 | 32mm PVC Tee |
| 30 | 32mm PVC Coupler |
| 31 | 32mm PVC Elbow |
| 32 | PVC Adhesive (Solution) 100gm |
| 33 | Thread Ball |
| 34 | Shellac (100ml) |
| 35 | 32mm GI Pipe |
| 36 | 32mm GI Elbow |
| 37 | 32mm HD Collar |
| 38 | 32mm GI Coupling |
| 39 | 32mm GI Bend |
| 40 | 32mm Borewell Clamp |
| 41 | Bore Cap M.S Flate size 6\\" |
| 42 | 32mm Gi Union |
| 43 | 32mm Gi Hex Nipple |
| 44 | Nylon Rope |
| 45 | 1000 Lit Capacity HDPE Tank |
| 46 | 110mm dia PVC Pipe |
| 47 | 110mm PVC Bend |
| 48 | 110mm PVC Elbow |
| 49 | S.S.Sink 600mm x 600mm x 200mm |
| 50 | Supply and Delivery of Following Electrical Materials ISI standarad etc, complete. |
| 51 | 4 sq.mm. PVC unsheathed FRLS SC copper cable |
| 52 | GI wire No. 8 or No.6 SWG |
| 53 | 1.5 sq.mm.PVC SC copper cable |
| 54 | 20mm GI Tee |
| 55 | Three Phase Meter Box |
| 56 | 32A Fuse Unit (500v) |
| 57 | 20mm GI Pipe |
| 58 | SS Nails |
| 59 | Four Way Reel |
| 60 | 20mm WL Clamps |
| 61 | Insulation Tape |
| 62 | 32A MCB DP |
| 63 | 32A neutral link |
| 64 | Earth link (1\\" x 1/8\\") copper flat |
| 65 | Earth connection |
| 66 | Removing the Existing damaged Tiles area at Foot path Flooring including all labour charges etc., complete |
| 67 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x 23/4\\") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 68 | Supplying and fixing in position of Steel iron truss work including all cost and conveyance of all materials and labour etc., complete and as per s.s. |
| 69 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 70 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 71 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. (Solid panel PVC door with frame) |
| 72 | Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
| 73 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 74 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 75 | Painting two coats with best synthetic enamel paint of approved Colour for new iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work. |
| 76 | Wiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil SD - 22 |
| 77 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point - SD-36 |
| 78 | Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fittingSD - 441 |
| 79 | Supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 30W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour SD-463 |
| 80 | Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD 200 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender