Tender For Purchase Of Equipment
Tender Overview
Project Description
Tender For Purchase Of Equipment , Research Grade Laboratory Hot-Air Oven With Accessories , Door : 1 Solid, Shelves : 2, Dimensions (W × H × D) : 438 × 680 × 589 Mm Voltage : 230 V / 50 Hz Temperature Range : 50ºc To 250ºc Temperature Uniformity (Spatial Deviation) : ≤ ± 4ºc At 150ºc Temperature Accuracy & Uniformity : ≤ ±0.4ºc At 150ºc & ±4.5ºc Temperature Sensor : Pt100 Standard Access Port For External Sensors : To Enable Independent Sample Temperature Monitoring Without Disturbing Chamber Hermeticity.Display : Display For Time, Temperature And Alarms Time Setting : On/Off Time Setting Ventilation / Air Exchange : 18 H⁻¹ Heating Power : 14 Annual Periodical Maintenance Power Consumption : 320 W Recovery Time : 9 Mins (Work Space Unoccupied, Door Open For 30 S, To Set Temperature) Safety : Safety Over-Temperature Alarm Temperature Stability : ≤ ±0.4ºc At 150ºc Air Convection Technology : Gravity Convection Usable Space : Approximately 176 Liters Automatic Over-Temperature Alarm : Automatic Over-Temperature Alarm Without Need For Manual Setting Interior Surface Material : Aisi 430 / 1.4016 Grade Stainless Steel Interior Surface : Stainless Steel Chamber Design : Rounded Corners For Easy Cleaning And To Avoid Contamination Shelf System : Easy To Fit And Remove Easily With One Hand And Without The Use Of Tools User Interface : Microprocessor Controlled Display Type : Large Vacuum Fluorescent Display Control : Touch Button Control Controller : On/Off Timers Heat-Up Time : 25 Min (Work Space Unoccupied, From 25°C To 98% Of Set Temperature Of 150°C) Standard Shelves : 2 Shelves As Standard Maximum Shelf Capacity : Capable Of Accommodating A Maximum Of 19 Shelves Shelf Load Capacity : 25 Kg Damper : Manually Controlled Damper Opening For Venting Out Chamber Air Access Port : Access Port For Independent Monitoring Of Sample Temperature At The Back Side Of The Unit Rapid Heat-Up : Function For Rapid Heat-Up Of Chamber Interior Door Opening : 180º Angle For Complete Access To Chamber Interior Communication Interface : Rs 232 Interface Warranty : 1 Year Operating Supply : 230 V / 50 Hz Accessories : Additional Wire Mesh Shelf. Stand With Casters For Stacked Units. Fresh Air Particle Filter. Silicon-Free Viton Door Sealing. Laboratory Shell Grinder Factory Installed Options : Left Hinge Door; Additional Access Ports On Left Or Right Side Or On Top Standard Compliance : En 61326-1 : 2013; En 61010-1 : 2001;En 61010-2-010 : 2003; En 50581 : 2012 Ce Certification : Ce Certificate Compliance Certification : Certificate Of Compliance Quality Certification : Iso 13485 : 2016 Manufacturer Website : All The Above Specifications Must Be Available On The Manufacturers Website Government Users : At Least 10 Government Users List With Contact Number And Email Id To Be Provided Service Station : Principal Company Service Station Must Be Available In Tamil Nadu Service Station Documentation : Address Proof For The Tamil Nadu Service Station To Be Provided
BOQ
| Sl. No. | Item Description |
| 1 | Research Grade Laboratory Hot-Air Oven with Accessories |
| 2 | Door : 1 Solid, Shelves : 2, Dimensions (W × H × D) : 438 × 680 × 589 mm Voltage : 230 V / 50 Hz Temperature Range : 50ºC to 250ºCTemperature Uniformity (Spatial Deviation) : ≤ ± 4ºC at 150ºC Temperature Accuracy & Uniformity : ≤ ±0.4ºC at 150ºC & ±4.5ºCTemperature Sensor : PT100 Standard access port for external sensors : To enable independent sample temperature monitoring without disturbing chamber hermeticity.Display : Display for time, temperature and alarms Time Setting : ON/OFF time setting Ventilation / Air Exchange : 18 h⁻¹ Heating Power : 14 Amp Power Consumption : 320 W Recovery Time : 9 mins (work space unoccupied, door open for 30 s, to set temperature) Safety : Safety over-temperature alarm Temperature Stability : ≤ ±0.4ºC at 150ºC Air Convection Technology : Gravity convectionUsable Space : Approximately 176 Liters Automatic Over-temperature Alarm : Automatic over-temperature alarm without need for manual settingInterior Surface Material : AISI 430 / 1.4016 grade stainless steel Interior Surface : Stainless steel Chamber Design : Rounded corners for easy cleaning and to avoid contamination Shelf System : Easy to fit and remove easily with one hand and without the use of tools User Interface : Microprocessor controlled Display Type : Large vacuum fluorescent display Control : Touch button controlController : ON/OFF timers Heat-up Time : 25 min (work space unoccupied, from 25°C to 98% of set temperature of 150°C)Standard Shelves : 2 shelves as standard Maximum Shelf Capacity : Capable of accommodating a maximum of 19 shelvesShelf Load Capacity : 25 kg Damper : Manually controlled damper opening for venting out chamber air Access Port : Access port for independent monitoring of sample temperature at the back side of the unit Rapid Heat-up : Function for rapid heat-up of chamber interiorDoor Opening : 180º angle for complete access to chamber interior Communication Interface : RS 232 Interface Warranty : 1 yearOperating Supply : 230 V / 50 Hz Accessories : Additional wire mesh shelf. Stand with casters for stacked units. Fresh air particle filter.Silicon-free VITON door sealing. Laboratory shell grinder Factory Installed Options : Left hinge door; additional access ports on left or right side or on top Standard Compliance : EN 61326-1 : 2013; EN 61010-1 : 2001;EN 61010-2-010 : 2003; EN 50581 : 2012CE Certification : CE Certificate Compliance Certification : Certificate of Compliance Quality Certification : ISO 13485 : 2016Manufacturer Website : All the above specifications must be available on the manufacturer's websiteGovernment Users : At least 10 government users list with contact number and email ID to be providedService Station : Principal company service station must be available in Tamil NaduService Station Documentation : Address proof for the Tamil Nadu service station to be provided Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender