Tender For Formation Of Park At Brindhavan Nagar In Ward No 23 East Zone. Roc No.5045/2026/Md3
Tender Value
75 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
75000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Formation Of Park At Brindhavan Nagar In Ward No 23 East Zone. Roc No.5045/2026/Md3
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 10m initial lead and 2m initial lift as per the direction of Engineer-in-charge. |
| 2 | Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification. |
| 3 | Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM, STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification and as directed. |
| 4 | Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for RCC Column etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc., |
| 5 | Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification |
| 6 | Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete. |
| 7 | BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9\\"x4 ½\\"x3\\" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost. |
| 8 | PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications. |
| 9 | PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work. |
| 10 | Painting with two coats of Emulsion paint using good quality and approved colour over a base coat of white cement including cleaning, curing etc. complete. (The paint to be used should be got approved by the Executive engineer before use on work). |
| 11 | Filling with River sand layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer. |
| 12 | Filling with Quvary dust layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer. |
| 13 | Supply and fixing of outdoor Chest Press Machine gym equipment fabricated with heavy-duty galvanized and powder-coated MS structure complete. |
| 14 | Supply and fixing of outdoor Leg Press Machine and Chest press gym equipment fabricated with heavy-duty galvanized and powder-coated MS structure complete. |
| 15 | Supply and fixing of ornamental Park benches of size 1.50m x 0.6m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work. |
| 16 | Supply and fixing of Outdoor Gyroscope Play Equipment made of heavy-duty powder-coated galvanized steel frame with stainless steel rotating mechanism, anti-slip standing platform, sealed maintenance-free bearings, safety handrails and all necessary anchor bolts, including RCC foundation, excavation, concreting, installation and commissioning complete as per manufacturer's specifications. |
| 17 | Supply and fixing of Outdoor Pendulum with Steel Balls educational play equipment comprising heavy-duty powder-coated galvanized steel support frame with suspended stainless steel pendulum balls, precision bearings, safety mounting arrangement and vandal-resistant construction, including RCC foundation, excavation, concreting, installation and all necessary fittings complete. |
| 18 | Supply and fixing of Outdoor Echo Tube comprising UV-stabilized HDPE/FRP acoustic collectors with galvanized steel support posts, powder-coated finish, underground connecting acoustic tube, RCC foundation, excavation, concreting, installation and all necessary accessories complete for interactive outdoor play. |
| 19 | Supply and fixing of children’s spring riders (4 units) made of FRP/LLDPE body mounted on heavy-duty spring base with powder-coated support structure complete. |
| 20 | Supply and fixing of children’s see-saw teeter-totter (2 units) made of FRP/LLDPE body mounted on heavy-duty spring base with powder-coated support structure complete. |
| 21 | Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG approved by the Executive engineer before use on work. |
| 22 | Supply and Fixing of Toddler slide SS 304 approved by the Executive engineer before use on work. |
| 23 | Supply and Fixing of Four seater swing using 3m long 65mm dia M.S. pipe of 3mm thick. The Slide supports are 3m long 50mm dia M.S pipe of 3mm thick. The 3 way sockets using 3mm M.S. plate and grip the entire unit rigidly. Two swing clamp with ‘U’ approved by the Executive engineer before use on work. |
| 24 | Supply & Fixing of Revolving platform junior 4 ft dia 4mm thick plate platform 1 ft high from the ground. 90mm heavy centre pipe 4 ft high from the ground, 2 heavy duty bearning 25mm pipe handles - 6 nos (including painting) and installation of 2 ft deep 2ft x 2ft pit with cement concrte etc., complete as per the direction of the departmenatl officers |
| 25 | Supply and fixing of outdoor Air Walker (elliptical strider) gym equipment made of heavy-duty galvanized and powder-coated MS structure with smooth movement mechanism complete. |
| 26 | Supply and fixing of outdoor Rowing Machine gym equipment using heavy-duty powder-coated MS frame with ergonomic seating and handle system complete. |
| 27 | Cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly for All plain CC items of work excluding centering, shutterin, and cost of reinforcement grill but including curing finishing etc., complete |
| 28 | Supply and fixing of L angle, Grill including cutting, bending , welding and erection charges etc. |
| 29 | Supplying and plastering of korean grass including preparing the existing ground by planting the grass to the regulare design by digging the surface 15cm depth as directed by the departmental officers and refilling wth sand and red soil and form yard manure with required base and application or BHC 10% or equvalent chemical for the control or pest and discuses and providing root regulated chemical like neam cake and organic chemical and planting the korean grass including watering guttering and maintenance for the period of sixmonths as directed by the departmental officers including higher charges watering sprinkling for all the period of maintenance and conveyance of water in all needs. |
| 30 | Filling with Red gravel layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer. |
| 31 | Supply and fixing of HDPE tank approved by the Executive engineer before use on work. |
| 32 | Provision for Geologist from the TamilNadu Agricultural University for inspecting the site and for making the borewll point |
| 33 | Supply and Fixing of Solar LED Pole Lights 30W etc complete |
| 34 | Supply and Fixing of Solar LED Pole Lights 50W etc complete |
| 35 | Supply and Installing security cabin prefab etc complete |
| 36 | Supply and Installing of electrical room structure etc complete |
| 37 | Provision for washroom facility etc complete |
| 38 | Drilling of Borewell 165mm dia vertical bores depth as directed by the departmental officers including labour charges for inserting casing pipe assembling in the drilling holes including welding, jointing, grouting, the casing pipe etc,. Including transportation etc for borewells. |
| 39 | Supply of 180mm dia OD PVC casing pipe 6 kg/cm2 Suitable wall thickness including erection and welding including the cast of coupling etc complete |
| 40 | Supply of MS borewell cover |
| 41 | Supply of 32 Amps main switch |
| 42 | Supply of 32 Amps fuse carrier |
| 43 | Supply of 3 Kva capacitor |
| 44 | Provision of earth link |
| 45 | Supply of GI starter box |
| 46 | Supply of GI Meter box |
| 47 | Supply of wooden starter board |
| 48 | Supply of wooden meter board |
| 49 | Supply of 7/20 copper wire |
| 50 | Arial board |
| 51 | E B Service pipe set |
| 52 | 50mm borewell clampset |
| 53 | Supply and delivery of borewell submersible pumpset with vertical type with all accessories with latest FS 8034 in general for the following duty conditions the pumpset should have diagonally balanced bronze impler and stainless shaft for motor and pump and directly coupled to a suitable capacity continuous rated three phase fifty cycles 22/440 volts AC supply motor should be as per ISI with upto date amendment. The starter winding should be made from high conductivity PVC insulated 3 core flat copper cable of suitable size of work Duty 125 PM x 150 M head., Supply and delivery of power coated MV panel incorporating switches and one on air break automatic star delta (FASD) Starter (have condenser ) Suitable for the above motor with suitable ammeter, voltmeter, single phasing cum dry running preventor, point lamps pneumatic timber suitable for 240V – 440V Providing termination @ TNEB Meter to MV panel board as per IE rules and as directed by Corporation officers. |
| 54 | Labour for the erection of submersible pumpsets in borewell including fixing and jointing submersible cable with proper claps upto the starter to the required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauges upto exterior wall of the pump room and erection of panel board consisting of TPICN, Switches starter, Voltmeter, Ammeter 3 pilot (including lamps) capacitor, single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules including construction of earth pits with earthing materials as per rules etc. complete testing pumpsets on trial run 30 days and as directed by Corporation officers |
| 55 | Supply fo 4mm2 x 3 core copper insulated flat cable |
| 56 | Supply and fixing of 2x6Sqmm PVC LTUG armound cable post |
| 57 | Supply and fixing of face glass for wall surface and all fitting charges and transport charge and fixing charges. Etc complete. |
| 58 | Supply of border plants |
| 59 | Supply and fixing of Sprinkler |
| 60 | Supply and planting of special type of plant |
| 61 | Supply and fixing of designing fabrication,Powder coating, Assembling wring testing and supply of the Double door type EB Metering panel board 3 ph/63 A 1 no. ( RAIN PROOF MODEL) as per dept. instruction etc.complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender