Tender For Repair & Imporvement Works Of Indoor Stadium In Ward No.13, North Zone,Coimbatore Corporation Roc No.5433/2026/Md2
Tender Value
16.40 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
16400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Imporvement Works Of Indoor Stadium In Ward No.13, North Zone,Coimbatore Corporation Roc No.5433/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Hire charges for JCB including all cost of materials, labour charges , etc completed as per the direction of the departmental officer in charges. |
| 2 | Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers (Local Rate) |
| 3 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3 |
| 4 | Conveyance the excess earth or earth not suitable for refilling, dumping and spreading, levelling of the same at places of dump approved by departmental officers and as directed including lorry hire charges, labour for loading, unloading, spreading, leveling, making approaches for areas of dumps etc., complete. |
| 5 | Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 ) |
| 6 | Supply and erecting shuttering including necessary supports for plane surfaces such as RCC footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. |
| 7 | Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2 |
| 8 | Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts. |
| 9 | Reinforced Cement concrete 1:1.5:3 (one cement, one and half M Sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 10 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x 23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m3 |
| 11 | Wall plastering for using cement mortar 1:5(One part of cement, Five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights. |
| 12 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. (Sl.No.395) |
| 13 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 14 | Supplying and filling in foundationand basement with Well Gravel inlayers of not more than15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 15 | Providing and fixing Solid panel PVC door with frame complete as per direction of departmental officers |
| 16 | Painting two coats for Interior surfacewith approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.394) CCMC SOR-25-26 Pg.no-12 |
| 17 | Painting two coats for Exterior surfacewith approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.404) CCMC SOR-25-26 Pg.no-12 |
| 18 | Wiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch in flush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point |
| 19 | Supply and fixing of fancy glass shade and 9W CFL for Bulk Head SD 79 |
| 20 | Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 440 |
| 21 | Supply and fixing of 48W LED street light fitting with LED with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting (SD 457) |
| 22 | Supply and fixing of 1200 mm (48\\")sweep AC ceiling fan complete with stepped electronic 300 W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") Electrical SOR-25-26 Pg.no-47 |
| 23 | Supply and fixing of 1.0 HP Submersible Pump |
| 24 | Supplying and fixing in position Indian water closet of size 580X440mm,white glazed earthen ware of approved quality with 'P' trapor 'S' trap confirming to IS:2556- Part XIIwith sand cushion and forming flooring alround the closetusing 40mm broken brick jelly inlime concrete 1:2:5(onepartof lime, twopartsof sand and five parts of brick jelly)100mm thick and finishing the top to required slope and including givingnecessary connection to cast iron soil pipes/PVCpipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion tooriginal condition without leakage etc.,complete complying with standard specification sand as directed by the departmental officers. |
| 25 | Supply and fixing of PVC Tap Heavy Type 20mm dia |
| 26 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of 90mm dia having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications |
| 27 | Supply and fixing PVC Water Tank as per directed by the departmental officers PWD SOR-25-26 Pg.no-92 |
| 28 | Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 Galvanised iron corrugated sheets (including 15 cm. Lapping) 0.8mm thick 80 Nos.of 20mmX6mm G.Ibolts and nuts and limpet washers; 20 Nos. of hook bolts and nuts (of size required)and washers or screws, if wooden batterns (CBE SOR 2025-26(Page no:65) |
| 29 | Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamp sand screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brickwork and plastering wherever necessary with necessary scaffolding charges. |
| 30 | 20mm dia |
| 31 | 25mm dia |
| 32 | 32 mm dia |
| 33 | 110 mm dia |
| 34 | 75 mm dia |
| 35 | Supply and Delivery of PVC specials as per directed by the departmental officers PWD SOR-25-26 Pg.no-159 |
| 36 | Coupler |
| 37 | 25mm dia |
| 38 | 32mm dia |
| 39 | Elbow |
| 40 | 25mm dia |
| 41 | 32mm dia |
| 42 | 25mm dia |
| 43 | 32mm dia |
| 44 | 25mm dia |
| 45 | 32mm dia |
| 46 | End cap |
| 47 | 25mm dia |
| 48 | 32mm dia |
| 49 | Supply and fixing of Vinyl board |
| 50 | Supply and installation of Synthetic Indoor Badminton Court Flooring(PVC/PU)with Professional marking and finishing.6mm of Rubber cushion and 4.5mm of Synthetic PVC Flooring Mat etc.as per directed by the departmental officers (Low quotation) |
| 51 | Supply and Installation of Vinyl Material Thickness of 10mm with approved qty as per directed by the departmental officers (Low quotation) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender