Tender For Restoration Of Road Cut Surface For Laying Ugss Pipeline (Kavunad Alayam And Thudiyalur- Zone Vii)From Rhs - Chainage 19/60Km To 21/00 Km (Mettupalayam Road)Nh 181 In Coimbatore City Municipal Corporation. Roc No.5300/2026/Md2
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
11 days left
EMD
49500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Road Cut Surface For Laying Ugss Pipeline (Kavunad Alayam And Thudiyalur- Zone Vii)From Rhs - Chainage 19/60Km To 21/00 Km (Mettupalayam Road)Nh 181 In Coimbatore City Municipal Corporation. Roc No.5300/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork Excavation And Deposting on Bank With Initial Lead of 10m And Initial Lift of 2m In Hard Stiff Clay Stiff Black Hard Shales Muram Gravel Stoney Farth And Earth Mixed With Small Size Boulders And Hard Gravell Soil SS 20B |
| 2 | Removal of Excavated Fxcees Earth away from the site to 5 K.M including loading and transportation charges etc, complete as per standard s cvification. Por 1M3 |
| 3 | Granular Sub-base with close Graded Material (Table:400-1) Plant mix Method (Contruction of granular sub-base by providing clase graded material, Mixing in mechanical mix plant at OMC , carriage of mixed material to work site , spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density , complete as per clause 401 |
| 4 | Wet Mix Macadam laying using by Paver (Providing, laying, spreading, and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to the site, laying in uniform layers with a paver in sub-base/ base course on well-prepared surface and compacting with vibratory roller to achieve the desired densi . |
| 5 | Prime Coat WMM Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.7kg/sq.m usin mechanical means. |
| 6 | Tack coat on 2.5 Kgs / 10 sqm (Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for }Osquare meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-S5 Specifications) |
| 7 | Tack coat on 2 Kgs / 10 sqm (Providing and laying tack coat of 2kgs/10 sqm over the B1 surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH S vecifications |
| 8 | Dense Graded Bituminous Macadam -I (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4.0 per -cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No.505 complete in all ressects 5075mm |
| 9 | Bituminous Concrete Grading - II (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects (30mm - 40mm ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender