Tender For Repairing Of Five Nos. Conveyor Pulley (Pcc 36A, Pcc 58A, Pcc 50A, Pcc 51A, Pcc 59A) Of Different Size And Two Nos. Conveyor Drum (Pcc 128, Pcc 112) Of Mic, Jhanjra Project Colliery
Tender Value
5.58 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
8 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing Of Five Nos. Conveyor Pulley (Pcc 36A, Pcc 58A, Pcc 50A, Pcc 51A, Pcc 59A) Of Different Size And Two Nos. Conveyor Drum (Pcc 128, Pcc 112) Of Mic, Jhanjra Project Colliery
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of PCC-50A & 51A |
| 2 | Welding Rod of ESAB make duroid 250(4mm) 5 Packets |
| 3 | DA & Oxygen and Grease 10 Kgs |
| 4 | Labour Cost for dismantling,welding,Gas cutting,Preheating,Grinding,Machining,02 Nos,New keyway making through slot cutting in both side boss and again assembling complete Drum |
| 5 | Checking Static balancing of the Drum and making it proper after necessary fabrication |
| 6 | Colour painting in complete Drum for making rust proof |
| 7 | Repairing of PCC-59A |
| 8 | DA & Oxygen for Preheating |
| 9 | Dismantling Charges |
| 10 | Making of new shell cost; of Raw material of 16mm thick MS Plate rough weight; dia 600mmx1400mm long |
| 11 | MS Plate Bending |
| 12 | welding of above mentioned MS plate |
| 13 | Machining of above mentioned MS Plate for making new shell as in desired shape and size |
| 14 | fitting of complete Drum set including side plates,boss |
| 15 | checking Static balancing of the Drum and making it proper after necessary fabrication |
| 16 | painting of complete drum by oil Paint for making of rust proof |
| 17 | Repairing of PCC-36A |
| 18 | DA & Oxygen for Preheating |
| 19 | Dismantling Charges |
| 20 | cutting both side flanges & Boss(hub) by DA & Oxygen gas |
| 21 | Making of new flanges of Raw Material (Mild Steel)for making both side ne flanges ,rough Weight:se 500 mm dia&18mm thick plate including 10% as machining allowance |
| 22 | plate welding (flange both side)by groove cutting |
| 23 | Machining and rectification of 2 Nos boss after removing old side plates |
| 24 | Making of new stiffness: making 08 Nos new stiffness odf size 180mmx140mmx16mm by raw material M.S plates including 10% as cutting and machining allowance |
| 25 | Fitting of complete drum set including side plates,boss along with 08 nos stiffness |
| 26 | checking static balancing of the drum and making it proper after necessary fabrication |
| 27 | painting of complete drum by oil paint for making of rust proof |
| 28 | Repairing of PCC-58A |
| 29 | Raw Materials (EN24 Forged) for Drum shaft 130mm Diax1800mm Long |
| 30 | Annealing |
| 31 | Charges for machining of the complete drum shaft to the finished size |
| 32 | Heat Treatment |
| 33 | Dismantling of old broken shaft by hydraulic pressure |
| 34 | checking static balancing of the drum and making it proper after necessary fabrication |
| 35 | colour painting in complete Drum |
| 36 | Repairing of PCC-128 & PCC-111 |
| 37 | PCC 128,Making of New shell supply of raw matrial of 20mm thick M.S Plate rough weight;Dia 400mmx1600mm long |
| 38 | Supply of M.S Plate Bending |
| 39 | Supply of Welding rod of EASAB make Durodi (4mm) |
| 40 | Supply of DA & Oxygen |
| 41 | Supply of Welding of above mentioned M.S Plate |
| 42 | Supply of Machining of above mentioned M.S Plate for making new shell as in desired shape and size |
| 43 | Making of New stiffness;supply of making 08Nos,new stiffness of size 180mmx140mmx16mm by Raw material M.S Plates including 10% cutting and machining allowances |
| 44 | Labour supply for dismantling,welding,gas cutting,preheating,grinding,machining,new keyway making through slot cutting in both side boss machining complete drum |
| 45 | Supply of checking static balancing of the drum and making it proper after necessary fabrication |
| 46 | Supply of painting of complete drum by oil Paint for making of rust proof |
| 47 | PCC 111,Making of New shell;supply of raw material of 20mm thick M.S Plate rough weight;Dia-800mmx1400mm Long. |
| 48 | Supply of M.S Plate Bending |
| 49 | Supply of welding rod of ESAB Make duroid 250/4mm |
| 50 | Supply of DA & Oxygen |
| 51 | Supply of welding of above mentioned M.S Plate |
| 52 | Supply of machining of above mentioned M.S Plate for making new shell as in desired shape and size |
| 53 | Labour supply for dismantling,welding,gas Cutting,preheating,grinding,machining,02 Nos.new keyway making through slot cutting in both side boss and again assembling complete drum |
| 54 | supply of checking Static balancing of the Drum and making it proper after necessary fabrication |
| 55 | Supply of painting of complete drum by oil Paint for making of rust proof |
| 56 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender