Tender For R&M Of Township (Renovation Of Buildings (Rb & Nrb) In Cisf Complex In Bhel Township, Haridwar)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Nov 2026
5 days left
EMD
49285
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R&M Of Township (Renovation Of Buildings (Rb & Nrb) In Cisf Complex In Bhel Township, Haridwar)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Oct-2026 | Date extension 2 | Date | 07-Nov-2026 |
| 2 | 27-Oct-2026 | enhance more participation | Date | 30-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of materials by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish, earth, manure or sludge and excavated rocks:: Lime, moorum, building rubbish:1 km (1.1.1/62) |
| 2 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Unit:cum( S.l.No. : 5.3) Page No.: 96 |
| 5 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: :Weather shade, Chajjas, corbels etc., including edges Unit:sqm (5.9.5/97) |
| 6 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . :Cold twisted bars ( S.l.No. : 5.22.3) Page No.: 99 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.: Granite of any colour and shade:Area of slab upto 0.50 sqm Unit:sqm ( S.l.No. : 8.2.2.1 ) Page No.: 128 |
| 9 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.:Granite work Unit:metre ( S.l.No. : 8.3.2 ) Page No.: 128 |
| 10 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Unit:metre ( S.l.No. : 8.4) Page No.: 128) |
| 11 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Unit:each ( S.l.No. : 8.5) Page No.: 128 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Unit:sqm ( S.l.No. : 11.36) Page No.: 192 |
| 13 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. Unit:sqm ( S.l.No. : 11.40) Page No.: 193 |
| 14 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).:Size of Tile 600x600 mm Unit:sqm( S.l.No. : 11.47.2 ) Page No.: 194 |
| 15 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.:Size of Tile 1000x1000 mm Unit:sqm ( S.l.No. : 11.48.4 ) Page No.: 194 |
| 16 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm(DSR -2012, S.I.11.49.2/194) |
| 17 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).:Size of Tile 1000x1000 mm Unit:sqm( S.l.No. : 11.49.4 ) Page No.: 194 |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 19 | Providing gola 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : :In 75x75mm deep chase.( S.l.No. : 12.21.1)/207) |
| 20 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. ( S.l.No. : 12.22/ 207) |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.:110 mm diameter ( S.l.No. : 12.41.2 ) Page No.: 210 |
| 22 | Providing and fixing on wall face unplasticised - PVC 110 mm Coupler moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.1.2/210) |
| 23 | Providing and fixing on wall face unplasticised - PVC Bend 87.5°,110 mm moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.5.2/210) |
| 24 | Providing and fixing on wall face unplasticised - Shoe (Plain)°,110 mm SHOE moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.6.2/210) |
| 25 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm (12.43.2) |
| 26 | 12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)(Sl. No. 13.1.2/222) |
| 27 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)(Sl. No. 13.2.2/222) |
| 28 | 6mm cement plaster to ceiling of mix:1:3 (1 cement : 3 fine sand).(S.I. No. 13.16.1/223) 1:3 (1 cement : 3 fine sand) |
| 29 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead:With cement mortar 1:4 (1 cement : 4 fine sand) with cement mortar 1:4 (1 Cement : 4 fine sand)( S.l.No. : 14.1.1) Page No.: 237) |
| 30 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum |
| 31 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.(Sl. No. 15.3/248) |
| 32 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (S.I.No. 15.56/253. |
| 33 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar cum 566.60 |
| 34 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with:Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 (S.I. 22.8.1 ) |
| 35 | Grading roof for water proofing treatment with 1:2:4(S.I.No. 22.14.1/366). |
| 36 | Supply and fixing of profiled sheeting 1000-1020 mm cover width, 28-30mm high 5 to 6 crests manufactured out of high tensile Bare Galvalume steel (AZ-150 gsm. Aluminium – zinc alloy metallic coating of total both sides 550 MPA yield stress). The minimum Basic Material Thickness (BMT) should be 0.47 mm and TCT should be 0.50 mm. The sheet shall have wide pans with required nos of small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side laps to prevent leakages. The sheet shall be fixed by means of Galvanised self supplied in lengths maximum up to 6-12 Mtrs long to suit site dimensions. |
| 37 | Cleaning and uprooting of trees root, grass, brush , and saplings of girth upto 30 cm measured at a height of 1.5 m all types non residential buildings roof slab / chhjas,up to above plinth level upto floor v level, and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. all required T&P and safety equipment, safety belt etc. required for proper completion of the work as per the direction of Engineer I/c . |
| 38 | Providing and fixing powder coated aluminium door / window shutters made with 3 mm thick aluminium composite sheets, including providing and fixing all the fittings like hinges / pivots, epdm rubber / neoprene gasket, all complete as per requirement and direction of engineer-in-charge. |
| 39 | Water proofing work: Preparation of surface by cleaning and scrapping, repairing the roof with cement mixed with water-proofing material, laying fibre mesh with polymer based primer and applying minimum two coats of acryclic water proofing compound of approved brand, all complete as per requirement and direction of Engineer-In-Charge. (All the materials, labour and T&P required to complete the work are to be arranged by the contactor.) |
| 40 | Providing & fixing M S angle chaukhat: Dismantling of old chaukhat, fixing new chaukhat with hold fasts, hinges etc.(ISA 40x40x5 mm & 20 mm M S flat) including 1:6 brick masonry and 15 mm plaster 1:6, applying a priming coat of approved steel primer, paint and touch up the walls to matched the existing colour as per the site requirement and instruction of Engineer-in-Charge. (All Material like MS angle, MS Flat, Cement, brick, mortar etc and T&Ps required to complete the work is in the scope of contractor.) |
| 41 | Providing & fixing M S door shutter : Fixing new Steel door shutters ( ISA 40x40x5 mm frame, 2 mm M S sheet, 10 mm M S square bar) and applying a priming coat of approved steel primer and paint with all the attachments, locking systems as per the site requirement and instruction of Engineer-in-Charge. (All Material like MS angle, MS sheet etc and T&Ps required to complete the work is in the scope of contractor.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Oct 30, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender