Tender For Deep Boring In Narkopi Ward No. 8 Under Dumdumi Panchayat (2) Deep Boring In Narkopi Ward No. 4 Under Dumdumi Panchayat (3) Installation Of Hand Pump Near Education Hub Coaching Center Under Madaiydih Panchayat.
Tender Value
5.33 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
3 days left
EMD
10700
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deep Boring In Narkopi Ward No. 8 Under Dumdumi Panchayat (2) Deep Boring In Narkopi Ward No. 4 Under Dumdumi Panchayat (3) Installation Of Hand Pump Near Education Hub Coaching Center Under Madaiydih Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost of transportation of rig machine annd other vehical up to Site.(a) From 0.00 M to 50.00 M below G.L. |
| 2 | (b) From 51.0 M to125.00 M |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 4 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 5 | providing and fixing M.S clamp of required dia to the top ofcasing/housing pipe of tubewell as per IS: 2800(part I) including necessary bolts & nuts of required size complete 200 mm clamp |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.40mm nominal outer dia pipe |
| 7 | Construction for 115/125 mm dia drilled tube well for drilling in all kinds of soil and rock in rural area for installation of India mark - II, hand pump with D.T.H. Rig macchine all complete including supplying all materials, labours, tools, drilling, rig air compressor equipment as well as fuel, lubricant for making 125 mm / 115 mm dia boring and cost of transporting charges of rig machine and other vehicle up to site of the work as per specification and direction of E/I.(M1037)(a) Up to 30 m depth below G.L. in Rural Areas |
| 8 | (b)Beyond 30mto 50 m depth below GL in Rural Areas |
| 9 | Supplying all materials, labours, equipmemnt for lowering 125 mm dia blue UPVC pipes casing pipe as casing for protecting the sites from halling during the process of drilling all complete including carriage to work.(M1041) |
| 10 | Supplying labour, cement and calcium cloride or bentonite solution and equipments for groating to casing pipe after lowering in the bore well etc. all complete as per specification and direction of E/I.(M1043) |
| 11 | Supplying all tools equipment and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per specification and direction of E/I.(M1042) |
| 12 | Supplying labour and equipments including 125 mm dia G.I. Cap and fitting fixing over the tube well properly and taking it out as per direction of E/I.(M1044) |
| 13 | B. CIVIL PORTION :Supplying all tools equipments, labours and lowering 32 mm dia G.I. suspension pipe in 3 m length in the drilling bore of tube well etc. all complete job as direction of E/I. |
| 14 | Providing labour for fitting and fixing deep well cylinder jointing materials, crome lether bucket all tools and plant etc. required for the job for low water level all complete job as direction of E/I. |
| 15 | Providing all labours, fitting and fixing of India mark - II, hand pump including supplying all tools and plant for the all complete job as direction of E/I. |
| 16 | Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) circular platfarm around each drilled tube well including 12 mm thicks cement plaster (1:4) with neat (1.5 mm) cement punning over exposed surface as per UNICEF design etc. all complete job as direction of E/I. |
| 17 | Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) Drain including 12 mm thicks cement plaster (1:4) with neat (1.5 mm) cement punning over exposed surface as per UNICEF design etc. all complete job as direction of E/I. |
| 18 | C. COST OF MATERIALS :Cost of standard. I.S.I. marks deep well hand pump for India mark - II, confirming to I.S.I : 15500 (Part - II) / 2004 with latest revision including12mm x 3 meter long 8 no. connecting rod made of bright bar electro galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe |
| 19 | Cost of 32 mm dia G.I. medium quality pipe 3 m long screwed at bath ends with seamless socket as per I.S. : 1239 (Part - I) / 2004 with letest ammendment including all taxes, royalty and contractor profit etc. |
| 20 | Cost of (125 mm dia, 140 mm O.D.) blue UPVC casing pipe. As per I.S.I 12818/2016 CML no.-5543459 |
| 21 | Add cost for Signboard and Photographs |
| 22 | Goods & Service Tax (G.S.T. 18%) |
| 23 | 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender