Tender For Addn/Altn To Or Gym At 101 Area, Shillong Stn And Addn/Altn To Main Gate At Csd Complex Of Hq 101 Area And Provn Of High Mast Light At Quarter Guard Gate Of 39 Coy Asc And Provn Of Attach Toilet Cum Bathroom At Mes-15 Under Ge Shillong
Tender Value
49.16 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
98320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Or Gym At 101 Area, Shillong Stn And Addn/Altn To Main Gate At Csd Complex Of Hq 101 Area And Provn Of High Mast Light At Quarter Guard Gate Of 39 Coy Asc And Provn Of Attach Toilet Cum Bathroom At Mes-15 Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over area, n exc 1.5 deep and and getting out; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed. |
| 3 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in complete all as specified and directed. |
| 4 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick complete all as specified and directed. |
| 5 | M & L for Plain Cement concrete 1:4:8 Mix, type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for fair finished flat surface complete all as specified and directed. |
| 7 | M & L for reinforced cement concrete (Nominal Mix) 1:1.5:3 Mix, type A-1, (using 20 mm graded crushed stone aggregate) as in foundation , raft footing etc complete all as specified and directed. |
| 8 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc fair finished surfaces of concrete flat complete all as specified and directed. |
| 9 | M & L for reinforced cement concrete 1:1.5:3 type A-1, (using 12mm graded stone aggregate) (nominal mix) as in beams,cantilever,bressumers. lintel etc complete all as specified and directed. |
| 10 | M &L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | All as per item No. 10 here in above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 12 | M&L for 75 mm thick cement concrete type 1:4:8 Mix, type D2 (using 40mm graded crushed stone aggregate) as in Sub-base of floor finishes complete all as specified and directed. |
| 13 | M&L for rendering 10mm thick using cement mortar 1:3 on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item of BOQ. |
| 14 | M&L for pre-cast PCC solid block walling with cement concrete 1:3:6 Mix, (using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick using Cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 17 | M&L for applying two Coats of oil bound distemper over and including a coat of primer incl prepration of newly plastered surfaces on walls complete all as specified and directed. |
| 18 | M&L for applying two Coats of cement base paint over and including a coat of primer incl prepration of newly plastered surfaces on wall complete all as specified and directed. |
| 19 | M&L for Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed. |
| 20 | S&F 75mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4 Mix) complete all as specified and directed. |
| 21 | S&F Grating 125 mm size of PTMT (Minimum weight 40gms) complete all as specified and directed. |
| 22 | M&L for Non Skid coloured ceramic tiles of size 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 23 | S&F GI steel tubing, medium grade, galvanised, 15mm bore with all fittings and fixed complete to wall and ceiling or laid under in floor etc complete all as specified and directed. |
| 24 | S&F GI tubing, medium grade, galvanised, 20mm bore with all fittings and fixed complete to wall and ceilings or laid in floors etc complete all as specified and directed. |
| 25 | M & L for 25 mm thick PCC, 1:2:4 Mix, type B-1 (using 20mm graded crushed stone aggregate) as in Sub base of flooring complete all as specified and directed. |
| 26 | S & F Moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 27 | M & L for Glazed ceramic Coloured Tiles 300x450x7mm / 300x600x7 mm thick as in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick in CM 1:4 screed, complete all as specified and directed. |
| 28 | S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 29 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 30 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and directed. |
| 31 | S&F frosted glass, 5.50mm thick, ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed |
| 32 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | S&F PVC (SWR) pipes 100/110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 35 | S&F PVC (SWR) bends 100 /110mm dia any radius complete all as specified and directed. |
| 36 | S&F for PVC (SWR) bends 75mm dia any radius complete all as specified and directed. |
| 37 | S&F PVC (SWR) junction single/double equal or unequal 75mm dia complete all as specified and directed. |
| 38 | S&F PVC (SWR) junction single/double, equal or unequal 100/110mm dia complete all as specified and directed. |
| 39 | S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed. |
| 40 | S&F Factory made single extruded WPC, Wood Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 42 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed.. |
| 43 | S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed. |
| 44 | S&F mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed. |
| 45 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 46 | S&F bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed. |
| 47 | S & F Stop Valve, 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified and directed. |
| 48 | S&F brass chromium plated tubuler towel rail, 20mm dia, D type, ISI marked, 60cm long between flanges including a pair of CP brass brackets, complete all as specified and directed. |
| 49 | S&F CP connection pipe of 15mm x 450mm with CP check nuts with washers, complete all as specified and directed. |
| 50 | S & F 900mmx600mm bevelled edge looking mirror of selected quality glass,fancy type with 100 mm border fixed with four Nos stainless steel brackets with stainless steel screws and cup washers complete all as specified and directed. |
| 51 | S&F vitreous China clay table top WHB of make Jaquar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware complete all as specified and directed. |
| 52 | S&F 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including complete all as specified and directed. |
| 53 | S&F Soap dish holder all as specified and directed of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc /Parryware/Hindware complete all as specified and directed. |
| 54 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and directed . |
| 55 | M&L for 10 mm thick 3D designer type PVC insulation panel with EPS stuck 1mm with printed PVC sheet as in ceiling/wall complete all as specified and directed. |
| 56 | S&F shower panel made of black tampered glass body with 2 ABS body massage jet and over head shower with shower arm incl hand shower with flexible hose and brass spout and glass shelf as per Jaquar Cat Part No JPL-BLK-GO842JAX or equivalent in Parryware/ Cera complete all as specified and directed. |
| 57 | S&F Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing union and cap and fixed complete all as specified and directed. |
| 58 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 59 | S&F WPC board, factory made 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cbm one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or 50 mm thick PVC sheet lipping at all 4 edgesusing binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company complete all as specified and directed.Make : Rajshree Plastiwood, Sintex, Vikas Plastiwood |
| 60 | S&F stainless steel alloy handles fabricated type anodised of size 150 mm complete all as specified and directed. |
| 61 | M & L for the sensys 8645i type hinges complete all as specified and directed. |
| 62 | M&L for 12 mm thick toughened glass ordinary quality and glazing with wooden beading in square exc 0.5 sqm in each pane including all necessary items complete all as specified and directed. |
| 63 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 64 | S&F stainless steel door handles, fixed to toughened glass complete all as specified and directed. |
| 65 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 66 | S & F for Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware complete all as specified and directed. |
| 67 | S& F goeka Stainless steel Flip-up-Grab bar,space saving design,304 rust resistant construction,Anti slip grip,white,24 inch Mobility assistance,toilet & Bed side bathroom safty bar for elderly complete all as specified and directed. |
| 68 | S& F for Monit Stainless steel -Grab bar,space saving design, Anti slip grip,white,24 inch Mobility assistance,toilet & Bed side bathroom safety bar for elderly complete all as specified and directed. |
| 69 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed. |
| 70 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed. |
| 71 | Dismaltling wrought iron or MS work of any description complete all as specified and directed. |
| 72 | Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 73 | M&L RCC 1:1.5:3 Mix ( nominal mix), Type A1 (Using 20mm graded crushed stone aggregates ) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 74 | M&L for RCC (nominal mix) type A1,1:1.5:3 Mix (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 75 | M&L for Fair finished flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 76 | M&L for Fair finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. complete all as specified and directed. |
| 77 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed. |
| 78 | M&L for rounding to edges of stone slabs and making bull nose one edge, such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 79 | M&L for Rendering, 15 mm thick in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 80 | S&F rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and confirming to Fe-410 W(Gde E-250) quality complete all as specified and directed. |
| 81 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 82 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 83 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and directed. |
| 84 | M&L for preparation of new plastered/concrete surfaces of walls or ceiling and priming with alkali resistant primer paint and applying two coats of weather coat exterior paint with roller etc complete all as specified and directed. |
| 85 | M&L prepairing new ceiling surfaces, priming with alkali resistant primer paint and applying two coats of cement based paint complete all as specified and directed. |
| 86 | M&L for preparing old plastered or unplastered surfaces of wall and distempering with 1st quality oil emulsion distemper white or tinted, two coats complete all as specified and directed. |
| 87 | M&L for preparing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and directed. |
| 88 | M&L for 18/19mm thick block boards, grade 2 quality, in terior grade, decorative type with decorative face veneer on both face complete all as specified and and directed. |
| 89 | S&F Power coated, anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door 250/300mm long, hinges , anodised aluminium snap beading screws etc complete all as specified and directed. |
| 90 | S&F 10mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and directed. |
| 91 | M&Lfor rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and directed. |
| 92 | S&F 12mm thick (7 no of ply) plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 93 | M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved by GE, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 94 | S & F continuous (piano) hinges of 30mm width of flip (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 95 | S&F 4-lever brass mortice locks for drawer/cupbords grade I size 50 mm complete all as specified and directed. |
| 96 | S&F 4-lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 97 | S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed. |
| 98 | S&F aluminium anodised barrel tower bolts of size 100 mm and fixed complete all as specified and directed. |
| 99 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 100 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 101 | S&F 12 thk seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 102 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. Complete all as specified and directed. |
| 103 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including PVC Conduit 20 mm dia concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/Fan point controlled by one switch. |
| 104 | Description all as per Srl item No.103 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 105 | Description all as per Srl item No.103 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 106 | Description all as per serial item No 103 here in before but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 107 | Supply and fixing modular switch 1 way 6 A, 1 Module, 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 108 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module, with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 109 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 110 | Supply and fixing modular switch 16A , 1 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 111 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, 6500/3000K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and direcetd.Note: (i) All fittings must be mentioned CA No. and date of installation with permanent marker |
| 113 | Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 114 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 115 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including cutting holes and making surfaces good including white colour paint on wall surface complete all as specified and directed. |
| 116 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation complete all as specified and directed. |
| 117 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to wall of size 20mm dia complete all as specified and directed. |
| 118 | Supply and Fix Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed |
| 119 | Supply and fix bib tap 15mm dia, outer thread, cast copper alloy chromium plated complete inclusive 15mm dia GI socket and all incoming water connection and testing for entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 120 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed |
| 121 | Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed |
| 122 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC Conduit 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 123 | Supply & Fixing of up down LED light 2X6 Watt with CCT 3000K warm white, IP 54 Dia Cast aluminium housing, transparent tempered glass diffuser- Jaquar Cat Part No. - QNA-BLK-LWWL04206XH or equivalent in CG/ Wipro/ Havell complete all as specified and directed. |
| 124 | Supply and fixing LED flood light 210 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp fixed on wall/roof/pole/floor/highmast with the help of nuts, bolts , washers and clamps etc complete all as specified and directed. |
| 125 | Supply & fixing in repair Gate / Post Top lantern LED lights fitting of capacity 40 W die-cast aluminium body, 40 watt LED 3000/5700K and toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed. |
| 126 | Supply and fixing submain wiring for DBs/ Power Point, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC casing caping shall be measured as one RM |
| 127 | S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and directed. |
| 128 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed complete all as specified and directed. |
| 129 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 130 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 131 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Please Enable Macros to View BoQ information |
| 132 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender