Tender For Providing Lawn & Garden, Statue With Pedestal And Fountain Arrangements For The Work Of Construction Of Memorial Pavillion For 22 Prison Martyrs At Salem In Salem District.
Tender Value
29.98 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
13 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Lawn & Garden, Statue With Pedestal And Fountain Arrangements For The Work Of Construction Of Memorial Pavillion For 22 Prison Martyrs At Salem In Salem District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 3 | Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 4 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 5 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitumachine mix concrete adopting weighing batch method in accordance with IS 456using 20mm and down graded hard broken granite stone jelly for all RCC items of work swith minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55,including admixture (plasticiser / super plasticiser) in recommended proportions as perIS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stonejelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jellyand with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also includinglaying, vibrating with mechanical vibrators, finishing, curing, etc. and providing ixtureslike fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra,etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 6 | In foundation and basement |
| 7 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 8 | In foundation and basement |
| 9 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Ruby Red, Raw Silk and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 10 | Double Nosing with best approved quality fine polished Natural Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Ruby Red, Raw Silk and similar varieties with machine cut edges with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 11 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Supplying and fixing of Statue fixing with cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 13 | Supplying and fixing of Water Sprinkler arrangements with all accessorices, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 14 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification. |
| 15 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level. External Water Supply Arrangements using UPVC pipes and UPVC specials- Below Ground Level |
| 16 | 25mm dia UPVC Pipe |
| 17 | 32mm dia UPVC Pipe |
| 18 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 19 | 25mm Dia Union |
| 20 | 32mm Dia Union |
| 21 | 25mm dia Elbow. |
| 22 | 32mm dia Elbow. |
| 23 | 25mm dia Tee. |
| 24 | 32mm dia Tee |
| 25 | 32X25 Reducer |
| 26 | 25x20 Reducer |
| 27 | 20x15 Reducer |
| 28 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 29 | Gun Metal Gate Valve of dia 25mm |
| 30 | Gun Metal Gate Valve of dia 32mm |
| 31 | Supplying and fixing erecting 3.00 HP ISI make bore well SUBMERSIBLE PUMPSET with required accassories for the 3.00HP ISI make3 phase electricmotar 2900rpm , 400/S.S. shaft cable of discharging 100 to 200 LPM against a total Head of 135m to 100m with ISI mark and an outlet of 50mm and suitable for 150mm dia bore well including supplying and fixing M.S. fabricated wall mounting Pannel board with internal wiring as per I.E. rules and necessary locking arrangements with suitable cutler and hammer type bush button automatic 10 HP texvel DOL starter - 1 no, suitable 15 Amp, TPIC switch, 0 to 500 v Voltmeter, 0 to 20 Amps Ammeeter, single phase preventer. pilot lamps with 3 bulps to indicate power supply and 50mm dia GI couplying - 2 nos, M. S. clamps - 2 nos, 2.5 Sq mm wire 3 core copper flat submergible cable, including Conveyance and Erection charges including required G. I. pecials, MR Tape Electrical connection charges., delivery pipe connection charges and other plumbing works including hire charges for Chain pully, tripod and other tools and trial run for three days etc., including labour charges complete complying as directed by the departmental officers. |
| 32 | Supplying and fixing erecting 2.00 HP ISI make bore well SUBMERSIBLE PUMPSET with required accassories for the 3.00HP ISI make3 phase electricmotar 2900rpm , 400/S.S. shaft cable of discharging 100 to 200 LPM against a total Head of 135m to 100m with ISI mark and an outlet of 50mm and suitable for 150mm dia bore well including supplying and fixing M.S. fabricated wall mounting Pannel board with internal wiring as per I.E. rules and necessary locking arrangements with suitable cutler and hammer type bush button automatic 10 HP texvel DOL starter - 1 no, suitable 15 Amp, TPIC switch, 0 to 500 v Voltmeter, 0 to 20 Amps Ammeeter, single phase preventer. pilot lamps with 3 bulps to indicate power supply and 50mm dia GI couplying - 2 nos, M. S. clamps - 2 nos, 2.5 Sq mm wire 3 core copper flat submergible cable, including Conveyance and Erection charges including required G. I. pecials, MR Tape Electrical connection charges., delivery pipe connection charges and other plumbing works including hire charges for Chain pully, tripod and other tools and trial run for three days etc., including labour charges complete complying as directed by the departmental officers. |
| 33 | Supplying and fixing wall mounting of Panel board with following accessories a.Suitable DOL type push botton automatic starter etc., complete. |
| 34 | Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 35 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 36 | Supplying, Filling and levelling of REDEARTH for Lawn areas for including og loading, unloading, transport charges etc complete ., complete complying with standard specification. |
| 37 | Supplying and laying MEXICAN CARPET GRASS TURFING in the site Prepared for lawn with watering and manuring and maintaining for 180days including cost of grass manure ..The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 38 | Supplying and planting of ORNAMENTAL Flowers or various variety and arranged in such a manner red soil including conveyance at site of works and planting at the places shown by the departmental officers including cost of manuring and maintaining for 90days etc.,.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers. |
| 39 | Barderplaints (Hemalis patten,Exora, Alamanda, Ujaniva) |
| 40 | Foliage Shrubs ( Clerodendron, Nicodia) |
| 41 | Hedge Plants ( Golden Dhurandha ) |
| 42 | Single Trunk Palm (Foxtail Palm) |
| 43 | Multi trunk palm (Areca palm) |
| 44 | Ground Covers ( Panthanus, BlackLilly, Landana purple, Ibiscus, Arali) |
| 45 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender