Tender For Replacement Of 150Mm Sluice Valves On Conveying Main Near Session Court In Pmc Area Of Pernem Constituency.
Tender Value
6.09 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
1 days left
EMD
12200
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of 150Mm Sluice Valves On Conveying Main Near Session Court In Pmc Area Of Pernem Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavation )/manual means in foundation pipelines trenches in all types of soft stratas comprising any of the materials such as soil ,silt, sand, clay ,gravels, moorum of all varietie, shingles .pebbles all types of conglomerates , laterite rocks ,ordinary rocks , weathered rocks and all such other materials as described under appendix A to these specification either in full or in parts as the case may be adopting any method as may be convenient or permitted inclusive of chiseling, wedging etc. in all conditions such as dry ,moist , foul saturated submerged etc. and as directed by the Engineer-in-charge etc. all complete in foundation pipeline trenches including dressing of sides, ramming of bottoms including getting out the excavated soil and disposal of surplus soil for all lead and all lifts including barricading, danger lighting guarding as per direction of Engineer-in-charge . |
| 2 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS : 14846 - 2000 having body door dome gland in graded cast iron to IS:210 Gr. FG 200Min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;150 |
| 3 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS INominal diameter in mm.d 150 |
| 4 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.;Flanged Socket Tail piece ( Flanged Adaptors);Nominal Dia in mm;150 |
| 5 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS : 14846 - 2000 having body door dome gland in graded cast iron to IS:210 Gr. FG 200Min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;250 |
| 6 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;250 |
| 7 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.;Flanged Socket Tail piece ( Flanged Adaptors);Nominal Dia in mm;250 |
| 8 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. C. I. Double orifice type air valveas per fig DS1 with in built isolating valve smallwith SS spindle and CI protective cap confirming to IS1 4845/2000 ( wirh latest ammendments).Low pressure large orifice chamber with vulcanite coated timber ball resting on moulded rubber seating and chamber having CI cowl protection.High pressure chamber shall have rubber coated timber ball as floathaving Float guides ;and LTB or SS orifice nipple The body seat ring shall be of LTB as per IS 318 LTB2 or of SS. All nuts /bolts shall be of carbon steel of SS. The flange shall be drilled and faced as per IS1538(part 4 &6) suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B);Dia in mm;80 |
| 9 | Supplying at store or at site of work cast iron specials for mechanical and push on flexible joints as per IS:13382 - 1992 including Sealing rubber gaskets (NR) CI compression glands and coated MS Nuts bolts.;Double Socket Branch Flange Tee;Nominal Dia in mm;150x150x80 |
| 10 | Supplying at store or at site of work cast iron specials for mechanical and push on flexible joints as per IS:13382 - 1992 including Sealing rubber gaskets (NR) CI compression glands and coated MS Nuts bolts.;Double Socket Branch Flange Tee;Nominal Dia in mm;250x250x80 |
| 11 | Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying and jointing true to line and level and perfect linking of jointsa Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. |
| 12 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST \\"D\\"\\" suitable to working pressure of 10 kg/sq. cm.;Nominal diamter in mm.;80\\" |
| 13 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge;Dia in mm;250 |
| 14 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge;Dia in mm;150 |
| 15 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;250 |
| 16 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;150 |
| 17 | Construction of masonry chamber 90x90x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm 120 mm 150 mm and 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with C.I. Surface box 100mm top dia 160mm bottom dia and 160mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 18 | Construction of masonry chamber 60x60x75cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4coarse sand) for sluice valves 50 to 80mm with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with C.I. Surface box 100mm top dia 160mm bottom dia and 160mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 19 | Construction of masonry chamber 120x120x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar1:4 ( 1 cement : 4 coarse sand) for sluice valve size beyond 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with C.I. Surface box 100mm top dia 160mm bottom dia and 160mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender