Tender For Repair And Renovation Of Dc Residence At Khanabal ( Balance Part) [Adv. Cost ₹ 10.46 Lacs (₹ 8.86 Lacs Exclusive Of Gst + Gst@18% ₹ 1.60 Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
2 days left
EMD
20920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Dc Residence At Khanabal ( Balance Part) [Adv. Cost ₹ 10.46 Lacs (₹ 8.86 Lacs Exclusive Of Gst + Gst@18% ₹ 1.60 Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | A1 – Boards & Laminates |
| 2 | 18 mm PRE-LAMINATED HDHMR BOARD – CARCASSSupplying 18 mm thick pre-laminated HDHMR (High Density High Moisture Resistant) board for carcass sides, top, bottom, partitions and shelves; density ≥ 850 kg/m³, formaldehyde emission class E1 or better, internal bond ≥ 0.8 N/mm², screw withdrawal (face) ≥ 1500 N, water absorption (24 h) ≤ 8%; melamine pre-laminated both faces. Measured as net finished panel area (wastage, cutting and handling deemed included in rate).Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 3 | 18 mm HDHMR BOARD – SHUTTERS & DRAWER FRONTSSupplying 18 mm thick plain HDHMR board for shutters and drawer fronts, density ≥ 850 kg/m³, E1 or better, calibrated thickness tolerance ± 0.2 mm, for hot-press lamination. Measured as net finished shutter area.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 4 | 8 mm HDHMR BACK PANELSupplying 8 mm thick pre-laminated HDHMR board for carcass back panels, housed in 8 mm routed groove; density ≥ 850 kg/m³, E1 or better. Measured as net back panel area.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 5 | 1.0 mm DECORATIVE HIGH-PRESSURE LAMINATE (HPL)Supplying and hot-pressing 1.0 mm decorative high-pressure laminate conforming to IS 2046 on the outer face of shutters, drawer fronts and exposed panels, with phenol-formaldehyde adhesive; scratch, stain and heat resistant; shade and texture as approved. Measured as net laminated area. Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 6 | 0.8 mm BALANCING LAMINATESupplying and hot-pressing 0.8 mm balancing / inner laminate on the inner face of shutters and drawer fronts to prevent warping. Measured as net laminated area.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 7 | 2 mm PVC/ABS EDGE BAND – SHUTTERSSupplying and applying 2 mm thick PVC/ABS edge band, colour-matched, on all four edges of shutters, drawer fronts and exposed shelf edges by automatic hot-melt edge-banding machine with end-cutting and radius trimming. Measured in running metres of edge.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 8 | 0.8 mm PVC EDGE BAND – CARCASSSupplying and applying 0.8–1.0 mm PVC edge band on carcass front edges and shelf edges by hot-melt edge-banding machine. Measured in running metres of edge.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 9 | A2 – Hardware |
| 10 | 35 mm CONCEALED SOFT-CLOSE HINGESSupplying and fixing 35 mm cup concealed clip-on hinges, 3-way adjustable, integrated hydraulic soft-close, nickel-plated steel, opening angle ≥ 110°, durability ≥ 50,000 cycles (EN 15570 Level 3), with mounting plates and screws. Minimum 2 nos. per shutter up to 900 mm, 3 nos. up to 1600 mm and 4 nos. above.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 11 | SOFT-CLOSE HINGES FOR ALUMINIUM-FRAME GLASS SHUTTERSSupplying and fixing soft-close concealed hinges suitable for narrow aluminium-profile glass shutters, 3-way adjustable, durability ≥ 50,000 cycles, with mounting plates.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 12 | ALUMINIUM PROFILE HANDLESSupplying and fixing anodised aluminium G-profile / J-profile or surface profile handles, length to suit shutter/drawer front, finish as approved, with concealed SS screws.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 13 | ADJUSTABLE CABINET LEGSSupplying and fixing adjustable PP/ABS cabinet legs, height range 100–150 mm, load ≥ 100 kg per leg, with plinth clips; 4 nos. per floor-standing unit.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 14 | PLINTH (KICK-BOARD) WITH SEALING GASKETSupplying and fixing clip-on plinth of 18 mm laminated board / aluminium, 100–150 mm high, with PVC sealing gasket at floor level. Measured in running metres.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 15 | CONCEALED WALL-CABINET HANGERS (PAIR)Supplying and fixing concealed 3-way adjustable cabinet hangers, load rating ≥ 65 kg per pair, with cover caps. One pair per wall-hung unit.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 16 | GALVANISED STEEL HANG-RAILSupplying and fixing galvanised steel hang-rail for wall cabinets, fixed with nylon anchors / expansion fasteners at ≤ 300 mm centres. Measured in running metres.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 17 | SHELF SUPPORTSSupplying and fixing nickel-plated metal shelf supports for adjustable shelves at 32 mm pitch; 4 nos. per shelf.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 18 | A3 – Accessories & Fittings |
| 19 | DOUBLE-WALL METAL DRAWER SYSTEMSupplying and fixing double-walled powder-coated steel drawer system (Innotech-type or equivalent), 500 mm nominal length, full-extension synchronised runners with integrated soft-close, dynamic load ≥ 40 kg, durability ≥ 50,000 cycles, 2-D front adjustment, with drawer bottom and back in 16/18 mm board. Per drawer.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 20 | CUTLERY INSERT TRAYSupplying and fixing PVC/ABS cutlery insert tray, cut to fit 900 mm drawer. Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 21 | SS 304 MASALA PULL-OUT (3-TIER)Supplying and fixing 3-tier masala / condiment pull-out basket in SS 304 (AISI 304), electro-polished, fully welded, on concealed bottom-mount full-extension soft-close runners, dynamic load ≥ 30 kg, suitable for 370 mm unit, with front fixing brackets.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 22 | SWING-OUT CORNER MECHANISMSupplying and fixing swing-out blind-corner pull-out mechanism with 2 nos. SS 304 / anti-slip coated baskets, load ≥ 12 kg per basket, soft-close and self-closing return, height-adjustable, suitable for 1150 mm corner unit, left/right hand as per site.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 23 | LIFT-UP FLAP FITTINGSupplying and fixing lift-up stay fitting (spring / gas-strut type) with power factor matched to flap weight, stop-at-any-position, integrated soft-close, mounted both sides of carcass, for 600 × 600 mm flap. Per set.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 24 | SS 304 GTPT DISH RACKSupplying and fixing SS 304 GTPT rack (glass, thali, plate & tumbler/cup holder), two tiers, electro-polished, fully welded, with removable ABS/PP drip tray, suitable for 800 mm wall unit. Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 25 | SS 304 TALL PANTRY PULL-OUT UNITSupplying and fixing SS 304 tall pantry pull-out frame with 5–6 tiers of baskets on heavy-duty full-extension soft-close top and bottom guides, rated load ≥ 50 kg, door-linked, suitable for 600 mm × 2100 mm unit.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 26 | A4 – Glass Work |
| 27 | 5 mm TOUGHENED GLASSSupplying and fixing 5 mm thick clear toughened (tempered) safety glass conforming to IS 2553 (Part 1), edges polished, for shutters and shelves of crockery unit, including EPDM gaskets / shelf supports. Measured as net glass area.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 28 | ALUMINIUM PROFILE FRAME FOR GLASS SHUTTERSSupplying and fabricating anodised aluminium glass-shutter profile frame with integrated handle profile, corner cleats and hinge-boring provision. Measured in running metres of frame perimeter. Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 29 | A5 – Fabrication & Installation |
| 30 | FABRICATION, ASSEMBLY, TRANSPORT & INSTALLATIONCNC cutting and line-boring (32 mm system), hot-press lamination, assembly with cam-lock connectors and dowels (nails, staples or visible face-screws not permitted), loading, transport to site, unloading, installation, levelling, alignment, scribing to walls, silicone sealing, cleaning and removal of debris, including shop drawings and 5-year warranty on carcass and hardware. Per cabinet unit installed.Quantity as per measurement sheet.All complete as per specifications and directions of the Engineer-in-Charge. |
| 31 | Part B Kitchen Appliance Chiminy |
| 32 | ELECTRIC KITCHEN CHIMNEY 900 mmSupplying wall-mounted electric kitchen chimney 900 mm wide conforming to IS 302-1 / IEC 60335-2-31; suction ≥ 1200 m³/h; filterless with thermal auto-clean or SS baffle filters; copper-wound thermally protected motor, ≥ 3 speeds + boost; noise ≤ 58 dB(A); touch / motion-sensor controls; 2 nos. LED lamps; SS / powder-coated body with toughened glass; warranty ≥ 2 years comprehensive and ≥ 5 years on motor.All complete as per specifications and directions of the Engineer-in-Charge. |
| 33 | EXHAUST DUCT 150 mm DIASupplying and fixing 150 mm dia aluminium / PVC exhaust duct with bends, clamps, wall cowl and back-draft flap.All complete as per specifications and directions of the Engineer-in-Charge. |
| 34 | INSTALLATION & COMMISSIONING OF CHIMNEYCore-cutting through wall for duct and making good, mounting of chimney, electrical connection from adjacent switch socket with 3-pin plug and earthing, testing and commissioning.All complete as per specifications and directions of the Engineer-in-Charge. |
| 35 | Part C Floor covering ( carpet) |
| 36 | CARPET – SUPERIOR GRADE (SUPPLY)Supplying broadloom tufted cut-pile carpet, 100% BCF nylon 6 / 6.6 solution-dyed, pile height 8–10 mm, pile weight ≥ 900 g/m², total weight ≥ 2000 g/m², gauge 1/10\\", stitch rate ≥ 9 per inch, primary PP woven + latex with secondary woven PP backing; colour fastness to light ≥ 5 (ISO 105-B02); static ≤ 2 kV (ISO 6356); flammability pass (ISO 6925).All complete as per specifications and directions of the Engineer-in-Charge. |
| 37 | CARPET – STANDARD GRADE (SUPPLY)Supplying broadloom tufted carpet, 100% BCF polypropylene, pile height 6–8 mm, total weight ≥ 1400 g/m², gauge 1/8\\", primary PP woven + latex with secondary backing; colour fastness to light ≥ 4 (ISO 105-B02); flammability pass (ISO 6925).All complete as per specifications and directions of the Engineer-in-Charge. |
| 38 | UNDERLAY 8 mm PU FOAM (FOR SUPERIOR CARPET)Supplying 8 mm PU-foam / felt underlay, density ≥ 80 kg/m³.All complete as per specifications and directions of the Engineer-in-Charge. |
| 39 | UNDERLAY 5 mm FELT (FOR STANDARD CARPET)Supplying 5 mm felt underlay.All complete as per specifications and directions of the Engineer-in-Charge. |
| 40 | GRIPPER STRIPS & EDGE / TRANSITION STRIPSSupplying and fixing timber / metal gripper strips at room perimeter and aluminium / brass edge and transition strips at door openings.All complete as per specifications and directions of the Engineer-in-Charge. |
| 41 | LAYING OF CARPETCleaning and levelling of sub-floor, laying underlay, power-stretching and fixing carpet on gripper strips, heat-bonded / taped seams, trimming and finishing. Measured per sq ft of finished floor area actually laid, no deduction for openings < 0.1 m².All complete as per specifications and directions of the Engineer-in-Charge. |
| 42 | Part D Horticulture and Landscaping |
| 43 | UPROOTING RANK VEGETATION & PREPARATION OF GROUND FOR NEW LAWNUprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.Quantity: new lawn area 1500 sqm.Ref: JKSOR-2022 Item No. 17.12 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 44 | SUPPLYING AND STACKING GOOD EARTHSupplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment). Earth to be fertile, friable, free from stones, kankar, roots and weeds.Quantity: 1500 sqm × 0.15 m thick layer over new lawn = 225 cum.Ref: JKSOR-2022 Item No. 17.2 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 45 | SUPPLYING AND STACKING WELL DECAYED COW DUNG MANURESupplying and stacking of well decayed cow dung manure at site including royalty (cow dung manure measured in stacks will be reduced by 8% for payment).Quantity: lawn 1500 sqm × 0.025 m = 37.5 cum + hedge beds & tree pits 7.77 cum.Ref: JKSOR-2022 Item No. 17.25 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 46 | MIXING EARTH AND MANUREMixing earth and sludge or manure in proportion specified or directed by officer in charge. Quantity: good earth + manure for lawn.Ref: JKSOR-2022 Item No. 17.9 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 47 | SPREADING GOOD EARTH / MANURESpreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately).Quantity: good earth + manure spread over lawn area.Ref: JKSOR-2022 Item No. 17.8 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 48 | FLOODING THE GROUND WITH WATERFlooding the ground with water including making kiaries and dismantling the same. Quantity: 1500 sqm.Ref: JKSOR-2022 Item No. 17.24 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 49 | FINE DRESSING OF THE GROUNDFine dressing of the ground to true levels and slopes before grassing. Quantity: 1500 sqm.Ref: JKSOR-2022 Item No. 17.7 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 50 | GRASSING WITH GRASS TURF (TURFING)Grassing with selection No. 1 grass with grass turf, including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing, including supplying of good earth if needed (the good earth shall be paid separately).Quantity: 1500 sqm new lawn with grass turf.Ref: JKSOR-2022 Item No. 17.10.4 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 51 | RENOVATING EXISTING LAWNSRenovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid separately).Quantity: existing lawn 300 sqm.Ref: JKSOR-2022 Item No. 17.11 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 52 | PREPARATION OF BEDS FOR HEDGING AND SHRUBBERYPreparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m and lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).Quantity: hedge / shrub beds 82 m long × 0.60 m wide × 0.90 m deep = 44.28 cum.Ref: JKSOR-2022 Item No. 17.13 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 53 | DIGGING HOLES 90 cm DIA × 90 cm DEEP FOR TREE PLANTATIONDigging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing including removal of rubbish & surplus earth, if any, with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid for separately). Holes 90 cm dia & 90 cm deep.Quantity: pits for ornamental / shade trees.Ref: JKSOR-2022 Item No. 17.14.2 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 54 | M.S. TREE GUARD 50 cm SQUARE, 1.40 m HIGHProviding and fixing M.S. tree guard 50 cm square in plan, height 1.40 m above ground level and 0.50 m below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x5 mm, 1.9 m long, one at each corner and 8 nos. flat iron of size 25x5 mm, 1.4 m long, welded to 4 nos. 25x6 mm M.S. flats placed horizontally around the vertical members of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm welded near the middle height and lettered as directed. Fixed to the ground by embedding the four corner legs, including refilling the earth, compaction etc., painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respects.Quantity: one per tree pit.Ref: JKSOR-2022 Item No. 17.27 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 55 | BRICK EDGING TO LAWNS AND BEDSEdging with bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m, with common burnt clay (non-modular) bricks of class designation 7.5.Quantity: edging along lawn, beds and pathways.Ref: JKSOR-2022 Item No. 17.19.1 – rate inclusive of GST & contractor's profit/overheads as per SOR. |
| 56 | CIRCULAR CEMENT CONCRETE FLOWER POTS 35 cmProviding circular cement concrete pots of specified size, cast with cement concrete of nominal mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 6 mm nominal size) reinforced with 7 nos. (3 horizontal and 4 vertical 'U' shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows and height. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm, wall thickness 25.4 mm.Quantity: flower pots for verandah and entrance.Ref: JKSOR-2022 Item No. 17.29.1 – rate inclusive of GST & contractor's profit/overheads as per SOR. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender