Tender For Construction Of Cement Concrete Road, Reinforced Cement Concrete Drain And Providing And Fixing Interlocking Tiles (Including Construction Of Drain) In Village- Makshudpur, Yea Wc-06
Tender Value
79.20 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
1.58 Lakhs
Bank guarantee accepted
Document Fee
1975
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gautam buddha nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Cement Concrete Road, Reinforced Cement Concrete Drain And Providing And Fixing Interlocking Tiles (Including Construction Of Drain) In Village- Makshudpur, Yea Wc-06
BOQ
| Sl. No. | Item Description |
| 1 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) |
| 2 | Providing and laving 80 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68) |
| 3 | Providing and laying design mix cement concrete of M-30 grade in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required laying at site, spreading and compacting mechanically by using needle and surfave vibrator, levelling to required slope/camber finishing with required texture, including steel form work with study M.S. channel section, curing, making provision for contraction/expansion, construction & longitudinal joints (10mm wide x 50 mm deep by groove cutting machine providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/tie bars to be paid separately). Note- Cement content considered in M-30 is @ 340 kg/cum Excess/less cement Used as per design mix is payable/ recoverable sepearately Cement concrete prepared with batch mixing machine |
| 4 | Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work |
| 5 | M-150 brick work in 1:4 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4 |
| 6 | 12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand) |
| 7 | Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a |
| 8 | Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils |
| 9 | Reinforcement for RCC work including straghtening cutting bending placing in position and binding all complete up to plinth |
| 10 | Dry Brick on Edge flooring in required pattern wirh bricks of class designation 150 on bed of earth including filling compressed woth M-150 Brick |
| 11 | Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters |
| 12 | Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work |
| 13 | Providing & Laying in position machine batched and machine mixed design mix M-25 gradement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site od laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per I:S 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge (Note:- Cement content considered in this item is @ 330 kg/cum, Excess/less cement used as oer design mix is payable/recoverable seperately). All works upto plinth DAR-18/5.33.1 |
| 14 | Reinforcement for RCC work including straghtening cutting bending placing in position and binding all complete up to plinth |
| 15 | centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete |
| 16 | centering & shuterring including strutting propping etc & removal of form for: Wall (any thickness) including attached pilasters, Butteresses, plinth and string couses etc |
| 17 | centering & shuterring including strutting propping etc & removal of form for: Slabs |
| 18 | centering & shuterring including strutting propping etc & removal of form for: dges of slabs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender