Tender For Dr. B.R. Ambedkar Statue Development Work In Village Mallav, Gram Panchayat Ailo.
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
5 days left
EMD
8500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bahraich → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dr. B.R. Ambedkar Statue Development Work In Village Mallav, Gram Panchayat Ailo.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 5 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, ouvers, steps, stair cases, etc., including hoisting and etting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) upto 25%)). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Mild steel and Medium Tensile steel bars. |
| 7 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer, Using M.S. angels 40x40x6 mm for diagonal braces. |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | 12mm thick plaster in cement & fine sand of 1.25 fineness modulous mortar in 1:4 Including supply of all materail labour T&P required for proper completion of the work. |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 13 | Other Hidden Work |
| 14 | Wall Painting & Lekhan Work |
| 15 | Supply Of Iron Bench. |
| 16 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 17 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 |
| 18 | Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 |
| 19 | Providing and laying in position in C.C specified grade excluding the cost of centering, shuttering ,finishing and reinforcement (1:5:10) with cement, Fine sand and 40mm gauge B/ballast i/c all complete. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 21 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 24 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 25 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 27 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 28 | 12mm thick Plaster In 1:4 Cement & Fine Sand Mortar. |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 30 | FINISHING WITH DELUXE MULTI SURFACE PAINT SYSTEM FOR ENTERIOR AND EXTERIOR USING PRIMER. |
| 31 | Supply And Fixing Of Mesh Jali For Platform Etc All Complete. |
| 32 | Supply And Fixing Of Angle Cutting, Hosting Fixing & Appling Etc All Complete. |
| 33 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 34 | Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 |
| 35 | Providing and laying in position in C.C specified grade excluding the cost of centering, shuttering ,finishing and reinforcement (1:5:10) with cement, Fine sand and 40mm gauge B/ballast i/c all complete. |
| 36 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 37 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer in-charge. |
| 38 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). |
| 39 | Supply And Fixing of Granite Stone Sign Board & Photograph Etc All Complete. |
| 40 | Supply, 05 years warrenty with comperhensive Maintenance of complete Solar street lighting (W-LED Based) with Li-Fe-PO4 Battery at identified sites of Distict for site , as per technical specification ,(LED -12 Watt, Solar Module -75 Wp at 17 V Battery -12.8, 30 AH) MNRE APPROVED |
| 41 | Installation, Commissioning and Testing Charge |
| 42 | Transportation of Hand Pumps material and T&P etc to the site of work including loading unloading and proper stacking at site also including retum cartage of unused material equippage and T&P etc to the department store. |
| 43 | Supply of the following materials required for construction of bore holes installation of india mark II hand pump drain etc complete excluding cartage of material to be suppling by the department a India mark II H P set 110mm dia PVC pipe (6kg/cm2) 63mm dia PVC redded stramer ) 32mm dia GL (medium) pipe bieaching power PVC reducer 110x63mm. |
| 44 | Construction of 150mm dia bore hole with M.S. casing pipe by the casing method in the ordinary soil including rection of bering & p hiring charge of boring T&P and extra stion of MS casing pipe after lowering PVC assemby and it also includes dismentaling of boring T&P etc complete. 0.30m BGL 30-35m BGL. |
| 45 | Lowering of PVC pipe of 110/63 mm dia 63mm stainer and standrap in 150mm bore hole including component etc complete 0-30m BGL 30-35m BGL. |
| 46 | a Installation of India mark II hand pump over the bore hole as per instruction of the engineer or his authorised agent Excluding supply of components including jointing of 32mm GL medium pipe and lowering GL medium pipe and connecting rod and cylinder saaemdly complete. |
| 47 | Development of bore mannual labour till the discharging is free from sand particle. |
| 48 | Disinfection of hand pump using powder clorine compound including throughcleaning of all exterior parts of the hand pumps coming in contact with water excluding supply of bleaching power complete. |
| 49 | Construction of circular C.C. (1:2:4) 1.85 dia plateform for handpump as per type design and drawing including supply of all materials labour, T&P complete required for proper completion of work. |
| 50 | Construction of C.C. (1:2:4) drain as per type design and drawing from plateform upto existing naturals drains including supply of all material labour and T&P complete required for proper completion of work. |
| 51 | Embossing the detail hand pump installation as per deptt. Circular over the head of hand pump assembly complete. |
| 52 | Water testing |
| 53 | Site Clearance Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender