Tender For Under District Barabanki, Repair Work Of 2 New Teaching Rooms And 4 New Teaching Rooms In Shri Parsvnath Digambar Jain Inter College, Tikaitnagar, Barabanki, Lot No 2
Tender Value
31.71 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
7 days left
EMD
63420
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Under District Barabanki, Repair Work Of 2 New Teaching Rooms And 4 New Teaching Rooms In Shri Parsvnath Digambar Jain Inter College, Tikaitnagar, Barabanki, Lot No 2
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation by mechanical means (Hydraulic Excavatory)/manual means in foundation trenches or drain (Not exceeding 1.5m in width or 10 sqm on plan). I/c dressing of sides and ramming of bottoms, for all lift, i/c getting out the excavated soil and disposal of surpluse excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement: 4 coarse (Zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 |
| 3 | Brick work with common bruint clay F.P.S. (Non Modular) Brick of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 Cement ; 6 coarse sand) DAR NO. 6.1.2) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 5.2.2 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6 |
| 6 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete Name of Work:- PROPOSED ESTIMATE FOR CONSTRUCTION OF B.R.C. BUILDING AT BARABANKI ABSTRACT OF COST (Based on CPWD D.S.R.-2023 & Market Rates) (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Partll 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer'sstandard dilution) DSR 2.35.3.1 |
| 7 | Brick work with common bruint clay F.P.S. (Non Modular) Brick of class designation 7.5 in supper structure above plinth up to floor v level in all shapes and sizes cement mortar 1:6 (1 Cement ; 6 coarse sand) DAR NO. 6.4.2 |
| 8 | Providing and laying in position specified grade of reainforced cement concrete excluding the cost of centering and shuttering and finishing rainforment in 1:2:4 (1 cement:2 coarse Sand Zone-III) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from naturela sources in Plinth Beam. DSR 5.1.3 |
| 9 | Centering and shuttering i/c strutting, propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and centilevers.. DSR No. 5.9.5 |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DAR 5.3 |
| 11 | Centering and shuttering i/c strutting, propping etc and removal of form for Slab.. DSR No. 5.9.3 |
| 12 | Providing and fixing factory made uPVC door frames made of uPVC extruded sections having an overall dimension as below (tolerance (+/-)1mm, with wall thickness 2.0mm (+/-)0.2mm, corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hings side vertical of the frames reinforced by galvanized M.S. Tube of size 19×19 mm and 1 mm ((+/-) 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers' specification and direction of Engineer-in-charge.Extruded Section Profile size 48×40 mm DSR 9.117.1 |
| 13 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. DSR 9.118.2 |
| 14 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710 DSR 9.126.1 |
| 15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding DSR 9.48.1 |
| 16 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes. DSR 10.30.1 |
| 17 | Steel reinforcement for RCC work i/c straightening, cutting, bending, placing in postion and binding all complete upto plinth level and above plinth levet Thermo-Mechanically treated bars of grade Fe-5000D or more. DSR No. 5.22.6 |
| 18 | 12 mm thick Cement plaster in 1:3 cement coarse sand finished with a floating coat of neat cement. DSR 13.9.1 |
| 19 | 12mm thick cement plaster Mixe 1:6 cement fine sand mix mortar in plinth ( inner side) DSR 13.1.2 |
| 20 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR 11.3.1 |
| 21 | Excavating, supplying, stacking and filling of local earth (i/c royalty) by mechanical transport upto a lead of 5km also i/c remming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinths, sides of foundation etc. complete for all lift. DAR No. 2.25(a) |
| 22 | Providing & applying white cement based putty of aveage thickness 1mm of approved brand and manufacturer ove the plastered wall surface to prepare the surface even and smooth complete SI No DSR 13.80 |
| 23 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. DSR 13.48A.1 |
| 24 | Distempering with 1st quality acrylic distemper (Ready Mixed) VOC content less tha 50 gm/ltr. Of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (Two or more coats) over and including water thinnable priming coat with cemnt primer having VOC content less than 500 gram/Ltr. DSR 13.41.1 |
| 25 | Painting with synthetic Enamel paint of approved brand and manufacture of required colour to give and even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 26 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 1.3.3 |
| 27 | Power plug wiring in PVC conduit (2 x 4 Sq.Mm.):Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 1.12 |
| 28 | Power plug wiring in PVC conduit (4 x 4 Sq.Mm.):-Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 1.13 |
| 29 | Circuit/ Sub main wiring in PVC conduit:-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. |
| 30 | 2 X 1.5 sq. mm+ 1 X 1.5 sq. mm earth wire. DSR 1.14.1 |
| 31 | 2 X 2.5 sq. mm+ 1 X 2.5 sq. mm earth wire. DSR 1.14.2 |
| 32 | S/F power plug point piano type accessories:-Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. DSR 1.30 |
| 33 | Applying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth metal enclosed plug top along with 20 amps. \\"C\\" curve, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. DSR 2.18 |
| 34 | S/F modular type electronic fan regulator:-Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. As required. DSR 1.25 |
| 35 | S/F modular type blanking plate :-Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR 1.26 |
| 36 | Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required: DSR 1.21 |
| 37 | 20 mm DSR 1.21.1 |
| 38 | 25 mm DSR 1.21.2 |
| 39 | Supplying and fixing 5 amps. to 32 amps. rating, 240 volts 'C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole DSR 2.10.1 |
| 40 | Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required. DSR 2.11 |
| 41 | S/F DP MCB IsolatorSupplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. DSR 2.12 |
| 42 | 40 Amp DSR 2.12.1 |
| 43 | 63 Amp DSR 2.12.2 |
| 44 | Supplying and fixing following way, SP&N, sheet steel, MCB distribution board, 240 Von surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 6 way, Double door DSR 2.3.1 |
| 45 | Supplying and fixing following way, horizontal type TP&N, sheet steel MCB distribution board, 415 Von surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 4 way (4 + 12), Double door DSR 2.4.1 |
| 46 | Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR 1.45 |
| 47 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (prefreably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) DSR 9.1.3 |
| 48 | Supply of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. UPSOR Ch.14, 1413, CAT-AAA |
| 49 | S/F Inaugration black granite (Polished) 20mm thick stone size 0.90x0.75m. including lettering, printing, border etc. will be painted of superior quality is required shade and colour including fixing excavation of foundation (1.40x0.50x0.40 m), P.C.C. 1:6:12 (1.40x0.50x0.10m), brick work 1:4 cement coarse sand foundation (1.40x0.345x 0.30m) ,upto (1.40x0.23x1.35 m),12mm thick plaster 1:4 cement coarse sand and finishing walls with water proffing white cement paint of approved make and quality such as super snowcem paint etc. all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender