Tender For Special Civil Maintenance And Repairs To The 45-Meter Height Lh, Tower, 60-Meter Height Vts Tower, Technical Building, Power House, Inspection Quarter, Staff Quarter At Jakhau Lh/Vts Station
Tender Value
98.78 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
1.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Civil Maintenance And Repairs To The 45-Meter Height Lh, Tower, 60-Meter Height Vts Tower, Technical Building, Power House, Inspection Quarter, Staff Quarter At Jakhau Lh/Vts Station
BOQ
| Sl. No. | Item Description |
| 1 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of LH Tower all other charges etc.complete on outer surface of 45m height LH Tower. |
| 2 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of LH Tower all other charges etc.complete on Inner surface of 45m height LH Tower. |
| 3 | Painting with acid proof paint One or more coats on old work for floor of approved brand and manufacture (Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, ropes, Tools, Plants and Providing & Fixing net for safety around area of LH Tower all other charges etc.complete on Inner surface of 45m height LH Tower floor of staircase & Landing. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats paint over wooden surface including the cost of all materials,labours, tools& plants, and all other charges etc., complete.on work of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 5 | Applying priming coats With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 6 | LH Tower Hand Railling Top outer side |
| 7 | LH Tower Dome |
| 8 | MS Ladder of LH Tower |
| 9 | Trap door |
| 10 | Lift cell Grill |
| 11 | LH Tower Inside Stair Case Hand Railing |
| 12 | Painting two coats with synthetic enamel paint on existing work on existing surface including the cost of all materials, labours, tools, scaffolding & plants and all other charges etc., complete. |
| 13 | LH Tower Hand Railling Top outer side |
| 14 | LH Tower Dome |
| 15 | MS Ladder of LH Tower |
| 16 | Trap door |
| 17 | Lift cell Grill |
| 18 | LH Tower Inside Stair Case Hand Railing |
| 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 20 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar 1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline [email protected]/running metre per coat including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 21 | Replacement of damaged/broken from glazed window shuttter with 4mm thick glass panes of approved 1st quality wood beading disposal of the debris, stacking of the old removed materials away from the site and as described as per condition of site including the all materials, labours, tools & plants and all other charges etc.complete. |
| 22 | Repairing and replacement existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including the supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 23 | Doors |
| 24 | Window shutters with Frame |
| 25 | Providing and fixing glazed shutters for windows and clerestory windows using 4 mm thick float glass panes including ISI marked Brass pressed butt hinges bright finished of required size with necessary screws.25mm thick Shutters |
| 26 | Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.as directed including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 27 | Replacement of 100x85x5.5 mm (heavy type) hinges for Doors & Windows |
| 28 | 50x40x2.5mm butt hinges for Door Cleat |
| 29 | Replacement of 250x10mm Brass tower bolt |
| 30 | Replacement of 200x10mm Brass tower bolt |
| 31 | Replacement of 150mm Brass tower bolts |
| 32 | 125mm Brass handle for Doors & windows |
| 33 | 100mm Brass handle for Window Shutter |
| 34 | Brass door latch /Aldrop 300x16x5mm (Outer) |
| 35 | Brass door latch /Aldrop 250x16x5mm (Inner) |
| 36 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.), Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/ RCC work. including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 37 | Providing and grouting of RCC top slab of structures with M-60 grade cementitious grout/PMM micro-concreting (non-shrink) of approved make, by suitable means (free-flowing/pump), including curing, complete as per the directions of the Engineer-in-Charge. (Payment shall be made on the basis of the actual weight of approved grout injected into) RCC slabs, sunshades, beams, and other RCC structures with mixed waterproofing (Fosroc/Dr. Fixit/Sika). The work includes the cost of supply of all materials, labour, tools, plants, and all other charges, complete. |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. Including supply of all materials, labours, tools & plants and all other charges etc. complete, Shuttering-Work |
| 39 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 60metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works |
| 40 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete on outer surface of 60m height VTS Tower. |
| 41 | Labour charges only for removing worm out paint by using scrapper & sand paperand wherever necessary & as directed at site with cleaning and preparing the surface good for painting and as directed, including the cost of all materials, labours, tools & plants, necessary safty belt etc complete. 60mt to 75mt height on steel tower surface |
| 42 | Applying priming coats With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel tower above the VTS rader tower of 60mt to 75mt height on steel tower surface at all height of previously painted surface after removing old and wornt out paint by scrapping, cleaning and preparing the surface good steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 43 | Synthetic Enamal painting two coats to steel tower above the VTS rader tower of 60 mt to 75mt height on surface at all height of previously painted surface with (Higlos luxol Berger brand/Asian )of approved 1st quality and colour of synthetic enamel paint an even shade after removing old and wornt out paint by scrapping, cleaning and preparing the surface good including the cost of all materials, labours, tools & plants and all other charges etc. complete. |
| 44 | Painting two coats with premium acrylic emulsion paint Inside VTS tower surface (BergerAsian/brand) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete on Inner surface of 60m height VTS Tower |
| 45 | Finishing with Epoxy paint (two or more coats) in VTS Tower basement prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete.On concrete work |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats paint over wooden surface including the cost of all materials,labours, tools& plants, and all other charges etc., complete.on work of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 47 | Applying priming coats With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 48 | VTS Tower Inside Stair Case Hand Railing |
| 49 | Square Hollow Section + 44.9 & 57.0mtr LVL |
| 50 | VTS Tower Hand Railling Outer side |
| 51 | MS Ladder of VTS Tower |
| 52 | Trap door |
| 53 | Painting two coats with synthetic enamel paint on existing work on existing surface including the cost of all materials, labours, tools, scaffolding & plants and all other charges etc., complete. |
| 54 | VTS Tower Inside Stair Case Hand Railing |
| 55 | Square Hollow Section + 44.9 & 57.0mtr LVL |
| 56 | VTS Tower Hand Railling Outer side |
| 57 | MS Ladder of VTS Tower |
| 58 | Trap door |
| 59 | Providing and fixing 8mm thick Glass panes in circular glazing of VTS tower at 45.00mtr/57.00mtr level balcony, including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete. |
| 60 | Applying and fixing Silicon-putty of glass panes glazing of VTS tower at 45.00mtr/57.00mtr level balcony and Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width, including the cost of removing of old dismage putty carefully, fixing, filling joints with silicon and all materials,labours, tools& plants, scaffolding lifting &shifting of hiegh rise tower, all other charges etc., complete. |
| 61 | Replacement of damaged/broken from glazed window shuttter with 4mm thick glass panes of approved 1st quality wood beading disposal of the debris, stacking of the old removed materials away from the site and as described as per condition of site including the all materials, labours, tools & plants and all other charges etc.complete. |
| 62 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar 1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline [email protected]/running metre per coat including cost of supply of all materials, labours, tools & plants and all other charges etc. complete.(Providing and fixing double scaffolding system (cup lock type) on the exterior side of structure, upto 60metre height Item no.45) |
| 63 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) (Providing and fixing double scaffolding system (cup lock type) on the exterior side of structure, upto 60metre height Item no.45) |
| 64 | Providing and fixing of wood work with approved Second class teak wood, free from knots, in position in frames for doors, cupboard etc. as directed including fixing m.s holdfast grouted in cement concrete 1:2:4(1 cement: 2 COARSE SAND: 4 graded stone aggregate 12.5mm nominal size ) in the walls as directed including cost of supply of all materials, labours, tools& plants and all other charges etc. complete. |
| 65 | Providing and fixing ISI-marked teak wood panelled door shutters conforming to ISI Marked decorative type, core of wood panelled construction with frame of 1st class hard woodand well matched teak with vertical grains or cross bands and faceveneers on both faces of shutters.35mm thick shutters including ISI marked Brass butt hinges bright finished of required size with necessary screws, Including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 66 | Providing and fixing glazed shutters for windows and clerestory windows using 4mm thick float glass panes including ISI marked Brass pressed butt hinges bright finished of required size with necessary screws.30mm thick Shutters, including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 67 | Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.as directed including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 68 | Replacement of 100x85x5.5 mm (heavy type) hinges for Doors & Windows |
| 69 | 50x40x2.5mm butt hinges for Door Cleat |
| 70 | Replacement of 250x10mm Brass tower bolt |
| 71 | Replacement of 150mm Brass tower bolts |
| 72 | 125mm Brass handle for Doors & windows |
| 73 | Brass door latch /Aldrop 300x16x5mm (Outer) |
| 74 | Brass Eye Hook 200x6mm (heavy duty) |
| 75 | Floor Twin Door stopper |
| 76 | Aluminium die cast body tubular type universal hydraulic door closer |
| 77 | Dismantling old plaster or skirting raking out joints and cleaning the surface for tiles including disposal of rubbish to the dumping ground within 50 metres lead, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 78 | Providing and laying Vitrified tiles in floor of size 600mmx600mmx10mm thick, with water absorption less than 0.08% and conforming to IS of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 79 | Providing and fixing G.I. Hand rail of approved size (40mmdia) by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer, as per direction of Engineer-in-charge existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and all other charges etc.complete on outer surface of 60m height VTS Tower. |
| 80 | Providing & Fixing Structural steel welded in built up section/framed work ( Round, Squre, Rectangular, Channel, ISMB section) truses etc, including cutting, hoisting,fixing in position and applying a priming coat, as directed & as described as per condition at site including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants lifting &shifting of hiegh rise tower all other charges etc.complete. on outer surface of 60m height VTS Tower. |
| 81 | Base Plate (125x125x6mm) |
| 82 | 10mm Dia Anchor fastner for Base Plate |
| 83 | Clamps10 x 6mm thick for Double Pipe Clamp of G.I. Pipe Hand Railing Joints |
| 84 | 10mm Dia Bolts for Hand Railing Joint Clamp |
| 85 | Painting two or more coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade with applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of G.I.Hand Railing and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower hand Railing all other charges etc.complete on outer side of 60m height VTS Tower. |
| 86 | Providing and laying cement concrete (CC) boxes of size 150x150x150 mm for the hand railing base using cement concrete mix 1:2:4 (1 part cement : 2 parts river sand : 4 parts 20 mm nominal size stone aggregate), after dismantling and removing the damaged portion, cleaning, and watering. The work includes the cost of all labour, materials, tools,plants, and other and other charges etc. complete. |
| 87 | 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) for Celling plaster, Including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge. |
| 88 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxol Berger brand/Asian ) to give an even shade cleaning & preparing the surface good for painting, cleaning the painting spots after painting, removal and placing of all the items in existing position and as directed & as described as per condition at site including the cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete on outer surface of 60m height VTS Tower. |
| 89 | Providing and grouting of RCC top slab of structures with M-60 grade cementitious grout/PMM micro-concreting (non-shrink) of approved make, by suitable means (free-flowing/pump), including curing, complete as per the directions of the Engineer-in-Charge. (Payment shall be made on the basis of the actual weight of approved grout injected into) RCC slabs, sunshades, beams, and other RCC structures with mixed waterproofing (Fosroc/Dr. Fixit/Sika). The work includes the cost of supply of all materials, labour, tools, plants, and all other charges, complete. |
| 90 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. Including supply of all materials, labours, tools & plants and all other charges etc. complete, Shuttering-Work |
| 91 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 60metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works |
| 92 | Removing dry or oil bound Plastic/Distemper emulsion paint from wall surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches as directed including cost of supply of all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 93 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as directed & as described as per condition at site including the cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 94 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre,as directed & as described as per condition at site including the cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 95 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 96 | Wall painting with premium acrylic/plastic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, Including the cost of all materials, labours, tools & plants, scaffolding etc., complete. Two Coats |
| 97 | Finishing walls with two or more coats of premium Acrylic, smooth exterior paint with silicon additive of 'Apex Ultima' of make Asian paint, ISI or equivalent required :Old work (Two or more coat applied @ 1.43 ltr/10 sqm over) as per direction up to floor three levels approved quality and colour to give on even shade after scrapping, wire properly & then cleaning the cement painting spots on the floors, furnitures, doors & windows etc of the building after painting , removal and placing of all the items in existing position as directed including cost of supply of all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 98 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on Wooden Surface, including the cost of all materials,labours, tools& plants, and all other charges etc., complete.on work of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffolding etc., complete. |
| 99 | Applying priming coats With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 100 | C I Cover |
| 101 | Paint to MS Main gate |
| 102 | Street Light |
| 103 | HSD Tank G I barbed wire fencing |
| 104 | MS ladder & Hand railing of O H tank |
| 105 | Electric Pole |
| 106 | Window Grill of Security Cabin |
| 107 | Painting two coats with synthetic enamel paint on existing work on existing surface including the cost of all materials, labours, tools, scaffolding& plants and all other charges etc., complete. |
| 108 | C I Cover |
| 109 | Paint to MS Main gate |
| 110 | Street Light |
| 111 | HSD Tank G I barbed wire fencing |
| 112 | MS ladder & Hand railing of O H tank |
| 113 | Electric Pole |
| 114 | Window Grill of Security Cabin |
| 115 | Repairs to existing C.C pathways with cement concrete 1:2:4 ( 1 cement : 2 river sand : 4 stone aggregate of 20 mm nominal size) after dismentaling & removing damaged portion , cleaning watering including the cost of all labours, materials, tools & plants and other charges etc. complete |
| 116 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 117 | Street Light foundation surface |
| 118 | Kerb Stone Surface |
| 119 | Painting road surface marking with (125mm) adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on CC Road surface in white shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complet (Two or more coats) |
| 120 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar 1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline [email protected]/running metre per coat including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 121 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. Including supply of all materials, labours, tools & plants and all other charges etc. complete, Shuttering-Work |
| 122 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 123 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50metres lead. For thickness of tiles 25mm to 40mm, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 124 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 125 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 126 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 127 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge |
| 128 | Dismantling G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 129 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal/village dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved all other charges etc. complete As against item no.61, 62 & 63 |
| 130 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 131 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Rey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4(1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 132 | Providing and fixing Ist quality ceramic glazed (300mmx450mm)wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 133 | Providing and fixing 10mm thick of full body vetrified tiles in various finish of 600mmx600mm size ( Swastika/Marbito or their equivalent) as per details ,in floor of approved make and of approved colour of first quality, even shade, set in cement slurry over minimum 50mm thick cement morter 1:3 laid to proper slope,line and level, as specified including using white cement with or without colour mixing as per shade of approved quality in pointing of joints also joint fill with acrylic grout filler and applying neat cement paste about 3kg per sqm, curing and cleaning complete as directed by engineer-in-charge. |
| 134 | Dismantling of old wooden windows shutters including chokhats, hold fasts and other attachments etc. upto floor 2 level complete and stacking them within 1 km lead as directed at site including the cost of all labours, tools & plants etc. complete. Window Shutter |
| 135 | Buy back of Dismantaled - Window Shutter (Qty. Same as above item 72) |
| 136 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of slab over 0.50 sqm |
| 137 | Kota stone slabs 20 mm thick in kitchen bottom , risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing, Including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge.complete. |
| 138 | Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. kota work |
| 139 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 140 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 141 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 178 mm. |
| 142 | Replacement of unserviceable/damaged low level cistern 10litre capacity with white Coloured of approved quality and making connections of inlet, outlet with EWC/IWC including disposing the unserviceable materials from the site. Supply of all materials, labour,tools, etc. complete. |
| 143 | Providing and fixing 100 mm sand cast Iron grating for gully trap including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. |
| 144 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 145 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 146 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms, As directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 147 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms, As directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 148 | S/F Water supply & Sanitary Fixtures fiitting directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 149 | Providing and fixing 15mm thick C.P. brass bib cock of approved quality |
| 150 | 15mm thick Swan neck CP brass mixter Bib cock in kitchen sink |
| 151 | 15mm thick CP brass Bib cock for Washbasin |
| 152 | 15mm CP Brass Single lever telephonic wall mixer for IQ |
| 153 | 15mm Shower arm with nose 150mm diameter |
| 154 | 15mm Angle valve (Basin inlet connection- Concealed with wall flange) |
| 155 | Angular stop cock with wall flange & Jet Spray with 1meter pvc tube SS |
| 156 | 15mm Concealed Stop Cock for water heater |
| 157 | 32mm Brass wheel valve |
| 158 | 40mm Brass wheel valve (Jaquar-ESS) |
| 159 | SS316 Toilet paper holder |
| 160 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 161 | Providing and fixing PTMT Soap Dish Holder |
| 162 | Providing and fixing 25mm ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 163 | 15mm dia flexible connection for wash basin and Urinal for water supply. |
| 164 | 15mm (Angular stop cock with wall flange & Hands Spray with 1meter pvc tube SS) |
| 165 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 166 | Providing and fixing Flexible Waste pipe for wash basin and sink, of approved quality and colour and as per the direction of Engineer-in-charge. |
| 167 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 168 | Providing and Fixing 20 mm nominal dia Pipes |
| 169 | Providing & laying 25 mm nominal dia Pipes |
| 170 | Providing & Laying 32 mm nominal dia Pipes |
| 171 | Providing & Laying 40 mm nominal dia Pipes |
| 172 | Supplying & placing pvc water tank of approved make Syntex or equivalent 500 Ltr capacity at the roof of the building & making its connection with pipe line as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete as per IS : 12701 marked |
| 173 | Supplying & laying 75/100/150 mm dia PVC. Sewer/rain water pipe on wall face unplasticised Rigid UPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. with all nessassary fittings as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 174 | 75mm Dia PVC Pipe for Drainage line |
| 175 | 110mm Dia PVC pipe for Sewer line |
| 176 | 110mm Dia PVC pipe for Rainwater Harvesting |
| 177 | Supplying & fixing CI Manhole cover of approved size & make with all nessassary fittings of approved quality fixed as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 178 | 300mmx300mm cover with frame |
| 179 | 600mmx455mm cover with frame |
| 180 | Providing and fixing aluminium work for windows and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 181 | For Frame Work / fixed portion (Jindal Section 4605, 4604 & 4407) |
| 182 | Providing and fixing aluminium work (Jindal Section 4524) for shutters of windows, including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required, cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 183 | Providing & Fixing of Aluminium grill of Size 75mmx75mm to the window frame as directed including cutting the bars to suitable length, straighting, drilling holes in the alluminium frame and fixing the mesh in line and level(75x75mmC/C) etc complete including cost of all matierials, labour, tools and plants etc complete as directed. |
| 184 | Providing and fiximg of Fly proof stainless steel grade 304 wire gauge with 0.5mm dia. wire and 1.4mm wide aperture with matching wood/teak beading of approved 1st quality,brand and necessary brass screws, nails etc. as directed at site, including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete |
| 185 | Providing & Fixing of Alluminium channel for fixing of grill to the window frame as directed including cutting the bars to suitable length, straighting, drilling holes in the alluminium frame and fixing the mesh in line and level etc complete including cost of all matierials, labour, tools and plants etc complete as directed. |
| 186 | Providing and fixing float glass panes of 5mm thickness aluminium window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 187 | Replacement of damaged/broken from glazed window shuttter with 4mm thick glass panes of approved 1st quality wood beading disposal of the debris, stacking of the old removed materials away from the site and as described as per condition of site including the all materials, labours, tools & plants and all other charges etc.complete. |
| 188 | Repairing and replacement existing wooden Door/Window shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including the supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 189 | Doors |
| 190 | Window shutters with Frame |
| 191 | Providing and fixing of wood work with approved Second class teak wood, free from knots, in position in frames for doors, cupboard etc. as directed including fixing m.s holdfast grouted in cement concrete 1:2:4(1 cement: 2 COARSE SAND: 4 graded stone aggregate 12.5mm nominal size ) in the walls as directed including cost of supply of all materials, labours, tools& plants and all other charges etc. complete. |
| 192 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer- in-charge. |
| 193 | Providing and fixing ISI marked door shutters conforming to IS decorative type, core of block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters.35mm thick shutters including ISI marked Brass butt hinges bright finished of required size with necessary screws |
| 194 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge |
| 195 | Providing and fixing glazed shutters for windows and clerestory windows using 4mm thick float glass panes including ISI marked Brass pressed butt hinges bright finished of required size with necessary screws.30mm thick Shutters, including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 196 | 25mm thick (for cupbord shutter) including ISI Marked brass hinges necessary brass screws, nails etc. as directed at site including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete. |
| 197 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood including ISI marked Brass butt hinges bright finished of required size with necessary screws etc.Complete. 25mm thick Fly proof shutters |
| 198 | Providing and fiximg of Fly proof stainless steel grade 304 wire gauge with 0.5mm dia. wire and 1.4mm wide aperture with matching wood/teak beading of approved 1st quality,brand and necessary brass screws, nails etc. as directed at site, including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete |
| 199 | Providing and fixing factory made solid Foam uPVC/Wooden/Plywood profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-in charge |
| 200 | Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.as directed including cost of supply of all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 201 | Replacement of 100x85x5.5mm (heavy type) hinges for Doors & Windows |
| 202 | 75x65x4mm (heavy type) butt hinges for Fly proof shutter |
| 203 | 50x40x2.5mm butt hinges for Door Cleat |
| 204 | Replacement of 250x10mm Brass tower bolt |
| 205 | Replacement of 200x10mm Brass tower bolt |
| 206 | Replacement of 150mm Brass tower bolts |
| 207 | Replacement of 100 mm Brass tower bolts |
| 208 | 125mm Brass handle for Doors & windows |
| 209 | 100mm Brass handle for Fly proof Shutter |
| 210 | Brass door latch /Aldrop 300x16x5mm (Outer) |
| 211 | Brass door latch /Aldrop 250x16x5mm (Inner) |
| 212 | Brass Eye Hook 200x6mm (heavy duty) |
| 213 | Cup baord or ward robe locks |
| 214 | Floor Door stopper |
| 215 | Door magnetic catcher |
| 216 | Aluminium die cast body tubular type universal hydraulic door closer |
| 217 | Providing and fixing S.S. Curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary required accessories complete. 25 mm diameter |
| 218 | Providing & fixing curtain in Inspection Quarter New /Old All Windows & Doos & Tr.building Office New/Old with All Windows including all fitting, material, tools, plant and labour etc. completed as directed as Engineer-In-Charge. Quotation Atteched |
| 219 | For Door |
| 220 | For Window |
| 221 | Cleaning of under ground sump/septic tank, with complete removal of scum and sludge from tank , throwing away the same as directed including removal and re-fixing of septic tank cover properly , flushing the soil pipe line as directed with water The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water, including supply of all materials , labour , tools and plants etc. complete, all as per direction of Engineer-in-Charge. |
| 222 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-incharge. |
| 223 | French spirit polishing One or more coats on old work of old office/IQand Staff qtrs furniture with ready mixed polish of approved brand and manufacture of approved quality as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 224 | Dismantling steel work in built up sections in angles, tees, flats and channels with all gusset plates, bolts, nuts, cutting rivets, welding, dismantling and stacking within 50 metres, as directed & as described as per condition at site including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of Over head water tank, lifting & shifting of hiegh rise Over head water tankr all other charges etc.complete |
| 225 | Buy back of Dismantling of steel work (Qty Same as item 104) |
| 226 | Providing & Fixing Structural steel (Angle size75mmx75mmx6mm) welded in built up section/framed work ( round, Squre, Rectangular, Channel, ISMB section) truses etc, including cutting, hoisting,fixing in position and applying a priming coat, as directed & as described as per condition at site including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of 12Mtr height of OH Tank, lifting &shifting of high rise tank all other charges etc.complete. (GI Flate,GI Steps & GI Steel Ladder Strip) |
| 227 | Repairing old furniture staff Qtr, IQ & office all nessassary fittings like brackets,12mm ply wood sheet etc of approved quality as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete. as per the direction of Engineer-incharge. |
| 228 | Wooden Cot -With all nessassary fittings like brackets 12mml plywood sheet |
| 229 | Meat Safe - With all nessassary fittings like brackets& SS Jali |
| 230 | Office table-With all nessassary fittings like brackets & locks |
| 231 | Dining table -With all nessassary fittings like brackets & Replement of top |
| 232 | Dining chair-With all nessassary fittings like brackets & Replement of top |
| 233 | Office chair-With all nessassary fittings like brackets & Replement of top |
| 234 | Teapoy -With all nessassary fittings like brackets & Replement of top |
| 235 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 236 | Buy back of Dismantling of masonary/CC Bela work (Qty Same as item 107) |
| 237 | Construction of Brick / C.C block masonry wall & pillar of buildings upto plith level in cement mortar of mix 1:5 (1 cement: 5 river sand) with approved size, shape & quality of C.C block as directed including cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc. complete. |
| 238 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. Including supply of all materials, labours, tools & plants and all other charges etc. complete , Roof Slab shuttering |
| 239 | Providing and laying R.C.C. 1:1½:3 (1Cement: 1½ River sand: 3 stone aggregate of 20 mm nominal size) for R.C.C. work of building upto floor 2 level including batching, mixing, laying, compacting ,cost of centering, shuttering, finishing to the exposed faces with10 mm thick plaster in C.M 1:3 (1Cement: 3 River sand) cost of supply of all materials, labours, tools & plants, curing & all other charges etc. complete. Roof Slab |
| 240 | Supplying & placing TMT steel Fe 500D ( TATA/SAIL/VIZAG) reinforcement of approved 1st quality in position for R.C.C. work including straightening, cutting, bending, fixing and binding with approved 1st quality binding wire as per drawings & as directed including cost of supply of all materials, labours, tools & plants and all other charges etc. complete. Fe-500D |
| 241 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete, including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. On Steel Surface |
| 242 | Providing 15mm thick cement plaster in single coat on fair side of brick concrete walls for interior plastering upto floor two lwvel and finished even and smooth in cement morter 1:4 ( 1 cement ,4 sand ) including finishing with with a floating coat of neat cement slurry for plastering and fixing ( inner and external side) hexagonal GI chiken wire mesh of 24 gauge required size with nails /cement at junction of concrete and brick work or between different matrrials etc. including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge. |
| 243 | 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) for Celling plaster, Including scaffolding at all floors/all levels/at all height/all shapes etc complete as per specification and direction of Engineer-in-charge. |
| 244 | Providing and laying plinth protection all around the building as per direction including earth cutting , laying stone packing and laying cement concrete 1:2:4with neat cement finish. Supply of all labour , materials, tools and plaants etc complete. |
| 245 | Demolishing Cement/Concrete/ thick 75mm(Average) manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge, Including cost of all materials,labours, tools & plants etc complete. |
| 246 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of cement slurry mixed with water proofing cement compound consisting of applying:(a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm, (b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm and (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (For the purpose of measurement the entire treated surface will be measured) as per direction of Engineer- in-charge. |
| 247 | Grading roof for water proofing treatment with Cement concrete 1:2:4 thick 62mm(Average)(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) as per direction of Engineer- in-charge. |
| 248 | Providing and fixing Heat Resistant Terrace Tiles /china mosaic with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of Engineer- in-charge.. |
| 249 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender