Defence Government Departments Closing in 17 days TDR #58056669

Bids Are invited for Provision Of Modern Amenities And Sanitary Upgradation Of Office Pantry

Issued by Government Departments · Mumbai, Maharashtra
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
8

Project Description

Bids Are invited for Dismantling And Removal - Removal Of Existing Old Racks Fittings And Worn Out Fixtures Without Causing Structural Damage To Adjoining Walls Or Civil Structure , Surface Preparation - Removal Of Old Wall Tiles, Debris, Clean And Prepare Wall And Floor Surfaces For Fresh Wall Tiling And Carpentry Installation , Debris Disposal - Cleaning And Proper Disposal Of All Dismantled Materials And Site Debris As Guided By Unit Staff , Overhead Wall Cupboards And Storage Units - Fabrication And Installation Of Uppe/Overhead Cupboards Using 18 Mm Is 710 Marine Plywood, Shutters Fitted With Heavy Duty Soft Close Concealed Hinges Ss304 And Sliders For Smooth Operation , Lower Modular Storage And Soft Close Drawers - Fabrication Of Lower Modular Cabinet Base Using 18 Mm Is 710 Marine Plywood, Installation Of Heavy Duty Soft Close Telescopic Drawer Channels Made Of Ss 304 Grade Stainless Steel, Proviusion Of Internal Modular Division And Organiser For Cutlery Utensils And Pantry Supplies , Lamination And Edge Sealing - Exterior- Lined With 1 Mm High Pressure Decorative Laminate Using Water Proof Adhesive, Interior- Lined With 0.8 Mm Balance Liner Laminate. Edge Protection-All Exposed Ply Edges Must Be Machine Sealed Using 2Mm Thick Pvc Edge Banding With Hot Melt Glue To Prevent Moisture Ingress. , Open Utility Racks And Hardware Fittings - Fabrication And Installation Of Open Utility Storage Racks Made Of Ss 304 Grade Or 18 Mm Marine Ply With Laminate Finish For Heavy Storage Appliances Niches Like Microwave Kettle And Drying Racks. Supply And Fitting Of High Grade Magnetic Catches, Tower Bolts And Multipurpose Locks, Supply And Fitting Of High Grade Ss304 Handles, Heavy Duty Magnetic Catches Tower Bolts And Multipurpose Locks , Plumbing And Sanitary - Sink And Drain Pipe Should Be Replaced With New One. All Joints Across The Sink Area Wall Junction Should Be Sealed Using Neutral Cure Antifungal Sanitary Silicone Sealant.

BOQ

Sl. No. Item TitleItem Description
1DISMANTLING AND REMOVALREMOVAL OF EXISTING OLD RACKS FITTINGS AND WORN OUT FIXTURES WITHOUT CAUSING STRUCTURAL DAMAGE TO ADJOINING WALLS OR CIVIL STRUCTURE
2SURFACE PREPARATIONREMOVAL OF OLD WALL TILES, DEBRIS, CLEAN AND PREPARE WALL AND FLOOR SURFACES FOR FRESH WALL TILING AND CARPENTRY INSTALLATION
3DEBRIS DISPOSALCLEANING AND PROPER DISPOSAL OF ALL DISMANTLED MATERIALS AND SITE DEBRIS AS GUIDED BY UNIT STAFF
4OVERHEAD WALL CUPBOARDS AND STORAGE UNITSFABRICATION AND INSTALLATION OF UPPE/OVERHEAD CUPBOARDS USING 18 MM is 710 Marine Plywood, SHUTTERS FITTED WITH HEAVY DUTY SOFT CLOSE CONCEALED HINGES SS304 AND SLIDERS FOR SMOOTH OPERATION
5LOWER MODULAR STORAGE AND SOFT CLOSE DRAWERSFABRICATION OF LOWER MODULAR CABINET BASE USING 18 MM IS 710 MARINE PLYWOOD, INSTALLATION OF HEAVY DUTY SOFT CLOSE TELESCOPIC DRAWER CHANNELS MADE OF SS 304 GRADE STAINLESS STEEL, PROVIUSION OF INTERNAL MODULAR DIVISION AND ORGANISER FOR CUTLERY UTENSILS AND PANTRY SUPPLIES
6LAMINATION AND EDGE SEALINGEXTERIOR- LINED WITH 1 MM HIGH PRESSURE DECORATIVE LAMINATE USING WATER PROOF ADHESIVE, INTERIOR- LINED WITH 0.8 MM BALANCE LINER LAMINATE. EDGE PROTECTION-ALL EXPOSED PLY EDGES MUST BE MACHINE SEALED USING 2MM THICK PVC EDGE BANDING WITH HOT MELT GLUE TO PREVENT MOISTURE INGRESS.
7OPEN UTILITY RACKS AND HARDWARE FITTINGSFABRICATION AND INSTALLATION OF OPEN UTILITY STORAGE RACKS MADE OF SS 304 GRADE OR 18 MM MARINE PLY WITH LAMINATE FINISH FOR HEAVY STORAGE APPLIANCES NICHES LIKE MICROWAVE KETTLE AND DRYING RACKS. SUPPLY AND FITTING OF HIGH GRADE MAGNETIC CATCHES, TOWER BOLTS AND MULTIPURPOSE LOCKS, SUPPLY AND FITTING OF HIGH GRADE SS304 HANDLES, HEAVY DUTY MAGNETIC CATCHES TOWER BOLTS AND MULTIPURPOSE LOCKS
8PLUMBING AND SANITARYSINK AND DRAIN PIPE SHOULD BE REPLACED WITH NEW ONE. ALL JOINTS ACROSS THE SINK AREA WALL JUNCTION SHOULD BE SEALED USING NEUTRAL CURE ANTIFUNGAL SANITARY SILICONE SEALANT.

AI Tender Summary

OUR REF NO 58056669
AUTHORITY Government Departments
TENDER VALUE 2.50 Lakhs
LAST DATE 04-11-2026
Authority
Authority Name Indian Navy
Work Description Bids Are invited for Dismantling And Removal - Removal Of Existing Old Racks Fittings And Worn Out Fixtures Without Causing Structural Damage To Adjoining Walls Or Civil Structure , Surface Preparation - Removal Of Old Wall Tiles, Debris, Clean And Prepare Wall And Floor Surfaces For Fresh Wall Tiling And Carpentry Installation , Debris Disposal - Cleaning And Proper Disposal Of All Dismantled Materials And Site Debris As Guided By Unit Staff , Overhead Wall Cupboards And Storage Units - Fabrication And Installation Of Uppe/Overhead Cupboards Using 18 Mm Is 710 Marine Plywood, Shutters Fitted With Heavy Duty Soft Close Concealed Hinges Ss304 And Sliders For Smooth Operation , Lower Modular Storage And Soft Close Drawers - Fabrication Of Lower Modular Cabinet Base Using 18 Mm Is 710 Marine Plywood, Installation Of Heavy Duty Soft Close Telescopic Drawer Channels Made Of Ss 304 Grade Stainless Steel, Proviusion Of Internal Modular Division And Organiser For Cutlery Utensils And Pantry Supplies , Lamination And Edge Sealing - Exterior- Lined With 1 Mm High Pressure Decorative Laminate Using Water Proof Adhesive, Interior- Lined With 0.8 Mm Balance Liner Laminate. Edge Protection-All Exposed Ply Edges Must Be Machine Sealed Using 2Mm Thick Pvc Edge Banding With Hot Melt Glue To Prevent Moisture Ingress. , Open Utility Racks And Hardware Fittings - Fabrication And Installation Of Open Utility Storage Racks Made Of Ss 304 Grade Or 18 Mm Marine Ply With Laminate Finish For Heavy Storage Appliances Niches Like Microwave Kettle And Drying Racks. Supply And Fitting Of High Grade Magnetic Catches, Tower Bolts And Multipurpose Locks, Supply And Fitting Of High Grade Ss304 Handles, Heavy Duty Magnetic Catches Tower Bolts And Multipurpose Locks , Plumbing And Sanitary - Sink And Drain Pipe Should Be Replaced With New One. All Joints Across The Sink Area Wall Junction Should Be Sealed Using Neutral Cure Antifungal Sanitary Silicone Sealant.
Basic Detail
Tender No GEM/2026/B/8161811
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 15 Oct 2026
Submission Date 04 Nov 2026
Open Date 05 Nov 2026
Finance
Tender Value 2.50 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Available
Document List
de67eb8d-6bac-4f2e-bcaf-7ccb78fc175f.pdf
scope_of_work-pantry_2026-10-14-16-50-49_286da4bf57404c1e1562e612228ec172.pdf
10036183_Boq_1.xlsx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Nov 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
pdf

de67eb8d-6bac-4f2e-bcaf-7ccb78fc175f.pdf

pdf

scope_of_work-pantry_2026-10-14-16-50-49_286da4bf57404c1e1562e612228ec172.pdf

xlsx

10036183_Boq_1.xlsx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender