Tender For Face-Lifting & Essential Maintenance Work At Ayush Hospital, Junglighat Under Sd-I, Svpnd, Apwd, Sri Vijaya Puram.
Tender Value
17.88 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
1 days left
EMD
35778
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Face-Lifting & Essential Maintenance Work At Ayush Hospital, Junglighat Under Sd-I, Svpnd, Apwd, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 2 | For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 4 | Of area 3 sq. metres and below |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 6 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 7 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 8 | 100 mm dia pipe |
| 9 | 75 to 80 mm dia pipe |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 11 | 15 mm to 40 mm nominal bore |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 13 | 20 mm nominal dia Pipes |
| 14 | 25 mm nominal dia Pipes |
| 15 | 40 mm nominal dia Pipes |
| 16 | Providing and fixing PVC pipe of approved quality as per the direction of Engineer-in-charge |
| 17 | 110mm dia PVC pipe |
| 18 | 75mm dia PVC pipe |
| 19 | 65mm dia PVC pipe |
| 20 | 50mm dia PVC pipe |
| 21 | Providing and fixing CPVC union socket of approved quality, Colour and make etc complete. |
| 22 | 40mm dia |
| 23 | 25mm dia |
| 24 | 20mm dia |
| 25 | Providing and fixing ball valve (CPVC) of approved quality etc complete : |
| 26 | 25mm dia nominal bore |
| 27 | 40mm nominal bore |
| 28 | 20mm nominal bore |
| 29 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 31 | Providing and fixing CPVC extension nipple for polythylene water tank pipe fittings of approved quality. |
| 32 | 40mm nominal bore |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 35 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 36 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 37 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 38 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 39 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. |
| 40 | One or more coats on old work. |
| 41 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 42 | Old work (One or more coat applied @0.90 Itr/10 sqm). |
| 43 | Providing and fixing single scaffolding system on the exterior side with 100mm dia bamboo 1.5 mtrs centre to centre horizontal and vertical jointing with coir rope with provided staircase system in the scaffolding for working platform etc and removing it thereafter. The scaffolding system shall be stiffened with bracing, runners connectin with the building etc with essential safety features for the workman etc complee as per the direction and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 45 | One or more coats on old work |
| 46 | Providing and fixing PVC plain bend of required degre. |
| 47 | 110mm dia |
| 48 | 75mm dia |
| 49 | 65mm dia |
| 50 | 50mm dia |
| 51 | Providing and fixing PVC bend of required degree with access door of approved quality. |
| 52 | 100 mm dia |
| 53 | 75mm dia |
| 54 | 65mm dia |
| 55 | 50mm dia |
| 56 | Providing and fixing PVC Tee of approved quality. |
| 57 | 100X100X100mm |
| 58 | 75x75x75mm |
| 59 | 65X65X65mm PVC Tee |
| 60 | 50x50x50mm |
| 61 | Providing and fixing PVC Tee with access door of approved quality as per the direction of Engineer-in-charge. |
| 62 | 100x100x100mm |
| 63 | 75x75x75mm |
| 64 | 65x65x65mm |
| 65 | 50x50x50mm |
| 66 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 67 | 15 mm nominal bore |
| 68 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 69 | 15 mm nominal bore |
| 70 | Providing and fixing CP brass sink cock with raised 'J' shaped swinging spout of approved quality etc complete. |
| 71 | Providing and fixing C.P brass two way bib cock of approved quality. |
| 72 | 15mm nominal bore |
| 73 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 74 | 15 mm nominal bore |
| 75 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 76 | 100 mm diameter |
| 77 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 78 | 45 cm length15 mm nominal bore |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 80 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 82 | Semi rigid pipe32 mm dia |
| 83 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 84 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 85 | 250x16 mm |
| 86 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 87 | 150x10 mm |
| 88 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 89 | 125 mm |
| 90 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 91 | Twin rubber stopper |
| 92 | Providing and fixing CP brass soap dish holder of size 150x100mm of approved make. |
| 93 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 94 | 15 mm nominal bore |
| 95 | Providing and fixing toilet paper holder : |
| 96 | C.P. brass |
| 97 | Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality. |
| 98 | 600mm long towel rail |
| 99 | Providing and fixing stainless steel towel ring of approved quality as per the direction of Engineer-in-charge. |
| 100 | Providing and fixing health faucet with 1.2 m long flexible tube and wall hook (Jaquar (Model No. ALD-573) or equivalent make) of aproved quality. |
| 101 | 15mm dia |
| 102 | Providing and fixing C.P. jali of approved quality |
| 103 | 100mm |
| 104 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 105 | Kitchen sink with drain board510x1040 mm bowl depth 225 mm |
| 106 | Kitchen sink without drain board470x420 mm bowl depth 178 mm |
| 107 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 108 | Providing and fixing G.I. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : |
| 109 | 100mm |
| 110 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 111 | W.C. pan with ISI marked white solid plastic seat and lid |
| 112 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : |
| 113 | 1.60 mm thick with zinc coating not less than 350 gm/m2 |
| 114 | Providing and fixing Pre-Painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Blue Scope stee, Everest industries Ltd, JSW Steel Ltd, Jindal Steel Ltd or equivalent make roofing accessories 0.50 mm (+0.50%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete |
| 115 | Gutter (600mm over all girth) |
| 116 | Providing and fixing stainless steel Imax hinges with necessary screws for aluminium windows etc complete as per the direction of Engineer-in-charge. |
| 117 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. |
| 118 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. |
| 119 | Providing and fixing 12 mm thick WPC board in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 120 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 121 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 122 | 10 litre capacity - White |
| 123 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 124 | White solid plastic seat with lid |
| 125 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 126 | 50 mm average thickness |
| 127 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect. |
| 128 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 129 | Providing and laying water proofing treatment to vertical and horizontal surfaces with Dr. Fixit Fastflex compound of high performance polymer modified cementious coating including mixing in proper ratio and applying in two coats @ 2kg/sqm (First coat shall be allowed to air cure for 6-8 hours before applying second coat) etc completed as per the direction of Engineer-in-charge. |
| 130 | Providing and fixing PVC cowl of approved quality |
| 131 | 110mm |
| 132 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 133 | 12 mm cement plaster of mix: |
| 134 | 1:4(1 cement: 4 fine sand) |
| 135 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. |
| 136 | 205 X 19 mm |
| 137 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 138 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 139 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 140 | Neat cement punning. |
| 141 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 142 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 143 | Providing and fixing ball bearing for rolling shutters. |
| 144 | Applying priming coat: |
| 145 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) |
| 146 | Providing and fixing CP Pillar cock of approved quality colour and make |
| 147 | 15mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender