Tender For Repair / Replacement Of Certian B&R Items In Mh, Fd Hosp, Cbrn, Stn Hq, Coi And Fmsd Area Under Aor Under Age B&R-I Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
49 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Certian B&R Items In Mh, Fd Hosp, Cbrn, Stn Hq, Coi And Fmsd Area Under Aor Under Age B&R-I Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 2 | M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed |
| 3 | Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed |
| 4 | M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 5 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 6 | M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra complete all as specified and directed |
| 7 | M & L 15 mm thick rendering in CM (1:4) using water proofing compound as per manufacturerer's instruction (WPC to be measured & paid separately) on brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed |
| 8 | M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chhajas etc; in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed |
| 9 | M&L for applying two coats of weather proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed |
| 10 | M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed |
| 11 | M&L for applying two coats of oil bound destemper ( to match with the adjacent shade or tint) over a coat of chalk whitening on old plastered wall surfaces including applying 1mm wall putty to make up depression etc and to the surface even & smooth including preparation of these surfaces complete all as specified and directed |
| 12 | M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directed |
| 13 | M & L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces complete all as specified and directed |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 15 | Roughning of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified and directed |
| 16 | M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed |
| 17 | M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete all as specified and directed |
| 18 | M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed |
| 19 | M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified including 10mm thick plaster in CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed. |
| 20 | S&F in repairs Stainless steel galvanised wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed |
| 21 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed |
| 22 | S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed |
| 23 | M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed |
| 24 | Taking up or down 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed |
| 25 | Taking up or down 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed |
| 26 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed |
| 27 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed |
| 28 | S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed |
| 29 | S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and directed |
| 30 | S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union complete all as specified and directed |
| 31 | S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed |
| 32 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed. |
| 33 | S & F in repair PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed |
| 34 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 35 | S & F in repair 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified and directed |
| 36 | S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed |
| 37 | S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed |
| 38 | S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed |
| 39 | S & F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 40 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed |
| 41 | S & F in repairs 15mm bore fancy type chromium plated CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified (make - prayag, Kingstone,SEIKO ) complete all as specified and directed |
| 42 | S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 43 | S&F in repairs for three layer Rotational moulded polythlene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with dismantling of tank all as specified in SSR Part I complete all as specified and directed |
| 44 | S&F in repairs for three layer Rotational moulded polythlene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with dismantling of tank all as specified in SSR Part I complete all as specified and directed |
| 45 | S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed |
| 46 | S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc complete all as specified and directed |
| 47 | S & F 110 mm bore, PVC (SWR) fittings such as bends of any radious, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed |
| 48 | S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 49 | S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. |
| 50 | Supply and Fixing in repairs vitreous china wash down water closet pan wall hanging single piece (with flushing cistern EWC) 'P' trap, with and including white coloured closed pattern plastic seat cover, hand faucet and including mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 51 | Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified and directed |
| 52 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directed |
| 53 | S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed |
| 54 | S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directed |
| 55 | S&F in repairs oval access doors to cast iron pipes of 75 mm bore with rubber washer & bolts & nuts as required complete all as specified and directed |
| 56 | S & F in repairs CI bends any radius, 75 mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed |
| 57 | S & F in repairs 200 mm SS , barrel tower bolts of extruded section complete all as specified and directed |
| 58 | Supply and fixing in repair 150 mm long SS handle , fabricated type, anodised and fixed complete all as specified and directed. |
| 59 | S & F 200 mm Steelnees steel , barrel tower bolts of extruded section complete all as specified and directed |
| 60 | Supply and fixing 150 mm long SS, fabricated type, anodised and fixed complete all as specified and directed. |
| 61 | S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed |
| 62 | S&F for SS sliding door bolt fancy type 250 mm long stove enamelled black with bright bolt etc.complete all as specified and directed |
| 63 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed |
| 64 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed |
| 65 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed |
| 66 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including taking down existing frame and remove to store and necessary finishing of wall for fixing of frame complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 67 | Ditto all as per item above but of double shutter frame size 65 x 100mm complete all as specified and directed |
| 68 | Ditto all as per item above but of double shutter frame size 65 x 125 mm complete all as specified and directed |
| 69 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing including and taking down old shutter and remove to store and supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos. per leaf(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf |
| 70 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed and skeleton shutters of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter including taking down old shutter remove to store and supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos. per leaf(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leafMake : Rajshri/Sintax/Jindal as approved. as approved by GE with necessary fixing arrangement of required size complete all as specified and directed |
| 71 | Dismantling boarding any description fixed in any position with rails incl fillets complete all as specified and directed |
| 72 | S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, fixed with screws to timber frame work and steel frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified and directed |
| 73 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed |
| 74 | M&L Providing and fixing factory made uPVC white colour casement (Sliding) window of area exceeding 1 Sqm but not exceeding 2.0 sqm each /window two track made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and stainless steel wire mesh cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or stainless wire staple. including taking down of existing windows and removing to store, and making good with plastering/rendering etc around the finished opening of the disrubed surface with CM 1:4 complete all as specified and directed(Note :- 5mm thick plain Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) |
| 75 | Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed |
| 76 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 77 | M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and incl 25mm thick sand bed /cushioning,complete all as specified and as directed |
| 78 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 79 | M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed |
| 80 | M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition of stone slab and tiles of any description or thickness and laid bedded on any mortar in floor, apron etc complete all as specified and directed |
| 81 | M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition of stone slab and tiles of any description or thickness and laid bedded on any mortar in floor, apron etc complete all as specified and directed |
| 82 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations incl rubbing and polishing ( Granite finish) etc complete all as sspecified and directed |
| 83 | M & L for Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed |
| 84 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 85 | S&F in repair cast iron body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed |
| 86 | S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates with powder coating (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and directed |
| 87 | S & F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the complete all as specified and directed |
| 88 | Repair to aluminium door shutter ,window,sliding window ,ventilator partition by replacing joining cleat glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directedNote:- Sheet glass, particle board will be measured and paid separately if provided at site. |
| 89 | M & L prelaminated partical board 12mm thich interior grade, prelaminated one side with decorative choice lamination fixed with screw to timber/aluminiumframe with snap grid complete all as specified and as directed |
| 90 | S&F in repairs 5.5mm thick sheet glass ordinary quality and fitting with PVC rubber beading for door and windows in squares exc 0.50 sqm in each pane complete all as specified and directed |
| 91 | S&F in repairs brass 4 lever mortice lock, vertical type size 100 mm comlete all as specified and as directed. |
| 92 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed |
| 93 | S & F anodized aluminium snap grid frame work for false ceiling grid 605mm x 605mm etc complete all as specified and directed |
| 94 | S & F in repair 12mm thick eco board thick as in ceiling fixed with screw as per manufacturers instructions etc complete all as specified and directed |
| 95 | M & L aluminium composite panel fitting with PVC rubber beading for door and windows in squares fixed with screw to aluminiumframe with snap grid complete all as specified and directed |
| 96 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed |
| 97 | S&F hollow PVC Wall (panelling) Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame / plastered surfaces with necessary nails as per specifications and drawing lining board complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender