Tender For Repair To Joinery , Flooring , Roofing , Ceiling, Plumbing Work And Periodical Services And Repair To Drain ,Compound Wall, Fencing And Cleaning/Repairs To Sewage Line , Manholes,Soakage Well & Septic Tank At Nlp Mil Stn Under Ge 872 Ews
Tender Value
25 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
22 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakhimpur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery , Flooring , Roofing , Ceiling, Plumbing Work And Periodical Services And Repair To Drain ,Compound Wall, Fencing And Cleaning/Repairs To Sewage Line , Manholes,Soakage Well & Septic Tank At Nlp Mil Stn Under Ge 872 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Natural Ground including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed.NOTE : Excavating in Post Holes will be Measured and Paid for separately under appropriate Items. |
| 2 | Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Cement Concrete including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed.NOTE : Excavating in Post Holes will be Measured and Paid for separately under appropriate Items. |
| 3 | Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. including Serviceable Bricks keep in Safe custody for reuse at Site, complete all as specified and as directed. |
| 4 | Dismantling Wrought Iron or Mild Steel Work of any description including Serviceable Wrought Iron or Mild Steel keep in Safe custody for reuse at Site, complete all as specified and as directed. |
| 5 | Dismantling Structural Steel Work including Doors, Gates but excluding Framed Ttruss etc., complete all as specified and as directed. |
| 6 | Dismantling Fencing Wire Mesh of any description including Serviceable Chain Link Fencing keep in Safe custody for reuse at Site, complete all as specified and as directed. |
| 7 | Dismantling Barbed Wire of any description, Segregating the Serviceable Barbed Wire and Stacking properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.NOTE : Each Line of Barbed Wire will be Measured for Payment. |
| 8 | Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and Removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. |
| 9 | M&L Cement Concrete 1:3:6 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. for embedding /fixing RCC Fencing Posts or Struts including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 10 | M&L Pre-cast Cement Concrete Block Masonry with Solid Block of Size 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregates), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed. |
| 11 | M&L Framed Work in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and Hanging; also Fastening and fixing, conforming to Fe-290, Gde E-165, complete all as specified and as directed. |
| 12 | M&L Mild Steel Works such as Posts and Struts in Fencing including cutting Tops to shape as directed, drilling holes, notching for Wire, etc.; including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 13 | M&L Mild Steel Flat Iron 40x4.0mm (Fillet for securing Wire Mesh, etc.) cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 14 | M&L Mild Steel Round Bars 10mm dia in Horizontal support for Chain Link Straining of Fencing, cut to length bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 15 | Re-fixing only Mild Steel Round Bars 10mm dia (Serviceable Mild Steel Round Bars obtained from Item No. 14 here-in-before) in Horizontal support for Chain Link Straining of Fencing, cut to length bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 16 | M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt not exc. 5.0 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed. |
| 17 | Supply only Chain Link Fencing 100mmx100mm or 75mmx75mm mesh with 3.15mm/4.0mm dia Mild Steel Galvanised Wire (as ordered), complete all as specified and as directed. |
| 18 | Fixing only Chain Link Fencing including Line Wires, any mesh, size and type to any type of Standards, Rails, Straining Bolts, etc. including Provission of Mild Steel Binding Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 19 | S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc. and Fixed-in-repairs, complete all as specified and as directed.NOTE : Each Line of Barbed Wire will be Measured for Payment. |
| 20 | Re-fixing only Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia (Serviceable Barbed Wire obtained from Item No. 7 here-in-before) barbed with 2mm dia Barbs at 75mm spacings inluding Restraining, resecuring and Making Good Staples, etc. and fixing to any type of Standard Rails straining Bolts, securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc. and Fixed-in-repairs, complete all as specified and as directed.NOTE : Each Line of Barbed Wire will be Measured for Payment. |
| 21 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 22 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed. |
| 23 | M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed. |
| 24 | M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Black Bituminous Paint (as approved) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed. |
| 25 | Taking up or down PVC (SWR) Soil, Waste and Ventilating Pipes with Fittings of any description from any Situations, complete all as specified and as directed. |
| 26 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:6, complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items. |
| 27 | M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 28 | M&L TMT Bars 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 29 | M&L Cast Iron Floor Trap, Diameter of Outlet in 75mm, Plain with Grating including Jointing with Waste Pipe, Set in Cement Concrete 1:2:4 (20mm graded Aggregate) and Fixing-in-repairs, complete all as specified and as directed. |
| 30 | M&L PVC (SWR) Floor Trap having Diameter of Outlet in 75mm, Plain with Grating including Jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 31 | S&F PVC (SWR) Gully Trap 125/110mm bore (dia), setting and jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 32 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed. |
| 33 | S&F PVC (SWR) 75mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, Jointing with Solvent Cement, complete all as specified and as directed. |
| 34 | S&F PVC (SWR) 75mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, Jointing with Solvent Cement, complete all as specified and as directed. |
| 35 | S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., Jointing with Solvent Cement, complete all as specified and as directed. |
| 36 | S&F PVC (SWR) Vent Cowl 75mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed. |
| 37 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed. |
| 38 | S&F PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, Jointing with Solvent Cement, complete all as specified and as directed. |
| 39 | S&F PVC (SWR) 110mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, Jointing with Solvent Cement, complete all as specified and as directed. |
| 40 | S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., Jointing with Solvent Cement, complete all as specified and as directed. |
| 41 | S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed. |
| 42 | M&L Removing and/or Cleaning Blockage of Floor Trap, Nahani Trap, etc. by any means of Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 43 | M&L Removing and/or Cleaning Blockage of WC by any means of Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 44 | M&L Removing/Cleaning Blockage of Sewer Line 100/110mm bore (dia), Manually by rodding from Manholes, Septic Tank, etc. and Cleaning of Sewer Line by Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 45 | M&L Removing/Cleaning Blockage of Sewer Line 150/160mm bore (dia), Manually by rodding from Manholes, Septic Tank, etc. and Cleaning of Sewer Line by Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 46 | M&L Removing/Cleaning Blockage of Sewer Line 200mm bore (dia), Manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 47 | M&L Removing/Cleaning Blockage of Sewer Line 250mm bore (dia), Manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 48 | M&L Removing/Cleaning Blockage of Sewer Line 300mm bore (dia), Manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 49 | M&L Cleaning GULLY TRAP, Depth not exc. 0.50 METRE by opening Cover and taking out accumulated Garbage, Brick Bats, Silts or any other Items, re-fixing the Cover after cleaning of Gully Trap, removing and carrying Brick Bats, Garbage, Silts, etc. to a distance exc 50 Metre but not exc 100 Metre and burried (minimum 300mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 50 | M&L Cleaning MANHOLE, Depth not exc. 0.50 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg Per Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 51 | M&L Cleaning MANHOLE, Depth exc. 0.50 METRE not exc. 1.00 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg Per Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 52 | M&L Cleaning MANHOLE, Depth exc. 1.00 METRE and not exc. 1.50 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg Per Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 53 | M&L Cleaning MANHOLE, Depth exc. 1.50 METRE and not exc. 2.00 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg Per Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TEICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 54 | M&L Cleaning MANHOLE, Depth exc. 2.00 METRE and not exc. 3.00 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg Per Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 55 | M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from SEPTIC TANKS, etc., (Depth not exc. 1.50 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge.(c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted Unit Rate. |
| 56 | M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 LITRE capacity) from SEPTIC TANKS, etc, (Depth exc. 1.50 METRE but not exc. 3.00 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE-in-Charge.(c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted Unit Rate. |
| 57 | M&L Preparing New Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed. |
| 58 | M & L for Providing Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in width and setting in mortar 1:6 complete all as specified and directed. |
| 59 | M&L Cutting Holes in Brick/ Pre-cast Concrete Block Walling, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed. |
| 60 | Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed. |
| 61 | M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 62 | M&L Rendering (External) 15mm thick on Brick/Concrete Blocks or Works consisting in 2 layers(10mm+5mm) in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item. |
| 63 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 64 | M&L Preparing New Plastered Surfaces of Walls and Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whiting (Priming Coat), complete all as specified and as directed. |
| 65 | M&L Preparation old decorated surfaces of walls including cornices , pilasters etc by brooming down or by steel wire brushing, scraping down smokes soot, moulds, moss and efflorcent salt and treating oil and greasy spot and Applying One Coat of White Wash, complete all as specified and as directed. |
| 66 | M&L Preparation old decorated surfaces of walls including cornices , pilasters etc by brooming down or by steel wire brushing, scraping down smokes soot, moulds, moss and efflorcent salt and treating oil and greasy spot and Applying One Coat of colour Wash, complete all as specified and as directed. |
| 67 | M&L Preparation old decorated surfaces of walls/chajjas/asbestos cement building , etc including cornices , pilasters etc by brooming down or by steel wire brushing, scraping down smokes soot, moulds, moss and efflorcent salt and treating oil and greasy spot and Applying One Coat of cement base paint, complete all as specified and as directed. |
| 68 | M&L Preparation old decorated surfaces of walls etc including cornices , pilasters etc by brooming down or by steel wire brushing, scraping down smokes soot, moulds, moss and efflorcent salt and treating oil and greasy spot and Applying One Coat of oil emulsion completeint, complete all as specified and as directed. |
| 69 | M&L for preparation of Old Painted Wood and wood surface of any description, exc. 10 Cm in Width or Girth, not otherwise described and Applying One Coat of Synthetic Enamel Paint , complete all as specified and as directed. |
| 70 | M&L Preparation of Old Painted Steel and Iron Surfaces of any description ,not otherwise described , over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint complete all as specified and as directed. |
| 71 | M&L for preparation of old treated concrete , brick or plastered surfaces of walls etc of any description area n exc. 0.5 sqm and applying one coat of synthetic enamel paint as in base area for writing letters etc. complete all as specified and as directed. |
| 72 | M&L for Writing Letters or Figures (Block. Roman, Italic or Indian) not exc. 30 cm height with synthetic enamel , complete all as specified and as directed. |
| 73 | M&L for Writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc. with White Synthetic Enamel Paint complete all as specified and as directed. |
| 74 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed. |
| 75 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed. |
| 76 | M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed. |
| 77 | S&F Flush Shutter 30mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed. |
| 78 | M&L Second Class Hardwood (well seasoned) Panelled Shutter 35mm thick (any number Panels) Plain, Framed with Lock Rails, having Panels of 12mm thick Veneered Particle Board medium density, Wood Particle Board with commercial Face Veneers and fitted to Chowkat, complete all as specified and as directed. |
| 79 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars to receive Gauge/Glass, any numbers, Sizes of Members of Shutter as specified in SSR Part-I, Section 8, Clause 8.24(b) and fitted to Chowkat, complete all as specified and as directed. |
| 80 | S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed. |
| 81 | S&F Aluminium alloy, anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section and Fixed-in-repairs, complete all as specified and as directed. |
| 82 | S&F Stainless Steel Butt Hinge 100mm in Size, complete all as specified and as directed. |
| 83 | S&F Aluminium Handle 150mm, Cast type, anodised, complete all as specified and as directed. |
| 84 | S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor and Fixing-in-repairs, complete all as specified and as directed. |
| 85 | S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and Fixed-in-repairs, complete all as specified and as directed. |
| 86 | S&F Door Closer Aluminium (Die-cast) Body, Hydraulically Regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 KG to 80.00 KG and Fixed-in-repairs, complete all as specified and as directed. |
| 87 | M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and Applying Two Coats of Synthetic Enamel Paint (1st quality Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed. |
| 88 | Dismantling timber scantlings 40 sq. cm framed work and over in section, in any position |
| 89 | S & F Second class hard-wood wrought timber framed and fixed in scantlings fixed in repair, complete all as specified and directed |
| 90 | M&L Preparing Previously Untreated Surfaces of Wood and Wood Based Materials of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. |
| 91 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 92 | S & F aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket all as specified & directed. |
| 93 | S & F Mortice latch 75mm with two levers (vertical type), aluminium, anodised body and fixed |
| 94 | S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 95 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain Color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & Gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement and fixing in the Frame with Butt Hinges as per Site as per Specification and Drawing of MES Schedule, complete all as specified and as directed.NOTE : Butt Hinges will be Measured and Paid separately under appropriate Item. |
| 96 | S&F Aluminium anodised Barrel Tower Bolt, 125mm long, Extruded Section, complete all as specified and as directed. |
| 97 | S&F Stainless Steel Butt Hinge 75mm in Size, complete all as specified and as directed. |
| 98 | S&F Aluminium Handle 125mm, Cast type, anodised, complete all as specified and as directed. |
| 99 | Taking down/out Unserviceable Rusted/Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed. |
| 100 | M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. |
| 101 | Hacking out Broken Glass of any description from Wooden or Metal Frames, or Stone, Concrete or Brick surrounds of any Thickness or Size; Hacking out Old Putty or Removing Beads, etc., complete all as specified and as directed. |
| 102 | S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 103 | Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Seggregating Serviceable Steel Sheeting and keep in Safe Custody for Refixing, complete all as specified and as directed. |
| 104 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 105 | Re-fixing only Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured (Serviceable Sheet obtained from Item No. 7 here-in-before), fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 106 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 107 | Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed. |
| 108 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified and as directed. |
| 109 | S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs and/or Trusses by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed. |
| 110 | S&F HSPC Non-Asbestos Fibre Cement Building Boards 6.0mm thick in Ceiling, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed. |
| 111 | Taking down of Wall panelling and similar work, complete all as specified and directed |
| 112 | S & F pvc panel for wall including pvc fillet fixing to wall to make pvc frame, complete all as specified and directed |
| 113 | M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 114 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed. |
| 115 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular/ Square), Area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 116 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular/ Square), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. |
| 117 | M&L Vitirified Ceramic Tiles 10mm thick (Square/Rectangular) in Light shade (as approved), Polished, Area of Each Tile not exc. 0.36 Square Metre in Floors, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. |
| 118 | M&L Coloured Glazed Ceramic Tiles 300x200x7.0mm thick (1st quality as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. |
| 119 | Taking down steel tubing 15 mm bore and connections and removal to store complete all as specified & directed. |
| 120 | S & F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 13.5 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 121 | Taking down steel tubing 20 mm bore and connections and removal to store,complete all as specified & directed. |
| 122 | S & F 25mm CPVC pipes SDR 11 & Plain CPVC SDR 13.5 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 123 | Supply & fix 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed. |
| 124 | M&L Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts (if required), Heavy Hooks (Stay) for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Clamps; Holdfasts (Flat Iron 25x4.0mm); Wall Ties; Hooks for Hanging Fans; Plain Angle Cleats for securing Purlins to Wood Trusses or Rafters; Knee Piece inserts; 2-way and 3-way Straps, Plate Washers and Similar Small Articles, conform to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 125 | S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms |
| 126 | S & F in repair for 15mm push tap any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47 gms/20 mm-75 gms), complete all as specified and directed |
| 127 | S & F in repair for 15mm Bib tap standard of PTMT any colour high pressure screwed, for iron pipe and fixed, (Minimum weight 15mm -90 gms/20 mm -125 gms) complete all as specified and directed |
| 128 | S & F in repair for 15mm Bib tap fancy type of PTMT any colour high pressure screwed, for iron pipe and fixed, (Minimum weight 15mm -105 gms) complete all as specified and directed |
| 129 | S & F in repair for 15mm Bib tap fancy type with long body of PTMT any colour high pressure screwed, for iron pipe and fixed, (Minimum weight 15mm -95 gms) complete all as specified and directed |
| 130 | S & F in repair for 15mm Pillar tap of PTMT any colour high pressure screwed, for iron pipe and fixed, (Minimum weight 15mm -110 gms) complete all as specified and directed |
| 131 | S & F in repair for 15mm Pillar tap fancy type of PTMT any colour high pressure screwed, for iron pipe and fixed, (Minimum weight 15mm -110 gms) complete all as specified and directed |
| 132 | S & F in repair for 15mm stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm -90 gms/ 20 mm-92 gms) |
| 133 | S & F in repair for 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 134 | S & F for 20mm Brass Elbow, complete all as specified and directed |
| 135 | S & F for 25mm Brass Elbow, complete all as specified and directed |
| 136 | S & F for 20mm Male Brass Threaded Adaptor (MTA/MBTA), complete all as specified and directed |
| 137 | S & F for 25mm Male Brass Threaded Adaptor (MTA/MBTA), complete all as specified and directed |
| 138 | S & F for 20mm Female Brass Threaded Adaptor (MTA/MBTA), complete all as specified and directed |
| 139 | S & F for 25mm Female Brass Threaded Adaptor (MTA/MBTA), complete all as specified and directed |
| 140 | S & F for 20mm Tank Adaptor, complete all as specified and directed. |
| 141 | S & F for 25mm Tank Adaptor, complete all as specified and directed. |
| 142 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Long Body with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. |
| 143 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. |
| 144 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 145 | S&F Stop Cock/Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 146 | S&F Angle Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 147 | S&F Gun Metal Globe/Gate Valve 15mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 148 | S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 149 | S&F Gun Metal Globe/Gate Valve 25mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 150 | M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylin-drical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, Hoisted and Fixed in Position all as specified in MES Schedule and Providing Water Connections including Lowering down Unserviceable Water Storage Tank of any description after disconnecting of Water Supply Connections, complete all as specified and as directed. |
| 151 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylin-drical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, Hoisted and Fixed in Position all as specified in MES Schedule and Providing Water Connections including Lowering down Unserviceable Water Storage Tank of any description after disconnecting of Water Supply Connections, complete all as specified and as directed. |
| 152 | S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixed-in-repairs, complete all as specified and as directed. |
| 153 | S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixed-in-repairs, complete all as specified and as directed. |
| 154 | S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 155 | S&F PTMT Ball Valve 25mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 156 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of Capacity exc. 250 Litre and not exc. 500 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \\"CLEANED ON : DD.MM.YYYY\\" of Height exc. 50mm and not exc. 100mm with Synthetic Enamel Paint (White), complete all as specified and as directed. |
| 157 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of Capacity exc. 500 Litre and not exc. 1000 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \\"CLEANED ON : DD.MM.YYYY\\" of Height exc. 50mm and not exc. 100mm with Synthetic Enamel Paint (White), complete all as specified and as directed. |
| 158 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of Capacity exc. 1000 Litre and not exc. 2000 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \\"CLEANED ON : DD.MM.YYYY\\" of Height exc. 50mm and not exc. 100mm with Synthetic Enamel Paint (White), complete all as specified and as directed. |
| 159 | M&L Disconnecting all the Pipe Connections, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of Capacity exc. 2000 Litre and not exc. 3000 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters \\"CLEANED ON : DD.MM.YYYY\\" of Height exc. 50mm and not exc. 100mm with Synthetic Enamel Paint (White), complete all as specified and as directed. |
| 160 | M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, SWG ‘P’ or ‘S’ Trap, Providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding Provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 161 | S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with SWG ‘P’ or ‘S’ Trap, Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 162 | S&F White Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat Bottom and Cover and Mild Steel Chromium Plated or Aluminised Hinging Device and Fixed-in-repairs, complete all as specified and as directed. |
| 163 | S&F Hand Shower (Health Faucet) with Inner Flexible Tube not less than 1.20 Metre in Length and Wall Hook, Fixed-in-repairs, complete all as specified and as directed. |
| 164 | S&F Toitet Paper Holder, Vitreous China, Coloured, Box type of approved Size with Brass Chromoum Plated with Rod to hold Paper Roll, fixed to Walls with Brass Chromium plated Screws and Fixed-in-repairs, complete all as specified and as directed |
| 165 | S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type, ISI Marked (IS:7231) with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 166 | S&F Vitreous China White Wash Hand Basin of Size 550x400mm, Flat Back including Brass Chromium plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, Chain, Plug & Porocelain Stopper and Fixed-in-repairs, complete all as specified and as directed. |
| 167 | S & F in repair Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) , complete all as specified and directed |
| 168 | S&F Basin Mixer 15mm bore (dia), Brass Chromium Plated, suitable for mixing Hot & Cold Water, screwed down for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 169 | S&F Kitchen Sink with Drainage Board made of Stainless Steel l.0mm thick of Overall size 915x460mm having Bowl size 410x330x160mm with Plugs, Washers and Stainless Steel Waste Fittings, etc. including bedding in Cement Mortar to dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 170 | S&F Vitreous China White Urinal, Half Stall type (excluding Flushing Cistern, Flush Pipe and Waste Pipe) including Providing and Fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, fixing Urinal Spreder of Brass Chromium plated, Flush Pipe, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe) and Fixed-in-repairs, complete all as specified and as directed. |
| 171 | S&F PTMT Waste Coupling of Size 32mm having Minimum Weight 45 Gram (Half or Full threaded) and Fixed-in-repairs, complete all as specified and as directed. |
| 172 | S&F PVC Waste Pipes 32mm/40mm bore (dia) suitable for Wash Hand Basin, Sinks, Urinals, etc. and Fixed-in-repairs, complete all as specified and as directed. |
| 173 | S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed. |
| 174 | S&F PVC Connection Pipe 15mm in Size and 600mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed. |
| 175 | S&F Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 176 | S&F Wall (Bath) Mixer 15mm bore (dia), Brass Chromium Plated, suitable for mixing Hot & Cold Water, screwed down for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 177 | S&F Soap Dish not less than 125mm in Size (as approved) Chromium Plated and fixing to Walls with Screws and Fixed-in-repairs, complete all as specified and as directed. |
| 178 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair) and Fixed-in-repairs, complete all as specified and as directed. |
| 179 | S&F PVC Mirror Cabinet Box type of Size 600x450x150mm, Colured with Mirror of Selected quality Glass 4.0mm thick, fixing to Walls with and including Brass Chromium Plated Screws (minimum 4 No.) and Fixed-in-repairs, complete all as specified and as directed. |
| 180 | S&F Looking Mirror Size 600x450mm, 5.5mm thick Selected quality Glass, Bevelled edge, mounted on 4.0mm thic PVC Sheet with PVC/PTMT Frame, fixed to Wooden Plug with Brass Chromium Plated Screws and Fixed-in-repairs, complete all as specified and as directed. |
| 181 | S&F Glass Shelf Assembly (as approved) consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium Plated Bracket Guard and Railing 60 Cm long and Fixed-in-repairs, complete all as specified and as directed. |
| 182 | S&F Stainless Steel Grating Doom 75mm dia with Waste Holes, Chromium Plated (as approved) and Fixed-in-repairs, complete all as specified and as directed. |
| 183 | S&F Stainless Steel Grating Doom 100mm dia with Waste Holes, Chromium Plated (as approved) and Fixed-in-repairs, complete all as specified and as directed. |
| 184 | M&L Cast Iron Floor Trap with Grating having Diameter of Outlet in 75mm including Jointing to Waste Pipe fixing in Cement Concrete type 1:2:4 (20mm graded stone aggregate) and Fixed-in-repairs, complete all as specified and as directed. |
| 185 | S&F decorative wall paper fixed to wall, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender