Tender For Special Repairs To Office Roof, False Ceiling, Walls, Doors And Other Repair Works In 4Th Floor Of Ig Registration Office, Santhome High Road, Chennai-28.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2026
18 days left
EMD
13856
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Office Roof, False Ceiling, Walls, Doors And Other Repair Works In 4Th Floor Of Ig Registration Office, Santhome High Road, Chennai-28.
BOQ
| Sl. No. | Item Description |
| 1 | Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges and handling charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the departmental officers. |
| 2 | Initial height 3.00 RM |
| 3 | Additional height 2.50 RM |
| 4 | Dismantling , removing and carefully stacking Doors & windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 5 | Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers. |
| 6 | Dismantling and removing False ceiling and Puff sheet etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 7 | Supply and installation of two-track sliding UPVC windows shall utilize UPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 112mm x 52mm x 112mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, wherever required, with a 1mm thick GI steel section. Each window is to be equipped with various security devices, such as touch locks or crescent locks, along with nylon rollers and an aluminium track for smooth operation, all supplied as per requirements, compliant with relevant specifications, and as directed by departmental personnel. The windows shall incorporate 5mm thick Plain or Pinhead glass, held securely by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash are to be mitred cut and fusion welded without any mechanical joints, with all welded joints neatly trimmed and finished with a grooved nib to ensure the final products are free from sharp edges. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant will be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as directed by the department officers. |
| 8 | Renewing and refixing the damaged aluminium anodized powder coated matt finish fully PLB partition with 63.50 x 38.10 x 1.28mm extruded box section at bottom, vertical and horizontal members. The vertical members are spaced at 80mm centre to centre to horizontal members are spaced at 0.80M, 1.60M and 2.40M height from the floor level. Panels should be covered with 9mm thick both side PLB exterior grade with necessary accessories like rubber beedings, aluminium clips, screws etc. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specificaitons for an average wall thickness of not less than 15 microns. The rate is inclusive of cost of materials, conveyance, scaffolding charges if any required etc and necessary dismantling making holes in RCC (or) masonry works with power drill and redoing the same to the original condition after fixing the partition etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 9 | Renewing and refixing the aluminium door 1/2 glazed and 1/2 panelled using anodized Powder coated matt finish aluminium door with frame made out of 47.62 x 44.45 x 1.18mm for vertical, top, horizontal and middle. Bottom, horizontal made out of frame size 101.60 x 44.45 x 1.20mm and the door panel top 1/2 portion is fixed with 5mm thick plain / glass and bottom half portion fixed with 9mm thick novapan board includng necessary accessories like alumnium clips, rubber beedings, door handle, door closer, furniture fittings, screws etc and also inclusive of labour charges for dismantling the exisitng masonryor RCC works and making holes required with power drill, power consumption charges fixing the door frame and shutter frame in position redoing the dismantled portion to the original condition etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 10 | Renewing and refixing with new design ornamental sound proof Armstrong grid false ceiling arrangements with alu. anodized T section and L angle frame work grid of size 60x60cm with Aluminium T section 25x25x2.8mm L angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S rods with suitable threaded nuts, suspended rod and hanging from ceiling at 1.20m c/c in longitudinal section and 60cm at middle portion 60x60cm panel should be covered with 12mm thick Armstrong sheet in grid so as to give neat finishing etc., complete complying with standard specification and as directed by the Departmental officers. |
| 11 | Providing and fixing 50 mm thick factory-manufactured PUF insulated sandwich panel roofing, comprising pre-painted hot-dip galvanized steel sheets on both faces of 5mm thick with rigid, high-density Polyurethane Foam (PUF) insulation core, including all necessary accessories, flashings, ridge covers, profile fillers, fasteners, sealants and complete installation over the existing/proposed structural framework. The colour of puff sheet will be as approved by departmental officers. |
| 12 | Renewing the damaged vertical blinds with new horizontal zebra fabric roller blinds of superior quality double ply plinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,complete complying with standard specification and as directed by the departmental officers at site of work. |
| 13 | Paving the floor with best quality vitrified Tiles of size 600x600x8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Cleaning the surface thoroughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsequantly wash with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plastes and cured cement mass will be removed to make the surface clean and applying Gal tech CT epoxy virigen solvent free anti corrosive two pack resin 50 + Hardner 50 (1 coat) as primer impregnated with 110 GSM class cloth over that apply C.T. Epoxy two coats as finish that will for's FRB lining etc. complete and as direted by the departmental officers. |
| 15 | Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 - 10 cu.m. etc., Complete complying with standard specification and as directed by the Departmental officers. |
| 16 | Flooring with ceramic tiles of size 305x305x8mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 17 | Dadooing walls tiles of size 300x600x10mm best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 18 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) (Brand : Parryware, Hindware Homes, ESSCO, Kohler or Equivalent) |
| 19 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). (Brand : Parryware, Hindware Homes, ESSCO, Kohler or Equivalent) |
| 20 | Renewing the damaged broken unservicewable Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. (Brand : Parryware, Hindware Homes, ESSCO, Kohler or Equivalent) |
| 21 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 22 | Renewing the damaged broken unservicable Soap dish with new one of colour porcelin Soap dish of size150mmx150mmx50mm approved quality and make including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 23 | Supplying and fixing in position 15mm dia special type SS Long body tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) (Brand : Parryware, Hindware Homes, ESSCO, Kohler or Equivalent) |
| 24 | Supplying and fixing position CI Nahani Trap / Floor Trap of size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 25 | Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work. (Brand : Finolex Industries / Ashirvad pipes / Astral pipes or Equivalent) |
| 26 | 20mm dia UPVC pipe |
| 27 | Renewing and refixing following UPVC special of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work. (Brand : Finolex Industries / Ashirvad pipes / Astral pipes or Equivalent) |
| 28 | 20mm dia UPVC Elbow |
| 29 | 20mm dia UPVC Tee |
| 30 | 20mmx15mm dia UPVC Elbow |
| 31 | 20mmx15mm dia UPVC Tee |
| 32 | 20mm dia UPVC Coupler |
| 33 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level. (Brand :Finolex Industries / Ashirvad pipes / Astral pipes or Equivalent) |
| 34 | 75mm dia PVC soil waste pipe |
| 35 | 110mm dia PVC soil waste pipe |
| 36 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). (Brand :Finolex Industries / Ashirvad pipes / Astral pipes or Equivalent) |
| 37 | 75mm dia PVC Elbow |
| 38 | 75mm dia PVC Tee |
| 39 | 75mm dia PVC door Elbow |
| 40 | 110mm dia PVC door Elbow |
| 41 | 110mm dia PVC Elbow |
| 42 | Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) (Brand: Asian paints / Nippon Paints or Equivalent) |
| 43 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) (Brand: Asian paints / Nippon Paints or Equivalent) |
| 44 | Collecting the scattered debries from the campus and conveying away the same to ouside by tipper machinary to a lead of 3km (Entirely within city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. |
| 45 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender