Tender For Renovation And Improvement Of Chhatrapati Shivaji Maharaj Hospital In Thane Municipal Corporation Limit (Phase Ii).
Tender Value
55.31 Crore
Estimated cost
Bid Submission
22 Oct 2026
2 days left
EMD
27.65 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Improvement Of Chhatrapati Shivaji Maharaj Hospital In Thane Municipal Corporation Limit (Phase Ii).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 2 | Providing and fixing Jute Kantan (Tarat) screen to the scaffold-ing for external guniting as directed including removing the same after the work is over etc. complete. |
| 3 | Chipping /removing loose concrete upto reinforcement bars, without damaging the reinforcement, removing all the loose materials and to make all the exposed surfaces free from oil, dust and all impurities etc. complete, including necessary scaffolding, staging and dismantling thereof. |
| 4 | Providing and fixing 6 mm thick commercial plywood with jungle wood frame work of 50 x 35 mm size at 60 cm on both ways for closing the window portion/openings for protection from falling debris, dust etc. including cutting, fixing with nails and removing after the same after completion of the work. (To be used after approval of Superintending Engineer) |
| 5 | \\"Disposal & Transportation of Malba / Building Rubbish / Dismantled Material / Debris Providing all labour, tools, tackles, equipment and transport vehicles for collection, segregation, loading, carriage and disposal of malba, building rubbish, dismantled materials and construction debris generated during demolition/construction activities, including transportation and disposal outside the site boundary/campus limits; the rate shall include all leads and lifts, manual/mechanical loading and unloading, royalties, tipping fees, taxes, statutory permissions, prevention of spillage during transit, cleaning of roads if required, and compliance with all safety and environmental regulations, complete in all respects, and nothing extra shall be payable on any account.\\" |
| 6 | Demolishing R.C.C. slab, R.C.C. wall of any thickness, R.C.C. beams, joists, R.C.C. columns, piles, pile caps etc., in any thickness and size manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 7 | Removing and refixing existing door or window with frames and shutters, making good the damaged brick work and applying 3 coats of Syn. Ena. Paint |
| 8 | Removing existing R.C.C. jallies of any design & deposit to ward store complete. |
| 9 | Providing precast cement concrete Jali of Nominal Mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.25 mm thick |
| 10 | Providing precast cement concrete Jali of Nominal Mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.40 mm thick |
| 11 | Application of Rust Converter: Providing & applying One coat of Alkaline Rust converting primer conforming to ASTM-B-117, to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 hours. |
| 12 | Carry out application of \\"Bi-polar migratory corrosion inhibitor\\" on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100mm, through pores of concrete,inhibiting the corrosion etc complete. |
| 13 | Providing and applying IP Net RB rust passivator/anti-corrosive protective coating on exposed reinforcement steel after thorough cleaning of reinforcement by wire brushing/mechanical brushing to remove rust, scales, dust and loose particles, including application of the coating in the specified number of coats as per the manufacturer's specifications, complete with all materials, labour, tools, tackles and incidental charges, as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 14 | Providing and applying IP Net RB rust passivator/anti-corrosive protective coating on exposed reinforcement steel after thorough cleaning of reinforcement by wire brushing/mechanical brushing to remove rust, scales, dust and loose particles, including application of the coating in the specified number of coats as per the manufacturer's specifications, complete with all materials, labour, tools, tackles and incidental charges, as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender