Tender For Improvement/Upgradation To Certain Smqs Of Bhind Vihar Area At Af Stn Gwalior
Tender Value
42.75 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
20 days left
EMD
85600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement/Upgradation To Certain Smqs Of Bhind Vihar Area At Af Stn Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully point wiring from existing place i.e. light, fan socket or power points complete with all fittings such as switches, sockets, ceiling rose pendants, holders etc and making good to disturbed surface of wall, floor etc to match with existing surface complete all as specified and directed. |
| 2 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- (Note: For Light points one circuit maximum 08 points.) |
| 3 | One light, ceiling fan, Exhaust fan or Bell point controlled by one switch. |
| 4 | One light point controlled by two- two way switches. |
| 5 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 2.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 2.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following :- [Note: (a) For same board 6 Amps socket not more than 2 x 6 Amp sockets in one circuit for light point.(b)For Socket outlet Ind 6 Amps ( One circuit with maximum 4 points).(c) For Socket outlet 16 Amps ( One circuit of one point only)] |
| 6 | One 5 Amps socket outlet on same board. |
| 7 | One 5 Amps socket outlet on independent board. |
| 8 | One 15 Amps socket outlet on independent board. |
| 9 | M&L for Modular switch flush type single pole one way 6 Amps 240 volts, 1 Module complete all as specified and directed. |
| 10 | M&L for Modular switch flush type single pole Two way 6 Amps 240 volts, 1 Module complete all as specified and directed. |
| 11 | M&L for Modular socket 6 /16 Amps-2/3 pin combined two module complete all as specified and directed. |
| 12 | M&L for Modular socket 6 Amps-2/3 pin combined two module complete all as specified and directed. |
| 13 | M&L for Modular switch 1 way 16 Amps 1 module complete all as specified and directed. |
| 14 | M&L for ceiling rose surface Bakelite two to three terminal 65x50 mm complete all as specified and directed. |
| 15 | M&L for angular type lamp holder insulated body with back plate for batten fitting complete omplete all as specified and directed. |
| 16 | M&L for bell push flush type 5 Amps single pole 230 Volt white ivory finish complete all as specified and directed. |
| 17 | Supply and fixing Bell Ding Dong, AC 230 V single pole complete all as specified and directed. |
| 18 | Supply and Fixing Modular fan step regulator single phase 230 volt, 120 watt -2 Module complete all as specified and directed. |
| 19 | Supply and fixing in replacement wall/surface mounted type LED light fitting complete with LED lamp of 1x 20/22 watt (4 ft), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable suitable size etc complete all as specified and directed. |
| 20 | Supply and fixing in replacement LED Light fitting mirror type with high out put diffuser 2 feet, 10 Watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 21 | Supply and fixing in replcement LED Light fitting 1x9/10 Watt bulkhead luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 22 | Dismaintling & Taking out MCB DBs and MCBs any size, any type and capacity complete all as specified and directed. |
| 23 | Supply and fixing of sheet metal enclosure for DBs 12 way double door 230 volt single pole and neutral supply complete fixed properly on MS strips and to connect their incoming/outgoing electric connections by means of suitable size of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB's of cables/wires complete all as specified and directed. |
| 24 | Supply & Fixing MCB SP, 6 to 32 Amps ('B' series) having current rating 10 KA complete all as specified and directed. |
| 25 | Supply & fixing MCB SPN, 32 Amps ('C' series) having current rating 10 KA complete all as specified and directed. |
| 26 | M&L for sub main wiring in repair using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor FR of size 6 Sqmm as earth continuity conductor complete all as specified and directed.Note: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. Make of Cable/wire:- Havells/Finolex/PolycabMake of PVC Conduit:- Finolex/Kilinga/Polycab |
| 27 | M&L for sub main wiring in repair using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor FR of size 4 Sqmm as earth continuity conductor all as specified and directed.Note: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. Make of Cable/wire:- : Havells/Finolex/PolycabMake of PVC Conduit:-Finolex/Kilinga/Polycab |
| 28 | Supply and fixing Street light fittings LED 35W 230 volt AC outdorr type with high pressuredie cast aluminium hosing and heat resistance complete with driver ,lamp bracket with impact IP66 luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ), clamp, nut-bolt and washers complete all as specified and directed. |
| 29 | Supply and fixing exhaust fan steel body AC single phase ,230 volt of size 300 mm sweep with, blades and frame and louvers complete all as specified and directed. |
| 30 | Taking down Electric Meter any make and any size and deposit in safe custody with MES store yard and re-fixing after completion of work complete all as specified and directed. |
| 31 | Supplying and fixing new industrial type socket, 2 pole + earth 20 Amps, with and including plug top and MCB, 20 Amps, ‘C’ series, single pole in sheet metal enclosure complete all as specified and directed. |
| 32 | Supply & Fixing BLDC ceilling fans copper motor complete with blades,without downrod, electronic regulator and accessories ,230 V ,1200mm Sweep Min air delivery 210 CEM with service value 6.00 BEE .Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed agaist BER replacement including taking down old unserviceable fans and deposited to E/M store yard complete all as specified and directed. |
| 33 | Taking down carefully from existing place for Geyser of capacity 25 Ltrs by disconnecting elect/water supply connection and refixing the same after civil work incl all elect /water connection connecting with suitable wire complete all as specified and directed. |
| 34 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 35 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 37 | Demolition of PCC in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed. |
| 38 | M&L for PCC type B-0 1:2:4 (using 12.5mm aggregate ) as in floor to reive the screed and other work complete all as specified and directed. |
| 39 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection finished even and smooth with using extra cement complete all as specified and directed. |
| 40 | M&L glazed colour ceramic coloured tiles 450 x 300 x 7mm thick in vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including fixing with neat cement based over 10mm thick cement motar 1:4 complete all as specified and directed. |
| 41 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.05 sqm but not exc. 0.10 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick CM 1:6 complete all as specified and directed. |
| 42 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.17 sqm but not exc. 0.37 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 43 | M&L coloured ceramic tiles joint free non skid coloured ceramic tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.17 sqm but not exc. 0.37 sqm, in skirting etc ncluding fixing with neat cement over dado or bedding layer of mortar 10 mm thick cement motar 1:4 complete all as specified and directed. |
| 44 | M&L Granite (of any type) work,18 to 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cm 1:4 and including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges including screed bed 20mm thick in cm 1:6 complete all as specified and directed. |
| 45 | M&L for Baroda Green Marble slab 16 to 20mm thick for window cill including 20mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 46 | M&L for machine cut Kota stone slab 22 to 24mm thick Mirror polished in treads, landings of stair case over cement screed bed laid and jointed wilth grey cement slurry mixed with pigment to match the shade of the slab lincluding & grinding polishing over and including screedbed 20mm thick in cm 1:6 complete all as specified and directed. |
| 47 | M&L for machine cut Kota stone slab as in skirting, risers 22 to 24 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in cm1:3 complete all as specified and directed. |
| 48 | Taking down cement plaster including on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc.complete all as specified and directed. |
| 49 | M&L for 10mm thick ready mix plaster on brick wall, concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for 15mm thick ready mix plaster on brick wall, concrete surface with mixing of WPC @ 100 Mil per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be paid separately . |
| 51 | M&L for 5mm thick ready mix plaster on ceiling /facia/roof projection and finishing even and smooth without using extra cement complete all as specified and directed. |
| 52 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 53 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5sqm but n.exc 4.0 Sqm each complete all as specified and directed. |
| 54 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed. |
| 55 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 56 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 57 | S&F 30 mm thick flush door both side prelaminated , solid core construction with block board core and plywood face panels with lipping / frame to match complete all as specified and directed. |
| 58 | S&F 35 mm thick 2nd class hard wood glazed skeleton shutters factory made open rebated and prepared to recieve glass, guazed etc ( with sash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1, Section 8, clause 8.24 (a) and fitted to chowkhat complete all as specified and directed. |
| 59 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. |
| 60 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately |
| 61 | S&F stainless steel hinges medium weight butt hinges of 125 mm size complete all as specified and directed. |
| 62 | S&F stainless steel hinges medium weight butt hinges of 100 mm size complete all as specified and directed. |
| 63 | S&F stainless steel handle cast type, anodised 150 mm size complete all as specified and directed. |
| 64 | S&F stainless steel handle cast type, anodised 125 mm size complete all as specified and directed. |
| 65 | S&F stainless steel, barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed. |
| 66 | S&F stainless steel, barrel tower bolts of extruded section and fixed 125mm long complete all as specified and directed. |
| 67 | S&F 250mm long stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 68 | S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 69 | S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed. |
| 70 | S&F powder coated (of approved tint) aluminum frame & openable shutter for door, window, ventilators including joining cleat glazing clip, snap beading, rubber packing, all building hardware (Hinges, Tower Bolt, Handels) & screw etc for fixing complete all as specified & directed. Note: (i) wire mesh and sheet glass shall be measured and paid separately under respective items.(ii) Weight of only aluminium section used for fabrication of door/window shall be measured for payment. |
| 71 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples.complete all as specified and directed. |
| 72 | S&F 4mm thick Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed. |
| 73 | S&F 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 74 | S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green |
| 75 | S&F in repair18mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make cup board sides top and bottom, shelves inside the cup board and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.Make: Rajshri celuka or equivalent as approved by GE. |
| 76 | S&F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 77 | S&F 125 mm size SS, Haps and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 78 | M&L for half brick work using old size sub class 'B' brick, straight or curved on plan any radius radius, built in CM (1:4) complete all as specified and directed. |
| 79 | S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia and fixed to stainless steel bracket for hanging curtain complete all as specified and directed. |
| 80 | S&F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed. |
| 81 | S&F Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as secified and directed. |
| 82 | S&F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ S/S screw complete all as specified and directed. |
| 83 | S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed . |
| 84 | S&F 600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 85 | S&F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 86 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 87 | M&L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 88 | M&L PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed. |
| 89 | S&F in repair PVC white low level flushing cistern 10 Ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bend etc. complete all as specified and directed |
| 90 | S&F in repair Vitreous China wash basin, flat back, size 450x300mm white, including waste pipe excluding taps, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 91 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed. |
| 92 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and directed. |
| 93 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified and directed. |
| 94 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 95 | S&F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 96 | S&F in repairs 15mm bore CP wall mixture fancy type , complete all as specified and directed. |
| 97 | S&F in repairs 15mm bore Swan nack mixture for kitchen complete all as specified and directed. |
| 98 | S&F in repairs Two way tap, cast copper alloy with capstan head, CP fancy type with long body shank,15mm bore, complete all as specified and directed. |
| 99 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 100 | Dismantling water tank exc 250 but n exc 500 ltr.complete all as specified and directed. |
| 101 | S&F rotational moulded polythene water storage tank of capacity 500 Ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed. |
| 102 | S&F CPVC Gate valve 25 mm internal dia complete all as specified and as directed. |
| 103 | S&F Tank union 25mm internal dia complete all as specified and as directed. |
| 104 | S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified. |
| 105 | S&F 25 mm internal bore nipple suitable for HDPE water tank (Min wt 45 gms) complete all as specified and directed. |
| 106 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified and directed. |
| 107 | S&F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified and directed. |
| 108 | S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified and directed. |
| 109 | S&F of 20 mm dia CPVC brass elbow complete all as specified and directed. |
| 110 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and directed. |
| 111 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and directed. |
| 112 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 113 | Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed. |
| 114 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 115 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 116 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 117 | S&F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches complete all as specified and directed. |
| 118 | S&F PVC SWR 110 mm bends any radius complete all as specified and directed. |
| 119 | S&F 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 120 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 121 | S&F 110 mm PVC (SWR) WC Connector bent type sanitary connection socket to fit WC outlet complete all as specified and directed. |
| 122 | S&F 110 mm PVC (SWR) P Trap (110/110mm bore)complete all as specified and directed. |
| 123 | S&F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complete all as specified and directed. |
| 124 | S&F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complete all as specified and directed. |
| 125 | M&L for writing of letters for building numbers complete all as specified and directed. |
| 126 | Mild steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 127 | M&L reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/Rcc railing repairs as in similar work complete all as specified and directed. |
| 128 | M&L formwork to chullah hoods, chajjas, trough and similar itmes including edges complete all as specified and directed. |
| 129 | Material and Labour for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290 & grade E-165 etc complete all as specified and directed. |
| 130 | M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 131 | M&L for preparation of old steel Surfaces of any description, over 10cm in width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 132 | M&L for preparation of new wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 133 | M&L for preparing new plaster surfaces of Walls and applying two coats of Oil Emulsion over a coat of primer complete all as specified and directed. |
| 134 | M&L for complete removing existing treatment on wall surface and applying two coats of oil Emulsion over one coat of primer complete all as specified and directed. |
| 135 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed. |
| 136 | M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed. |
| 137 | M&L for preparing new plaster surfaces of on ceilings and applying two coats of white wash over coat of primer complete all as specified and directed. |
| 138 | M&L for complete removal of existing treatment on ceiling surface and applying two coats of white wash complete all as specified and directed. |
| 139 | Supply and fixing of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed. |
| 140 | M&L for post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. |
| 141 | S&F in repair 1mm thick stainless steel plate rack of over all size 600x900x300mm of standard pattern complete all as specified and directed. |
| 142 | S&F in reapir sink with drainage board made SS 1mm thick kitchen or laboratory with plug washer and waste pipe including bedding in CM to drarf wall or incl fixing cantilever bracket and connecting to pipe ( overall size 915x460mm bowel size 410mmx 330mmx160mm complete all specified and as directed. |
| 143 | M&L PCC (1:5:10) type E-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 144 | M&L for demolition of existing traps and removing the material and cleaning with the wire brush to dry and including applications of one coat of Sika latex SBR or Nito bond SBR (or equivalent from approved list of makes and as approved by GE) and cement in ratio 1:1 @400 gm/sqm. After drying apply two coats of SIKA top seal 107 or Brush bond @ 1.5 Kg/sqm (or equivalent from approved list of makes and as approved by GE) min 4 hrs gap is required between application of each coat and including 15mm thick rendering in CM 1:4, finished even and smooth without using extra cement as in sunken portion complete all as specified and directed. |
| 145 | M&L for hacking and racking out the wall joints with wire brush to dry and apply one coat of Sika latex SBR or Nito bond SBR (or equivalent from approved list of makes and as approved by GE) and cement in ratio 1:1 @400 gm/sqm. After drying apply two coats of SIKA top seal 107 or Brush bond @ 1.5 Kg/sqm (or equivalent from approved list of makes and as approved by GE) min 4 hrs gap is required between application of each coat and including 15mm thick rendering in CM 1:4, finished even and smooth without using extra cement as in sunken portion complete all as specified and directed. |
| 146 | Demolition of concrete any description and in any position not otherwise specifically provided including remove all dabris out site MOD land complete all as specified and directed. |
| 147 | M&L for screed bed 10mm thick cm 1:4 on fair face of concrete surface with mixing WPC @ 200 Mil per bag of cement finished even and smooth without using extra cement .WPC will be paid separately complete all as specified and directed. |
| 148 | M&L for single component weather resistant, liquid applied acrylic polymer based elastomric water proof coating using elastomeric water proofing membrance for all types of exposed roof slabs (new or old), terraces (slopes and flat )water proof coating shall be UV Rays resistant, solar reflective, etc all as specified in below mentiond specification :- 47.1 Aceylic polymer dispersion single component liquid applied system Sika cool coat not less than 650 micron (1.2mm system built up), contains cross-linking polymers, special glass micro fibres, pigments and advanced antifungal additive that provides long lasting tough water proofing membrane conforms to IS101, IS 2645, EN1542,ASTM D 5589, ASTM C-1202-08, ASTM D 4587, ASTM C 836, ASTM E1980, EN-673, EN-410.It should have solid content -66%(br weight), VOC<10 gm/l complies to Green building standards and should meet the properties of adhesion strength on cement after 14 days curing>1.5 N/mm2 as per EN1542, Tensile strength 1.5 Mpa as per ASTM D 412, Crack bridging properties 3.2mm as per ASTM C-836, Water absorption (% by mass)<10% as per ASTM D570, Solar reflectance index not less than 100(+-5%)(low wind to high wind condition),Elongation at break (200%) as per ASTM D412, Algae & fungel resistance as per ASTM D-5590, Shore A Hardness 45 after 1 month and shuld pass Accelerated weathering , 500 hours A Hardness 45 after 1 month and should pass accelerated weathering, 500 hours without any cracking, blistering &100% gloss retention as per ASTM D 4587. 47.2 Fully reinforced with glass fibre reinforced Sika Fab (R) 13. The roofing system should be compatible with bitumen System.47.3 Side termination bar of 2mm thick aluminium valley strip with one side bending for membrane termination to be used with SBF fasteners. 47.4 Providing and applying primer over the prepared surface with Sika cool coat Primer @Coverage 0.1-0.12 kg/Sqm. First coat: Sika cool coat consumption @ 0.5 kg/sqm.Reinforcement:Sika fab1. Second coat:Sika cool coat consumption @0.5 kg/sqm third coat: Sika cool coat, consuption @ 0.5kg/sqm and top coat:Sika cool coat primer, Cunsumption @ 0.05-0.08 kg/sqm all as per specification & direction of Engineer-in-charge. |
| 149 | M&L for 1 mm thick cementitious wall care putty on new/old plaster for internal & external wall surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender