Tender For Special Repair And Revenue Works Under Age B&R-I And Age Em-Iv Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Sr(B)- 29 Of 2026-27 And Rev-03 Of 2026-27)
Tender Value
48.09 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
96180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Revenue Works Under Age B&R-I And Age Em-Iv Of Ge(S) Bathinda At Bathinda Mil Stn (Job No. Sr(B)- 29 Of 2026-27 And Rev-03 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed |
| 2 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm & n exc 4.00 Sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made, |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made, |
| 5 | S & F Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant nd ixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) . Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked). |
| 6 | All as per item No 5 above but wire Mess shutter without frame complete all as per specified. |
| 7 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window /ventilator made of extruded profiles with wall thickness of 2.3mm( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glassand Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 8 | S&F for galvanised MS wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified.. |
| 9 | Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified. |
| 10 | Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises all as directed. |
| 12 | M&L for PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in floor surface finished fair 30 mm thick below tiles complete all as specified and directed. . |
| 13 | M & L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of grani tecomplete all as specified and directed. |
| 14 | M&L for joint free anti- skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 15 mm thick adhesive and spacer complete. |
| 15 | Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10 mm thick adhesive and spacer complete. |
| 16 | S & F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) incl plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 17 | Supply and fixing in repairs 10 litres capacity,Concealed PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed. |
| 18 | S&F 'in repair' vitreous china wash basin, white, Oval type, size 450 mm x 300 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed. |
| 19 | Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified |
| 20 | Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified |
| 21 | Supplying and laying of CPVC pipes of 16 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type ,complete all as specified and directed. |
| 22 | Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type ,complete all as specified and directe |
| 23 | S & F in repair angular stop valves, cast copper alloy, but fancy type,chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 24 | Supply and fixing in repair bib taps cost copper alloy with crutch or butterfly handle , screwed down , chromium plated screwed for iron pipe or brass ferrul for 15MM bore dia pipe complete all as specified and director. |
| 25 | Supply and fixing in repair 15mm bore fancy type chromium plated stop wall cast copper alloy, with long shank hand cup in (concealed type ) with crutch over butterfly handle, screwed down, screwed for iron pipe or for brass ferrul complete all specified and directed. |
| 26 | S&F in repair Brass chromium plated shower rose 70 mm dia with arm and with or without swivel joints to steel pipe or union complete all as specified and directed. |
| 27 | S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed. |
| 28 | S & F in repair PVC connection 15 mm size with brass nuts of length 450 mm of approved quality complete all as specified and directed. |
| 29 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 30 | S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 31 | S & F in repair 125 mm dia CP Grating, fixed on floor/nahani trap complete all as specified and as directed. |
| 32 | S&F in repair bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 33 | S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 34 | S&F in repairs 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 35 | Supply and fixing in repair three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 36 | Supply and fixing in repair three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 37 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed. |
| 38 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 39 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 40 | Supply and fixing 110 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed to walls with MS clamps, including Taking down old AC eaves gutters and rainwater pipes (anysize and pettern), including all fittings, compete all as specified and as directed. |
| 41 | S&F 110 mm bore of pipe PVC (SWR) pipes type - B single socket in any length with rubber ring joint laid in trenches or in floors as in waste or vent pipe, including taking down old CI/PVC pipe complete all as specified and directed. |
| 42 | S&F 110 mm bore of PVC (SWR) bends and tee with access, type - B of any radius / shoe fixed to PVC pipes complete all as specified and directed. |
| 43 | S&F 110 mm bore of PVC (SWR)PVC (SWR) junction double,(double T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 44 | S&F 110 mm bore of PVC (SWR) junction single,(Single T) equal or unequal to PVC pipes complete all as specified and directed. |
| 45 | S&F 75 mm bore of pipe PVC (SWR) pipes type - B single socket in any length with rubber ring joint fixed to walls with MS clamps of F1 25x2mm complete all as specified and directed. |
| 46 | S&F 75 mm bore of PVC (SWR) bends & tee with access type - B of any radius / shoe fixed to PVC pipes complete all as specified and directed. |
| 47 | S&F 75 mm bore of PVC (SWR) junction double,(double T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 48 | S&F 110 mm bore of PVC (SWR) junction single,(Single T) equal or unequal to PVC pipes complete all as specified and directed. |
| 49 | Supply and fixing in repair PVC SWR floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed. |
| 50 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed. |
| 51 | Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 52 | M & L rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound all as specified and directred. |
| 53 | M&L for applying acrylic thick wall care putty on external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 54 | Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 55 | Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 56 | Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed. |
| 57 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 58 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge.(b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (b) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces Note : HS Power Plasticizer (Consumption :0.10 kg per Bag of Cement ) |
| 59 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curve on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and as directed. |
| 60 | Surface dressing not exceeding 15 cm deep complete all as specified and as directed |
| 61 | Rough excavation not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed |
| 62 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed |
| 63 | Material and labour for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation fiiling & mass concrete complete all as specified and directed |
| 64 | M&L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed . |
| 65 | M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor, complete all as specified and directed. |
| 66 | M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 but except bricks complete all as specified and directed. |
| 67 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 68 | S&F for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Map as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 69 | Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 70 | M& L Steel work in tubular post 10mm Dia including special shaped washer etc complete using ERW or including butt welded tubes conforming to I.S-4923-1979 grade St -2240 including rolled mild steel as in joist channel ,angle,or tee sections fixed independently , without connecting plates , etc (cut to ordinary legth ie within 20mm of tile length indicated of gde Fe 410 -S ,complete all as specified amd directed |
| 71 | S & F machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed. |
| 72 | M&L for 25mm thick sand filling under interlocking tiles including watering and consolidating complete all as specified and directed. |
| 73 | M & L for preparing steel surface over 10cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 74 | Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bell pushes, ceiling roses, pendants, regulators, sockets, light fitting, call bells etc removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing color complete all as specified and directed. |
| 75 | Material and labour for one light / fan point controlled by one, one way modular switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia in medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall complete and including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator and brass screws, cup washers etc complete, making good the distributed surfaces completely matched and finished with existing surfaces including painting of walls etc complete all as specified and directed. |
| 76 | All as per srl item No. 75 (here-in-before) but One 3 pin socket outlet 6 Amp on same board point, complete all as specified and directed |
| 77 | All as per srl item No. 75 (here-in-before) but One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed |
| 78 | All as per srl item No. 75 (here-in-before) but for 15/16 Amp socket out let/power point by using 4.0 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 4.0 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed |
| 79 | S & F Modular switch 1 way 6A/10A 1 module single pole complete all as specified and directed. |
| 80 | S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed. |
| 81 | S & F Modular Socket oultet 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed. |
| 82 | S & F Modular Socket outlet 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified and directed. |
| 83 | S & F ceiling rose surface bake lite with 3 terminals complete all as specified and directed. |
| 84 | S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed. |
| 85 | S&F of 9 watt LED bulb suitable for B-22 type holder complete all as specified and directed. |
| 86 | Supply and fixing of SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 87 | Taking down old complete and Supply and fixing of Inverter LED tube light fittings 1200 mm, 20 W ,6500K higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing ,enviromental friendly, energy efficient ready to use pack and comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable complete all as specified and directed. |
| 88 | Supply and fixing in replacement of LED Tube light Fitting Mirror type with high output diffuser 2 feet 10 Watt . 230 Volts , decorative type envoirmental friendly, energy efficient ready to use pack and comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable complete all as specified and directed. |
| 89 | Supply and fixing in replacement of LED Building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed |
| 90 | Taking down old complete and Material and labour sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the rate complete all as specified and directed.Note:- (i) 2 run of 6.0 Sqmm main cable, one run of 6.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length.(ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth. |
| 91 | Taking down old complete and supply and fixing of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 92 | Supply and fixing of SP MCB 6-32 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 93 | Supply and fixing of SPN MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed. |
| 94 | Supply, installation, testing and commissioning of Electric Water Heater (Geyser) capacity of 25 Ltrs, heating element upto 2 KW, 230 volt, BEE 5 star rated storage type steel/PVC body with stainless steel with a glass linked (Vitreous emamel) inner tank comprising with heating element, safety value, thermostate and automatic thermal cutoff, NRV, require all accessories complete and including suitable 04 Nos rawl plug alongwith Nuts & Bolts for mounting on wall and making functioning complete all as specified and as directed. |
| 95 | S & F of Heavy duty steel body Exhaust Fan of 300mm sweep, with blade 240 volt, energy efficient complete with louvers and shutter and mounted on wall with suitable opening arrangement in wall and connection up including 3 crore PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan copmplete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in cement mortar white washing to match with existing colour complete all as specified and as directed |
| 96 | Taking down old complete and M&L labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 Mtr length shall be deemed to be included in the rate quoted for this item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender