Tender For Provision Of Entry/Exit Gate And Improvement To Other Gates Of Pocket ‘E & Provision Of Parking Shed And Certain Allied Works At 10Lu, Hq Sac( U), Under Ge (Af) Trivandrum
Tender Value
48.37 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
4 days left
EMD
96740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Entry/Exit Gate And Improvement To Other Gates Of Pocket ‘E & Provision Of Parking Shed And Certain Allied Works At 10Lu, Hq Sac( U), Under Ge (Af) Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | Provn of entry/exit gate and improvement to other gates including allied works at HQ SAC (U). |
| 2 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc n exc 10 sqm on plan and getting out in hard/dense soil ,complete all as specified and directed. |
| 3 | All as per item above but exc 1.5m in depth, complete all as specified and directed. |
| 4 | M&L for returning, filling including spreading , levelling watering and well ramming in layers nex 25cm in hard and dense soil, complete all as specified and directed. |
| 5 | Removing excavated material exc 250m and n exc 500m and depositing where directed, complete all as specified and directed. |
| 6 | M&L for Hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 75 mm (Broken stone or boulders), complete all as specified and directed. |
| 7 | M&L for PCC (1:4:8 ) Type D2 using 40mm graded stone aggregate as in sub-base under floor and mass concrete, complete all as specified and directed . |
| 8 | S&F mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips complete all as specified and directed. |
| 9 | M&L for Mild steel bars TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 10 | M&L, Formwork to Rough finished surfaces of concrete , sides of concrete foundations, footings,bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams ; and similar work with rough finished flat surfaces of concrete, complete all as specified and directed. |
| 11 | M&L, for formwork to Rough finished surfaces of concrete , sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces of concrete, ,complete all as specified and directed. |
| 12 | M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels over 1.5m span etc with rough finished flat surfaces of concrete, complete all as specified and directed |
| 13 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 14 | M&L, for Reinforced cement concrete (design mix) RCC M-30 (using 20 mm graded stone aggregate ) in foundation footing , plinth beams, base of column , under reamed piles and mass concrete, complete all as specified and directed. |
| 15 | M&L Reinforced cement concrete (design mix) M-30 (using 20 mm graded stone aggregate) Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 16 | M&L for RCC M-30 design mix (20mm graded aggregate) in beams, cantilevers, bressumers, lintels over 1.5m span etc complete all as specified and directed. |
| 17 | M&L for RCC M-30 design mix (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 19 | Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. |
| 20 | Dismantling of wall and ceiling boards (ACP Sheet, fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed |
| 21 | M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed. |
| 22 | M&L for Roof tiles Mangalore pattern inter locking at side joints, laid dry, complete all as specified and directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. |
| 23 | M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6,complete all as specified and directed. |
| 24 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 25 | M&L for Endura Tiles/stone (coloured/designer) heavy duty of size 400x400mm/600x600mm, 10-12mm thick, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed. |
| 26 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 27 | M&L for chequered cement concrete tiles 25cmx 25cm x 22mm thick, machine pressed; with grey cement & pigments, set jointed and pointed in neat cement slurry in floors, and cut and polished , complete all as specified and directed. |
| 28 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receiving of floor tiles complete all as specified and directed. |
| 29 | M& for Plain cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as in path/hard standing, surface channel and drains, ,complete all as specified and directed. |
| 30 | M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 31 | M&L for wall cladding tiles in vertical surface exc .08 sqm but n.exc 0.80 sqm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. Note : Tile shade and design as approved by Engr-in-Charge/GE. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. |
| 32 | M&L for laterite tile size 300x150x19mm thick as in wall, set and jointed with adhesive/chemical and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed. Note : Tile shade and design as approved by Engr-in-Charge/GE. |
| 33 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 34 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles/granite complete all as specified and directed. |
| 35 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 36 | M&L for design supply and fixing Aluminium Composite Panel (ACP Sheet) of approved colour exterior grade on exterior wall, columns, beams, slab projections, soffit & coping at all heights and elevations including necessary aluminium framework. The aluminium composite panel should be 4mm tk consist of 3mm tk thermoplastic core of anti toxidant LDPE sandwiched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. Note : The ACP sheet should be fire retardant with necessary aluminium sub frames, cleats, and shall be fixed to the masonry/RCC structures with necessary clamps, Galvanised MS brackets and anchor fasteners. Any other accessories such as fastening straps, nuts, bolts, rivets, washers etc should be of IS grade. All joints of ACP must be sealed with approved weather sealant of approved colour. The colour and texture will be approved by Engr-in-Charge/GE,complete all as specified and directed. |
| 37 | S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. (ii) The contractor shall follow schematic drg as provided in PS or all as specified and directed by Engr-in-Charge/GE. |
| 38 | M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and priming the surface with epoxy primer and applying two coats of epoxy paint complete all as specified and directed. |
| 39 | S&F 600mm long MS steel kuthirakal rafter fixed to the steel frame complete all as specified and as directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. (ii) The contractor shall follow schematic drg as provided in PS or all as specified and directed . |
| 40 | S&F 450mm long MS steel kuthirakal rafter fixed to the steel frame complete all as specified and as directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. (ii) The contractor shall follow schematic drg as provided in PS or all as specified and directed . |
| 41 | S&F MS mughappu fixed to MS frame complete all as specified and as directed. Note:- The rate shall be inclusive scaffolding & complete fitting at a height upto 12.00 mtr. (ii) The contractor shall follow schematic drg as provided in PS or all as specified and directed . |
| 42 | M&L for rubbing, scrapping down of old plastered surface of wall and applying two coats of weather coat paint(Anti fungal paint) over a coat of primer over (external) acrylic putty complete all as specified and directed. |
| 43 | M&L for rubbing, scrapping down of old plastered surface of wall and applying two coats of acrylic emulsion paint over a coat of primer over 3mm wall care putty complete all as specified and directed. |
| 44 | M&L for Providing and applying 3mm wall care putty on wall surface and achieve the surface even and smooth complete all as specified and as directed. |
| 45 | Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 46 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 47 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM 1:4, complete all as specified and directed. |
| 48 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 49 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 50 | M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting's, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc, complete all as specified and directed. |
| 51 | M&L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in coping complete all as specified and directed. |
| 52 | M&L for rubbing, scrapping down of old plastered surface of wall and applying two coats of weather coat paint(Anti fungal paint) over a coat of primer complete all as specified and directed. |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 54 | S&F rolled mild steel work as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 55 | S&F of CNC cutting of Mild Steel (MS) sheet of thickness 2mm and it includes raw material, machine cutting charges, debarring, and delivery complete all as specified and directed. |
| 56 | Dismantling plain or corrugated steel sheeting, any gauge ,thickness including Nainital or similar pattern roof covering including necessary scaffolding, any type, any location/height complete all as specified and directed . |
| 57 | S&F Mangalore Tile Pattern Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with 'J' hooks or cranked hook bolts or self tapping screws complete all as specified and directed . |
| 58 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chromate primer paint including preparation of surface, complete all as specified and directed. |
| 59 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and directed. |
| 60 | Provision of parking shed and certain allied works at 10LU, HQ SAC( U), Trivandrum |
| 61 | M&L for Surface dressing n exc 15 cm deep in soft/ loose soil ,complete all as specified and directed. |
| 62 | M&L for Excavating in post holes in soft/looses soil (or similar holes) each n exc 0.5 cu. m, getting out and deposite at directed place, complete all as specified and as directed . |
| 63 | M&L for PCC 1:3:6 type C2, using 40mm graded stone aggregate as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 64 | M&L, 150mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base under floor, hard standing and maintain the camber. Complete all as specified and directed. |
| 65 | M&L for sand cushioning under paver block including watering and consolidation. Complete all as specified and directed. |
| 66 | M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender