Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58053663

Tender For Repair/Maintenance To Leakage/Seepage, Flooring, Plinth Protection, Roof Treatment Etc For Outside Pocket Under Ge (Af) Adm Area At Af Station Gwalior

Issued by Statutory Bodies & Commissions/Committees · Gwalior, Madhya Pradesh
Tender Value
30 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maintenance To Leakage/Seepage, Flooring, Plinth Protection, Roof Treatment Etc For Outside Pocket Under Ge (Af) Adm Area At Af Station Gwalior

BOQ

Name of Work:- REPAIR/MAINTENANCE TO LEAKAGE/SEEPAGE, FLOORING, PLINTH PROTECTION, ROOF TREATMENT ETC FOR OUTSIDE POCKET UNDER GE (AF) ADM AREA AT AF STATION GWALIOR
Sl. No. Item Description
1S&F 25mm nominal bore, steel tubing galvanized medium grade including all fittings and jointing complete,fixed to walls/ceiling on surface/conceled ) or laid in floor and including taking down old unserviceable pipes complete all as specified and directed.
2Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair work and refixing the same after repair work is over complete all as specified and directed.
3Disconnecting existing tanks of capacity exc 500 litre but n. exc 1000 litre for repair work and refixing the same after repair work is over complete all as specified and directed.
4S&F in repairs 550 Litre capacity 5 layered PVC water storage tanks with dual foam layers, Advanced Anti-Microbial Layer, UV Protection Sun Shield Layer, Temperature Resistant Foam Layer, (cylindrical, vertical with closed top) including float valve, provision of inlet, outlet and washout pipe and including removing of exisiting water tank complete all as specified and directed.
5S&F in repairs 1000 Litre capacity 5 layered PVC water storage tanks with dual foam layers, Advanced Anti-Microbial Layer, UV Protection Sun Shield Layer, Temperature Resistant Foam Layer, (cylindrical, vertical with closed top) including float valve, provision of inlet, outlet and washout pipe and including removing of exisiting water tank complete all as specified and directed.
6Demolition of existing roof treatment (Brick/PCC tiles, Screed plaster, Tarfelt etc) up to 100mm thick of any description and in any position not otherwise specifically provided, other than ground floors and removing the demolished material out of MoD land complete all as specified and directed .
7M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in levelling course/concrete padding etc over roof including finishing the surface even & smooth without using extra cement complete all as specified and as directed.
8M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000 microns with Heat reflective system for all types of exposed roof slabs (New / Old) terraces (sloped and flat) over a coat of Primer of same product diluted with water in a 2:1 ratio, as a self priming coat at a rate of 8-10 sqm/ Ltr. complete all as specified and as per manufacturer directions. Make: Dr Fixit Roof Seal Select / Techno Commercial Equivalent.
9M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000microns with Heat reflective system for chajjas/Parapet walls (new and old) terraces (sloped and flat) complete all as specified and directed. Make:- Dr Fixit Roof seal select/ Techno Commercial Equivalent
10M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall filling holes on building (block of 4/6/8/12/18 qtrs) wall/roof/chajja/water tank staging area etc and making good with CM 1:4 complete all as specified & directed.
11Repair leakage of 15 mm bore Concealed Stop Cock by replacing of necessary brass Concelaled spindles as required complete all as specified and directed.
12M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, pavings, 75 mm thick, laid in alternate bays, cutting grooves and filling bitumen mastic mixed with sand and bitumen finished even and smooth without using extra cement complete all as specified and directed.
13Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material exc 1.5km but n.exc 5 km distance and depositing where as directed, complete all as specified and directed.
14Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) complete all as specified and directed.
15M&L Cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick finished even and rough to receive the top layer complete all as specified and directed.
16M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
17M&L Vitrified ceramic tiles 10mm thick light shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. fixed over and including 15mm thick screed bed in cement mortar 1:4 fixed over 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate including demolition of existing floor of any type/pattern complete all as specified.
18M&L Doublecharged Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc fixed over and including 15mm thick screed bed in cement mortar 1:4 fixed using spacers of 5-6mm and joints filled with epoxy over 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate including demolition of existing floor of any type/pattern complete all as specified and directed.
19M&L for Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm but as in floor including 10mm thick screed plaster in CM 1:4 , complete all as specified and as directed.
20All as per Item No 19 above but on vertical surfaces including 10mm thick screed plaster in CM 1:4 complete all as specified and as directed.
21M&L for Granite (of any type) work (table rubbed and polished) in cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite, 25 mm thick including rounding edges and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
22M&L for coloured glazed ceramic tiles in vertical surface 600 X 300 X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .
23S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.
24Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.
25S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified and directed.
26S&F in repairs vitreous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl connecting to trap making good to floor complete all as spd and directed.
27S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for /IWC suitable for 15mm bore pipe complete as directed.
28S&F in repairs CP Sink coupling 32x100mm, complete all as specified and directed.
29S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
30S&F in repair single lever Basin mixer without popup waste system with 450 mm long braided holes etc all as specified and directed.
31S&F in repair 15 mm bore CP wall mixer (2-in-1) with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed.
32S&F in repair stop valve cast copper alloy fency type with long shank and cup (concealed type) with crutch or butterfly handle screwed downboth ends for high pressure as per ISI suitable for 15mm dia iron pipe complete all as specified and as directed
33S & F in repair Long body Bib taps, 15 mm dia, cast copper alloy, quarter turn, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
34S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink, complete all as specified and directed.
35S&F in repairs brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.
36S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.
37S&F 20mm Tank Adaptor/Connector complete all as specified and directed.
38S&F 20mm Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed.
39S&F 20mm Female Brass Threaded Adaptor (FMTA/FMBTA) complete all as specified and directed.
40Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.
41S&F in petty repairs for flush cistern of Concealed/Wall mounted/Single Piece with necessary flush fittings Kit complete as required at site, complete all as specified and directed
42S&F in repairs Looking Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge.
43S&F in repairs stainless steel (SS-204) Plate/cutlery/Large Utensil/Cup &Saucer/Tali basket of size as per site requirement of approved sample complete all as specified and as directed.
44S&F in repairs sheet glass Shelf assembly 5.5mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed
45S&F in repairs corner galss shelf 8mm thick of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed
46S&F in repairs toilet paper holder as approved by GE complete all as specified and directed.
47M&L in repairs for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane, size quantity or description from wooden frame/Steel frame complete all as directed by Engineer-in-Charge
48S&F in reapirs Aluminium Powder coated Peg Set of 06 Nos (Pegs) of good quality complete all as specified and directed
49M&L in repairs for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane, size quantity or description from wooden frame/Steel frame complete all as directed by Engineer-in-Charge
50S&F in repairs kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed
51S&F in repair Chromium Plated Mild Steel Harrison Rail (curtain hanging rods 25 mm dia) including brackets, stops, rollers and necessary fixing arrangement and making up repair work and all fittings complete all as specified and directed.
52S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane in metal frames and hacking out old broken glass pane of any thickness and size complete all as specified and directed.
53S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.
54M&L Complete removal of existing treatment and applying TWO COAT of ACRYLIC EMULSION DISTEMPER over a coat of primer over one coat of wall care putty of 1mm thick complete all as specified and directed
55M&L preparation of old decorated walls by removing dust, dirt and loose scales and necessary repairs by applying Plaster of Paris (POP)/Putty and applying TWO COAT of ACRYLIC EMULSION DISTEMPER after complete all as specified and directed.. Note : - The paint/Primer shall be applied with Hand Roller only.
56M&L preparation of old decorated walls by removing dust, dirt and loose scales and necessary repairs by applying Plaster of Paris (POP)/Putty and applying ONE COAT of ACRYLIC EMULSION DISTEMPER after complete all as specified and directed.. Note : - The paint/Primer shall be applied with Hand Roller only.
57M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.
58Description all as per item No-60 here in before but one coat of synthetic enamel paint on steel surface.
59M&L Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.
60M&L Preparation of old decorated surfaces of Ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.
61Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.
62M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.
63M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement.
64M & L preparation of newly plastered surfaces of walls and applying one coat of primer and two coats of oil bound distemper, complete all as specified and directed.
65M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
66M&L for preparation of old surfaces (brick/ concrete, plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of synthetic enamel paint, complete, all as specified & as directed.
67M&L for preparation of old surfaces (brick/ concrete, plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of plastic emulsion paint, complete, all as specified & as directed.Note :- The paint should be of following Make : Asian Paints - Royale Shyne/ Berger Paints - Silk Emulsion/Nerolac - Beauty Gold
68S&F in repairs soft closing seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed.
69S&F in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.
70S&F in repairs Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58053663
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 05-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maintenance To Leakage/Seepage, Flooring, Plinth Protection, Roof Treatment Etc For Outside Pocket Under Ge (Af) Adm Area At Af Station Gwalior
Basic Detail
Tender No 8614/E8
Bidding Type Tender
Location
City Gwalior
State Madhya Pradesh
Key Dates
Publish Date 15 Oct 2026
Submission Date 05 Nov 2026
Open Date 12 Nov 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Available
Document List
78956bd0-cef0-42e5-bfed-7b76d171e1c1.html
BOQ_890504.xls
TENDER8614.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Nov 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
html

78956bd0-cef0-42e5-bfed-7b76d171e1c1.html

xls

BOQ_890504.xls

pdf

TENDER8614.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender