Tender For Providing/Renovation Of Public Health Services In 3 No. Main Bathrooms & 01 No. Servant Bathroom And 1 No. Kitchen At Official Residence Of Sh. Sujeet Kumar, System Analyst, Punjab Vidhan Sabha, I.E. Flat No. 3151-B, Sector-39D, Chandigarh
Tender Value
7.87 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
10 days left
EMD
15760
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing/Renovation Of Public Health Services In 3 No. Main Bathrooms & 01 No. Servant Bathroom And 1 No. Kitchen At Official Residence Of Sh. Sujeet Kumar, System Analyst, Punjab Vidhan Sabha, I.E. Flat No. 3151-B, Sector-39D, Chandigarh And All Other Works Contingent Thereto.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of 03 No. Bathrooms |
| 2 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (using mechanical mixer for mixing of material) |
| 3 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 4 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure |
| 7 | 12.5 mm thick cement plaster 1:6 (Kitchen-Bedroom partition 4.5\\" Wall) |
| 8 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 9 | 15mm i/d |
| 10 | 20mm i/d |
| 11 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 12 | 15mm i/d |
| 13 | 20mm i/d |
| 14 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 15 | 20mm i/d |
| 16 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 17 | Through wall 22.86 cm thick |
| 18 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. |
| 19 | 15mm internal diametre pipe line. |
| 20 | 20mm internal diametre pipe line. |
| 21 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 22 | Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect. |
| 23 | Providing and fixing in position concealedcistern including flushing plate of approvedmake (to the approval of the Engineer-incharge) complete in all respect. |
| 24 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 25 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 26 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm |
| 27 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 28 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 29 | Providing & Fixing in postion CP Brass bath tub spout with wall flange of approved make (to the approval of Engineer-in-charge) complete in all respect |
| 30 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 31 | C.P. brass towel bracket (610mm long) |
| 32 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 33 | CP brass Acrylic Shelf size 560mmx130mm |
| 34 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 35 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 36 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 37 | Size 1500mmx600mm |
| 38 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 39 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 40 | C.P. Brass extension piece, 25mm long to 50mm long |
| 41 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 42 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respe |
| 43 | C.P.brass 15mm Angular stop cock with Wall flange |
| 44 | C.P.brass 15mm Concealed stop cock with adjustable wall flange. |
| 45 | C.P. brass 3-Hole Basin Mixer Without Popup Waste System |
| 46 | C.P. brass overhead shower Φ180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange. |
| 47 | C.P. Brass Accessories: |
| 48 | C.P brass towel ring |
| 49 | C.P. brass toilet paper holder |
| 50 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect |
| 51 | Single lever concealed divertor for bath and shower system (3 inlet flow) with body and upper part |
| 52 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 53 | PVC tube connection of size 15 mm x 450 mm with Brass nut |
| 54 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 55 | 100mm i/d H.C.I. pipe lines laid complete |
| 56 | 75mm i/d H.C.I. pipe lines laid complete |
| 57 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 58 | 100mm i/d |
| 59 | 75mm i/d |
| 60 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 61 | With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) |
| 62 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 63 | For 100mm i/d pipes |
| 64 | 100mm i/d H.C.I. Heal Rest Bend |
| 65 | 100mm i/d Plain Tee |
| 66 | 100mm i/d Bend plain |
| 67 | 100mm i/d Collars |
| 68 | 100mm i/d Off sets 150mm projection |
| 69 | For 75mm i/d pipes |
| 70 | 75mm i/d Plain Tee |
| 71 | 75mm i/d Bend Plain |
| 72 | 75mm i/d Collars |
| 73 | Off sets 150mm Projection |
| 74 | Dismantling H.C.I Soil pipes including disposalas desired by the Engineer-in-Charge. |
| 75 | 100mm i/d H.C.I. pipe |
| 76 | 75mm i/d H.C.I. pipe |
| 77 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. |
| 78 | 100mm i/d H.C.I. specials |
| 79 | 75mm i/d H.C.I. specials |
| 80 | Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 mtr . complete in all respect as required by Engineer-in-Charge. |
| 81 | European W.C.,/indian/orissa wc |
| 82 | PVC / Chinaware Cistern |
| 83 | Wash Hand Basin / Urinal Pot / |
| 84 | CP bib cock/angle cock/stop cock |
| 85 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 86 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 87 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 88 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 89 | Plastic Ball Cock with rod and PlasticBall Providing and fixing in position automatic brass Ball Cock in tanks. 20mm i/d |
| 90 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 91 | Triple Layer Tanks |
| 92 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 93 | G.I. tank nipple 20mm i/d |
| 94 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect. |
| 95 | Renovation of Servant Bathroom |
| 96 | Supplying and filling cinder on roof (Ist story) including light ramming |
| 97 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (using mechanical mixer for mixing of material) |
| 98 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 99 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 100 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 101 | 15mm i/d |
| 102 | 20mm i/d |
| 103 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 104 | 15mm i/d |
| 105 | 20mm i/d |
| 106 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves |
| 107 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 108 | (b) Through wall 22.86 cm thick |
| 109 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. |
| 110 | 15mm internal diametre pipe line. |
| 111 | 20mm internal diametre pipe line. |
| 112 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the ngineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 113 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 114 | With C.P. Brass nut |
| 115 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern. |
| 116 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 117 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm |
| 118 | Size 550 mm x 400 mm x 815 mm |
| 119 | Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. |
| 120 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respects. |
| 121 | Providing and fixing in position paper holders of approved make (to the approval of Engineer- in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder |
| 122 | C.P. brass toilet paper holder |
| 123 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 124 | C.P. brass towel Rails size 15mm dia 425mm long |
| 125 | C.P brass towel ring |
| 126 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-in- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 127 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 128 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 129 | Size 600mmx450mm |
| 130 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 131 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 132 | C.P. Brass extension piece, 25mm long to 50mm long |
| 133 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 134 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 135 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 136 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 137 | C.P.brass 15mm Concealed stop cock with flange |
| 138 | C.P.brass 15mm Angle valve without flange |
| 139 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 140 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 141 | 100mm i/d H.C.I. pipe lines laid complete |
| 142 | 75mm i/d H.C.I. pipe lines laid complete |
| 143 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 144 | 100mm i/d |
| 145 | 75mm i/d |
| 146 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 147 | With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) |
| 148 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 149 | For 100mm i/d pipes |
| 150 | 100mm i/d H.C.I. Heal Rest Bend |
| 151 | 100mm i/d Plain Tee |
| 152 | 100mm i/d Bend plain |
| 153 | 100mm i/d Collars |
| 154 | For 75mm i/d pipes |
| 155 | 75mm i/d Plain Tee |
| 156 | 75mm i/d Collars |
| 157 | Off sets 75mm Projection |
| 158 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes 100mm i/d Off sets 150mm projection |
| 159 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. |
| 160 | 100mm i/d H.C.I. pipe |
| 161 | 75mm i/d H.C.I. pipe |
| 162 | Dismantling H.C.I specials including dismantalling of lead joints including cartage/disposal within 5 Km. |
| 163 | 100mm i/d H.C.I. specials |
| 164 | 75mm i/d H.C.I. specials |
| 165 | Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 mtr . complete in all respect as required by Engineer-in-Charge. |
| 166 | European W.C.,/indian/orissa wc |
| 167 | PVC / Chinaware Cistern |
| 168 | Wash Hand Basin / Urinal Pot / |
| 169 | CP bib cock/angle cock/stop cock |
| 170 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 171 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 172 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 173 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 174 | Renovation of Kitchen |
| 175 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (using mechanical mixer for mixing of material) |
| 176 | Extra labour for projected nosing of stair case of any shape and design. |
| 177 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 178 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete |
| 179 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 180 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 181 | 15mm i/d |
| 182 | 20mm i/d |
| 183 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 184 | 15mm i/d |
| 185 | 20mm i/d |
| 186 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 187 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 188 | (b) Through wall 22.86 cm thick |
| 189 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 190 | 20mm i/d |
| 191 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. |
| 192 | 15mm internal diametre pipe line. |
| 193 | 20mm internal diametre pipe line. |
| 194 | Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 195 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade-304 (18/8) with waste coupling complete in all respect. |
| 196 | Double bowl Sink without drain board Overall size 1114 x 490 mm with bow size 460x385x200mm including waste coupling |
| 197 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 50 mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 198 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 199 | C.P. Brass fittings: |
| 200 | C.P.brass 15mm Angular stop cock with Wall flange |
| 201 | C.P brass Sink mixer with swinging spout.(wall mounted) |
| 202 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 203 | (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 204 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 205 | 75mm i/d H.C.I. pipe lines laid complete |
| 206 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 207 | 75mm i/d |
| 208 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 209 | With 100mm x 75mm i/d Floor Trap(weighing 4.0 Kg) |
| 210 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 211 | For 75mm i/d pipes |
| 212 | 75mm i/d Plain Tee |
| 213 | For 100mm i/d pipes 100mm i/d Bend plain |
| 214 | 75mm i/d Collars |
| 215 | For 100mm i/d pipes 100mm i/d Off sets 150mm projection |
| 216 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 217 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 218 | Stainless Steel Sink /Mosaic Sink |
| 219 | CP Bib Cock/Angle Cock/StopCock/ Shower/ Bottle Trap |
| 220 | Wall mixer / Sink Mixer / Basin Mixer /Concealed Stop Cock |
| 221 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 222 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 223 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 224 | G.I. tank nipple 20mm i/d |
| 225 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 226 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. 75mm i/d H.C.I. pipe |
| 227 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. 75mm i/d H.C.I. specials |
| 228 | Drilling hole in Granite of size 1.25\\" (32 mm) for making of provision for fixing of Gas pipe complete in all respect. |
| 229 | Providing and fixing of kitchen cabinetries, depth 550 mm at bottom & 300 mm at top, made out of both side laminated board 18 mm thick with 8 mm thick teak ply on front shutters, along with all accessories such as stainless steel baskets, Masala rack (triple shelf), power coated Metabox of make \\"Ozone/Asian Paint\\", telescopic channel 20\\" long make \\"Ozone\\", adjustable legs upto 4\\" height for bottom cabinetries and 8 mm thick glass shelf, 5 mm thick glass for shutters and clamps to fix glass in shutters for top cabinetries including rubbers wood Cornish on top, machine Moulding for shutters, melamine polish, soft close hinges make \\"Ozone\\", Stainless Steel Handles 6\\" long etc. complete including carriage and labour charges for fixing at site complete in all respects. |
| 230 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect. |
| 231 | Less Rebate on old material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender