Tender For Providing And Renovation Of Public Health Services In 05 No. Main Bathrooms I.E. 4 No. Attached With Bedroom & 1 No. Office Bathroom; Renovation Of Kitchen; Renovation Of 1 No. Servant Bathroom & 1 No. Security Bathroom; Renovation Of 02 N
Tender Value
25.60 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
1 days left
EMD
51250
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Renovation Of Public Health Services In 05 No. Main Bathrooms I.E. 4 No. Attached With Bedroom & 1 No. Office Bathroom; Renovation Of Kitchen; Renovation Of 1 No. Servant Bathroom & 1 No. Security Bathroom; Renovation Of 02 No. Pantries In Servant And Security; Providing And Installing 12 No. Air Conditioners I.E., 05 No. Split Type Air Conditioner Of 2.0 Ton Cap., 01 No. Tower Type Air Conditioner Of 3.0 Tr. Cap. And 06 No. Split Type Air Conditioner Of 1.5 Tr. Capacity In Official Residence Of Sh. Deepak Bali, Advisor Punjab Heritage And Tourism Promotion Board, I.E. Kothi No. 959, Sector 39-A, Chandigarh And All Other Works Contingent Thereto.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of 05 No. Main Bathrooms |
| 2 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure (Brick work for concealed cistern complete in all respects.) |
| 3 | Screed of 50 mm thick cement concrete 1 : 8 : 16 with stone aggregate to be laid below the topping (using mechanical mixer for mixing of material). (A&C-11). |
| 4 | Extra Labour for Projected nosing of stair case of any shape and design. |
| 5 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 6 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 7 | Size 600x600 mm |
| 8 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 10 | (a) 15 mm i/d |
| 11 | (b) 20 mm i/d |
| 12 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 13 | (a) 15 mm i/d G.I. Union |
| 14 | (b) 20 mm i/d G.I. Union |
| 15 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 16 | 20mm i/d Gun Metal peet valve |
| 17 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 18 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 19 | Through wall 22.86 cm thick |
| 20 | Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda |
| 21 | Sewer connections upto 300 mm id |
| 22 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C.inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 23 | Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 24 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect. |
| 25 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 26 | Chinaware wall mounted E.W.C withoutcistern including seat cover complete inall respect. |
| 27 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 28 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in- charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 29 | Table Top size 49x 40 x 15 cm |
| 30 | Providing and fixing in position 32 mm dia G.I. waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge. |
| 31 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-incharge) complete in all respect. |
| 32 | Providing & Fixing in postion CP Brass bath tub spout with wall flange of approved make (to the approval of Engineer-in-charge) complete in all respect |
| 33 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 34 | C.P. brass towel bracket (610mm long) |
| 35 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 36 | CP brass Acrylic Shelf size 560mmx130mm |
| 37 | CP brass Corner Shelf size 560mmx130mm |
| 38 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 39 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 40 | Size 1500mmx600mm |
| 41 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 42 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 43 | C.P. Brass extension piece, 25mm long to 50mm long |
| 44 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 45 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respe |
| 46 | C.P. brass Pillar Cock foam flow |
| 47 | C.P.brass 15mm Angular stop cock with Wall flange |
| 48 | C.P.brass 15mm Concealed stop cock with adjustable wall flange. |
| 49 | C.P. brass 3-Hole Basin Mixer Without Popup Waste System |
| 50 | C.P. brass overhead shower Φ180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange. |
| 51 | C.P. Brass Accessories: |
| 52 | C.P brass towel ring |
| 53 | C.P. brass toilet paper holder |
| 54 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect |
| 55 | Single lever concealed divertor for bath and shower system (3 inlet flow) with body and upper part |
| 56 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 57 | PVC tube connection of size 15 mm x 300 mm with PTMT nut |
| 58 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 59 | 100mm i/d H.C.I. pipe lines laid complete |
| 60 | 75mm i/d H.C.I. pipe lines laid complete |
| 61 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 62 | 100mm i/d |
| 63 | 75mm i/d |
| 64 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 65 | With 100mm x 75mm i/d Floor Trap (weighing 4 Kg) |
| 66 | With 100mm x 75mm i/d Floor Trap(weighing 5.8 Kg) |
| 67 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 68 | For 100mm i/d pipes |
| 69 | 100mm i/d H.C.I. Heal Rest Bend |
| 70 | 100mm i/d Plain Tee |
| 71 | 100mm i/d Bend plain |
| 72 | 100mm i/d Collars |
| 73 | 100mm i/d Off sets 150mm projection |
| 74 | For 75mm i/d pipes |
| 75 | 75mm i/d Plain Tee |
| 76 | 75mm i/d Collars |
| 77 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 78 | Size 75 mm x 75 mm |
| 79 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 80 | Eurpoean/Indian/Orissa W.C., |
| 81 | PVC / China Ware Cistern |
| 82 | Wash Hand Basin / Urinal Pot |
| 83 | CP Bib Cock/Angle Cock |
| 84 | Wall mixer / Sink Mixer / Basin Mixer |
| 85 | Bathroom Accessories |
| 86 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 87 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 88 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 89 | Brass Ball Cock with rod and Plastic Ball |
| 90 | 20mm i/d |
| 91 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 92 | G.I. tank nipple 20mm i/d |
| 93 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 94 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 95 | Raising of Manhole cover including excavation, demolishing, brick work, plaster etc. complete in all respects. |
| 96 | Making RCC Slab For WHB Including Material and Labour Complete in all Respects. |
| 97 | Carriage of Malba from site of work to dumping ground. |
| 98 | Less Rebate on Old Materials. |
| 99 | Providing and installing Air Conditioners |
| 100 | Providing and installing O-General /Carrier Midea /Voltas / Toshiba/ Mitsubishi make with EER>3.5 Two Speed Model or any other equivalent make Slimpak Tower Type Air Conditioner of 3.0 Ton capacity suitable for 230 Volts Three phase supply with nature friendly refrigerant R410 or equivelant capable of performing the following functions :- (i) Cooling (ii) Dehumidifying (iii) Air Circulation (iv) Filtering including installation charges. |
| 101 | Supply and Installation of Toshiba/O-General/Carrier/Mitsubishi make 3-Star rating with EER>3.5 Fixed Speed Model (Cooling only without installation kit i.e. Copper Pipe) or any other equivalent make Split Type Air Conditioner of 1.5 Ton capacity suitable for 230 Volts single phase supply with nature friendly refrigerant R32 or equivelant capable of performing the following functions :- (i) Cooling (ii) Dehumidifying (iii) Air Circulation (iv) Filtering including installation charges. |
| 102 | Supply and Installation of Toshiba/O-General/Carrier/Mitsubishi make 2-Star rating with EER>3.5 Fixed Speed Model (Cooling only without installation kit i.e. Copper Pipe) or any other equivalent make Split Type Air Conditioner of 2.0 Ton capacity suitable for 230 Volts single phase supply with nature friendly refrigerant R32 or equivelant capable of performing the following functions :- (i) Cooling (ii) Dehumidifying (iii) Air Circulation (iv) Filtering including installation charges. |
| 103 | Providing and fixing Plug Top for fixing with stabilizer complete in all respect. |
| 104 | Providing and installing Automatic Voltage Stabilizer copper winding and having suitable range for input and output of 5 KVA capacity of reputed make along with Ampere Meter, Volt Meter & 3 core wire of 1½ metre length complete in all respect make V-Guard, Liv Guard, Luminous and any other equivalent make. |
| 105 | Providing and installing Automatic Voltage Stabilizer copper winding and having suitable range for input and output of 4 KVA capacity of reputed make along with Ampere Meter, Volt Meter & 3 core wire of 1½ metre length complete in all respect make V-Guard, Liv Guard, Luminous and any other equivalent make. |
| 106 | Providing and fixing refrigerant copper pipe (Type B) for Split type Air Conditioner including insulation complete in all respects of approved make. |
| 107 | Providing and fixing 15 mm i/d PVC drain pipe with insulation to prevent seepage in walls with specials for Split type Air Conditioner complete in all respects of approved make. |
| 108 | Providing and fixing PVC 70/76, 3 Core Electrical Wire for Split type Air Conditioner complete in all respects make Finolex, Havels or any other equivelant make. |
| 109 | Providing and fixing PVC 4 Core Power Cable for Split type Air Conditioner of make Finolex/Havels or any other equivelant make complete in all respects. |
| 110 | Providing and fixing powder coated angle iron stand heavy duty including grouting for out door unit complete in all respects. |
| 111 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 112 | Size 75 mm x 75 mm |
| 113 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 114 | Through wall 22.86 cm thick |
| 115 | Providing and fixing powder coated angle iron floors stand heavy duty for slimpac indoor units complete in all respects. |
| 116 | Credit for old Air Conditioners |
| 117 | Renovation of Kitchen |
| 118 | Screed of 50 mm thick cement concrete 1 : 8 : 16 with stone aggregate to be laid below the topping (using mechanical mixer for mixing of material). (A&C-11). |
| 119 | Extra Labour for Projected nosing of stair case of any shape and design. |
| 120 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 121 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 122 | Size 600x600 mm |
| 123 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 124 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 125 | 15mm i/d |
| 126 | 20mm i/d |
| 127 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 128 | 15mm i/d |
| 129 | 20mm i/d |
| 130 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 131 | 20mm i/d |
| 132 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 133 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 134 | (b) Through wall 22.86 cm thick |
| 135 | Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 136 | Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect. |
| 137 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade-304 (18/8) with waste coupling complete in all respect. |
| 138 | (d) Double bowl Sink without drain board Overall size 1114 x 490mm with bowl size 460x385x200mm including waste coupling |
| 139 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 140 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 50 mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 141 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 142 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 143 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 144 | C.P. Brass fittings: |
| 145 | C.P.brass 15mm Angular stop cock with Wall flange |
| 146 | C.P brass Sink mixer with swinging spout.(wall mounted) |
| 147 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 148 | (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 149 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 150 | 75mm i/d H.C.I. pipe lines laid complete |
| 151 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 152 | 75mm i/d |
| 153 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 154 | With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) |
| 155 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 156 | For 75mm i/d pipes |
| 157 | 75mm i/d Plain Tee |
| 158 | 75mm i/d Collars |
| 159 | Off sets 75mm projection |
| 160 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 161 | (a) Size 75 mm x 75 mm |
| 162 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 163 | G.I. tank nipple 20mm i/d |
| 164 | Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. |
| 165 | Vertical type |
| 166 | 25 litre capacity water heater |
| 167 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 168 | Stainless Steel Sink |
| 169 | CP Bib Cock/Angle Cock |
| 170 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 171 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 172 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 173 | Providing and fixing in position Chimney Sunflame / Faber make complete in all respects. |
| 174 | Providing and placing in position Four Way Burner of Sunflame / Faber make complete in all respects. |
| 175 | Drilling hole in Granite of size 1.25\\" (32 mm) for making of provision for fixing of Gas pipe complete in all respect. |
| 176 | Providing and fixing of kitchen cabinetries, depth 550 mm at bottom & 300 mm at top, made out of both side laminated board 18 mm thick with 8 mm thick teak ply on front shutters, along with all accessories such as stainless steel baskets, masala rack (triple shelf), power coated metabox of make \\"Ozone/Asian Paint\\", telescopic channel 20\\" long make \\"Ozone\\", adjustable legs upto 4\\" height for bottom cabinetries and 8 mm thick glass shelf, 5 mm thick glass for shutters and clamps to fix glass in shutters for top cabinetries including rubbers wood Cornish on top, machine moulding for shutters, melamine polish, soft close hinges make \\"Ozone\\", Stainless Steel Handles 6\\" long etc. complete including carriage and labour charges for fixing at site complete in all respects. |
| 177 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect. |
| 178 | Less Rebate on Old Materials. |
| 179 | Renovation of Pantries on GF and FF |
| 180 | Screed of 50 mm thick cement concrete 1 : 8 : 16 with stone aggregate to be laid below the topping (using mechanical mixer for mixing of material). (A&C-11). |
| 181 | Extra Labour for Projected nosing of stair case of any shape and design. |
| 182 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 183 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 184 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 185 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 186 | 15mm i/d |
| 187 | 20mm i/d |
| 188 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 189 | 15mm i/d |
| 190 | 20mm i/d |
| 191 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 192 | 20mm i/d |
| 193 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 194 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 195 | (b) Through wall 22.86 cm thick |
| 196 | Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 197 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade-304 (18/8) with waste coupling complete in all respect. |
| 198 | (a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm |
| 199 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 200 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 50 mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 201 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 202 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 203 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 204 | C.P. Brass 15 mm Angle valve without flange |
| 205 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 206 | (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 207 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 208 | 75mm i/d H.C.I. pipe lines laid complete |
| 209 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 210 | 75mm i/d |
| 211 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 212 | With 100mm x 75mm i/d Floor Trap (weighing 4 Kg) |
| 213 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 214 | For 75mm i/d pipes |
| 215 | 75mm i/d Plain Tee |
| 216 | 75mm i/d Collars |
| 217 | Off sets 75mm projection |
| 218 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 219 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 220 | (a) Size 75 mm x 75 mm |
| 221 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 222 | Stainless Steel Sink |
| 223 | CP Bib Cock/Angle Cock |
| 224 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 225 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 226 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 227 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 228 | G.I. tank nipple 20mm i/d |
| 229 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect. |
| 230 | Less Rebate on Old Materials. |
| 231 | Renovation of 01 No. Servant Bathroom & 01 No. Security Bathroom. |
| 232 | Screed of 50 mm thick cement concrete 1 : 8 : 16 with stone aggregate to be laid below the topping (using mechanical mixer for mixing of material). (A&C-11). |
| 233 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 234 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black ofsize 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 235 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 236 | 15mm i/d |
| 237 | 20mm i/d |
| 238 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.. |
| 239 | 15mm i/d G.I. Union |
| 240 | 20mm i/d G.I. Union |
| 241 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 242 | 15mm i/d Gun Metal peet valve |
| 243 | 20mm i/d Gun Metal peet valve |
| 244 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 245 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 246 | Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend. |
| 247 | Providing and fixing jet spray with 2'-6\\" long PVC pipe complete in all respect. |
| 248 | With C.P. Brass nut |
| 249 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern. |
| 250 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 251 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia without one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 252 | Size 550 mm x 400 mm x 815 mm |
| 253 | Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. |
| 254 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 255 | Providing and fixing in position paper holders of approved make (to the approval of Engineerin- charge ) fixed in to wall with C.P brass screws complete in all respect. |
| 256 | C.P. brass toilet paper holder |
| 257 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 258 | C.P. brass towel Rails size 15mm dia 610mm long |
| 259 | C.P brass towel ring |
| 260 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 261 | Providing & Fixing in position 5mm thickbevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect ( as required by the Engineer-in- Charge) |
| 262 | Size 600mmx450mm |
| 263 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 264 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 265 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 266 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 267 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 268 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 269 | C.P. Brass 15 mm Concealed Stop Cock with Flange |
| 270 | C.P. Brass 15 mm Angle valve without flange |
| 271 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 272 | (c) PVC tube connection of size 15 mm x 300 mm with C.P. PTMT nut |
| 273 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing |
| 274 | 100mm i/d H.C.I. pipe lines laid complete |
| 275 | 75mm i/d H.C.I. pipe lines laid complete |
| 276 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge |
| 277 | 100mm i/d |
| 278 | 75mm i/d |
| 279 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc |
| 280 | With 100mm x 75mm i/d Floor Trap(weighing 5.8 Kg) |
| 281 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining |
| 282 | For 100mm i/d pipes |
| 283 | 100mm i/d H.C.I. Heal Rest Bend |
| 284 | 100mm i/d Plain Tee |
| 285 | 100mm i/d Bend plain |
| 286 | 100mm i/d Collars |
| 287 | 100mm i/d Off sets 150mm projection |
| 288 | For 75mm i/d pipes |
| 289 | 75mm i/d Door Tee |
| 290 | 75mm i/d Bend Plain |
| 291 | 75mm i/d Collars |
| 292 | Offsets 150mm Projection |
| 293 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 294 | Eurpoean/Indian/Orissa W.C. |
| 295 | China Ware Cistern |
| 296 | Wash Hand Basin / Urinal Pot |
| 297 | CP Bib Cock/Angle Cock/StopCock/Shower/Bottle Trap |
| 298 | Wall mixer / Sink Mixer / Basin Mixer /Concealed Stop Cock |
| 299 | Bathroom Assessories such as Soap Dish,Towel Rail, Towel Ring, Towel Bracket,Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 300 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 301 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 302 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 303 | Brass Ball Cock with rod and Plastic Ball |
| 304 | 20mm i/d |
| 305 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 306 | Triple Layer Tanks |
| 307 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. |
| 308 | G.I. tank nipple 20mm i/d |
| 309 | Providing and fixing 1 BHP Electrical Mono Block Pump of Crompton make having section delivery 25mm etc. complete in all respects. |
| 310 | Providing and fixing Autocut Sensor for booster pump of reputed make as per approval of Engineer in charge. |
| 311 | Providing and installing Additional Auto cut sensor of reputed make as per approval of Engineer in charge. |
| 312 | Providing and fixing of Electrical wire of 4mm size for auto cut sensor including cost of material and labour complete Job. |
| 313 | Providing and fixing MS Angle Iron Shed with fibre sheet on top fixing with rivets as per approval of Engineer in charge including cost of material and labour complete in all respects. |
| 314 | Carriage of Malba from site of work to dumping ground. |
| 315 | Less Rebate on Old Materials. |
| 316 | Geyser and Shower Enclouser |
| 317 | Providing and installing in position premium range water pressure boosting pump of GRUNDFOS make or equivalent (To the approval of Engineer-in-charge) including all pump accessaries but excluding cost of G.I pipe & specials complete in all respects. |
| 318 | Pressure pump of 0.9 HP with 4700 LPH, 27.3meter head with SS pump & 24 litre capacity TankModel : |
| 319 | Providing and Fixing in position Glass shower enclosure L shaped 8mm thick with chrome finish with sliding door and entry from the front of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 320 | 1200x800 x 1950mm |
| 321 | Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. |
| 322 | Vertical type |
| 323 | 40 litre capacity water heater |
| 324 | Credit for old 05 No. Geysers @ 1000.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender