Tender For Annual Plan-2025-26 Pro.No.164/25 Anganavadi Maintenence Ward 14 Kodakara Gp-Building Maintenance-General Civil Work
Tender Value
3.88 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
6 days left
EMD
9723
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Plan-2025-26 Pro.No.164/25 Anganavadi Maintenence Ward 14 Kodakara Gp-Building Maintenance-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Puthukkavu anganwadi no:25 (Ward-14) maintenance |
| 2 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | OD404910/2025-2026:Modified 50.10.2 and 10.16 Steel work for purlin /single section with (round, square orrectangular hollow tubes etc.) trusses etc.,including cutting, hoisting, fixing position and applying a priming coat of approved steelprimer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 4 | OD405175/2025-2026:1.002-Specification code: OD204514/2023-2024Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness withzinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyEST No. :LSGD/CELSGD/EST/105913/2023_5_1_1 (Edit Id : 6)(Dsor year : 2018,Cost Index (Place : Trichur,Value : 135.59),GST : 18%Printed On 2024-01-18 22:52:19.86 1primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length upto 12 metre or as desired by Engineer-in-charge. Thesheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. |
| 5 | OD404913/2025-2026:1.002-Specification code: OD57177/2022-2023 :Providing and fixing Sheet roofing accessories 0.40 mm (+ 0.05%) total coatedthickness, zinc coating 150 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinccoating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheetand polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridgesplain (500-600mm) |
| 6 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 7 | 26.40:Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \\"L\\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 8 | 10.25.1:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 9 | OD405730/2025-2026:RAINWATER GUTTER UPVC - 150*100mmProviding and fixing FRP Rain water collection gutter pipe 3 mm thick or nearest available sizewith step jointing of 50mm at site (150 mm) of approved make including cost of necessaryfittings, labour for fixing, scaffolding charge etc. complete |
| 10 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 11 | OD525379/2025-2026:Supplying and Fixing Name Board as directed by dept. Officers Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender