Tender For Repairing & Renovation Works Of Quarters At Primary Tier (Phc-Bedded & Bphcs/Rhs) Health Facility Under Various Districts Of West Bengal.----Internal & External electrical installation Works Of Diff. Quarters At Puyan P.H.C., Dantan-Ii Blo
Tender Value
9.45 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
17 days left
EMD
18908
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing & Renovation Works Of Quarters At Primary Tier (Phc-Bedded & Bphcs/Rhs) Health Facility Under Various Districts Of West Bengal.----Internal & External electrical installation Works Of Diff. Quarters At Puyan P.H.C., Dantan-Ii Block, Paschim Medinipur.
BOQ
| Sl. No. | Item Description |
| 1 | E.I. work of 2nos. M.O quarter, 1nos. Nurses quarter.Cost for dismantiling the existing SPNDB, junction box, switch board distribution wire accessories without damage other appliences and ckt and refixing the same as per EIC instruction for further utilisation in presence of authorised supervisor & expert electrician. |
| 2 | Supplying and fixing 240V, DP, 32Amp Sheet steel Main Switches on flat iron frame on wall /existing Industrial panel (PWD SOR 2017, D-1/1a) |
| 3 | Supply and fixing of size 2 ft x 2ft x 6\\" ply wood board fixing with necessary arrangement incl. S & F of 1 no. 32A porcilane fuse base breeze as per direction of EIC. |
| 4 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 5 | 12 way , Double door |
| 6 | 16 way, Double door |
| 7 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single pole 6- 32A |
| 10 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as requiredachment fixed on wall incl. mending good damages to original finish. |
| 11 | Group A |
| 12 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required |
| 13 | 4 Module (125mmX75mm) |
| 14 | 6 Module (200mmX75mm) |
| 15 | 12 Module (200mmX150mm) |
| 16 | Supplying and fixing following modular switch/ socketon the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 17 | 5/6 A switch |
| 18 | 3 pin 5/6 A socket outlet |
| 19 | 15/16 A switch |
| 20 | 6 pin 15/16 A socket outlet |
| 21 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 22 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 23 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 24 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 25 | Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.. ( For AC connection) |
| 26 | Supply & Fixing 240 V, 25A Modular switch type DP MCB (C-Curve) (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. ( For AC connection) |
| 27 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wireetc. |
| 28 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connection. ( For AC connection) |
| 29 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 30 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required ( Make- Finolex/KEI/RR Cable/Gloster as per EIC) |
| 31 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (DP Isolator to SPNDB connection) |
| 32 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (AC connection) |
| 33 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For power plug wiring connection) |
| 34 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ECC |
| 35 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 36 | 2.5 sqmm copper wire |
| 37 | 4.0 sqmm copper wire |
| 38 | 6.0 sqmm copper wire |
| 39 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required--By TATA GI pipe |
| 40 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 41 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 42 | External E.I. WorkSITC of hooded type feeder pilar box with both side accessible fabricated of 3 mm thick sheet with standing top portion of size 900(H) X 700(W) x 500 (D) mm with 4 nos angle iron leg with double locking arrangement with lock & keys, air vent on side face comprising of the following electrical equipments and making necy. connection and painting by phosphatised powder coated two layer paint as per direction of EIC. The box should be comprising of the following accessories: |
| 43 | INCOMING : - (1) S&F 415V, 63 A TPN SFU with 3 nos Fuse link --- 1no. (2) S&F R,Y,B Indication lamp ----3 nos (3) S&F 6A SP 10KA Control MCB ---- 3 nos(4) S&F Neutral Link ---- 1 nos |
| 44 | BUSBAR ARRANGEMENT : - 1) S&F 415V, 125A ,Aluminium busbar (4 x 20 x 5)mm with 400mm long each (for 3 Phases & neutral) -1no |
| 45 | OUTGOING : - (1) S&F 415 V,32 A TPN SFU with 3 nos Fuse link each --- 2 nos (2) S&F Neutral Link ---- 2 nos |
| 46 | TIMER DB:- S & F street/ outdoor light timer DB (water proof) fixing on MS structure back side of Main switches/Busbar chambers incl inter connection with suitable size of copper wire and neutral link and provision for earthing attacnment & frabricated with following items as per instruction of EIC. i) S & F single dial 24 Hrs Digital Timer. Make - L&T (AUTS02DIG00) - 1 Nos.ii) S & F 40 A Capacity TP Power Contactor incliding NO/NC auxiliar contact Make - L&T ( MNX 40 ) - 1 Nosiii) S & F 230V, 6A, AC troggle switch for bypass arrangement.- 1 No.iv) S & F 415 V, 40A ,FP MCB ( Make L & T /Legrand ) - 1 Nosv) S & F LED Indication Lamp for ON/OFF ( Make L & T /ABB) - 2 Nosvi) S & F 4 way MS Stud ( bolt type) bakelite molded terminal with spring washer & nuts as required ( for Incoming Line termination )- 1 Nos.The complete arrangement of Timer DB must have wiring by PVC insulated suitable 4 sqmm copper wire ( For Power Line) & 1.5 sqmm control wiring ( For Control Line) with copper socketing at the wire end portion. |
| 47 | MUFFING:-Fedder pilar will be installed on the muffing, dimension-500mm(H)x850mm(L)x550mm(W). Cable entry & exit provision will be in this muffing. The complete arrangement must be wired by suitable size PVC insulated Cu wire with suitable sockets/lugs. with suitable arrangement. (Make- Legrand/ ABB/ Standard as per EIC) |
| 48 | Supply & Delivery of 9 Mtr GI Tubular Pole (Zindal /Bansal/ Utkarsh/Calcutta pole) as per specification Type 410 SP -30 as overall length 9 mtr weight 133kg. & having diamention are : Out side dia & thickness of the Bottom section ( 139.7 x 5.40) mm; Middle;(114.3 x 4.50) mm ,Top Section (88.9x3.25) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd as per direction of EIC. |
| 49 | SITC of single dip galvanized steel 40NB overhang bracket ( Swan Neck Type/As per direction of the EIC ) at the top of the pole having 1.5 M length complete with all fixing arrangements as required including painting. Double Arm |
| 50 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 Meter and upto 10.0 Meter |
| 51 | providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box |
| 52 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. |
| 53 | Supply only 1.1 kv grade 4 core 16 sqmm, non-influneable, high grade aluminium armoured cable. (Make-RR Cable/Havells/ Gloster as per EIC) |
| 54 | Supply only 1.1 kv grade 2 core 10 sqmm, non-influneable, high grade aluminium armoured cable.( Make-RR Cable/Havells/ Gloster as per EIC) |
| 55 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 56 | Upto 35 sq. mm |
| 57 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as require , |
| 58 | i) 4 X 16 sq. mm (28mm) |
| 59 | ii) 2 X 10 sq. mm (19mm) |
| 60 | S & F 19 mm heavy guage polythene pipe (Parrot gold Make) in GI octagonal pole and another accessories as required. |
| 61 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 22/0.3 (1.5 sqmm) |
| 62 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 63 | 90 watt |
| 64 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required--By TATA GI pipe |
| 65 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 66 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. |
| 67 | 32 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender